X-Git-Url: https://git.saurik.com/apple/xnu.git/blobdiff_plain/43866e378188c25dd1e2208016ab3cbeb086ae6c..7ee9d059c4eecf68ae4f8b0fb99ae2471eda79af:/bsd/sys/vnode.h diff --git a/bsd/sys/vnode.h b/bsd/sys/vnode.h index 0ddf130b7..965518cb0 100644 --- a/bsd/sys/vnode.h +++ b/bsd/sys/vnode.h @@ -1,16 +1,19 @@ /* - * Copyright (c) 2000-2002 Apple Computer, Inc. All rights reserved. + * Copyright (c) 2000-2010 Apple Inc. All rights reserved. * - * @APPLE_LICENSE_HEADER_START@ - * - * Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved. + * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ * * This file contains Original Code and/or Modifications of Original Code * as defined in and that are subject to the Apple Public Source License * Version 2.0 (the 'License'). You may not use this file except in - * compliance with the License. Please obtain a copy of the License at - * http://www.opensource.apple.com/apsl/ and read it before using this - * file. + * compliance with the License. The rights granted to you under the License + * may not be used to create, or enable the creation or redistribution of, + * unlawful or unlicensed copies of an Apple operating system, or to + * circumvent, violate, or enable the circumvention or violation of, any + * terms of an Apple operating system software license agreement. + * + * Please obtain a copy of the License at + * http://www.opensource.apple.com/apsl/ and read it before using this file. * * The Original Code and all software distributed under the License are * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER @@ -20,7 +23,7 @@ * Please see the License for the specific language governing rights and * limitations under the License. * - * @APPLE_LICENSE_HEADER_END@ + * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ */ /* Copyright (c) 1995 NeXT Computer, Inc. All Rights Reserved */ /* @@ -63,19 +66,11 @@ #include #include -#include -#include - -#include -#include - -#include #ifdef KERNEL -#include -#include -#endif /* KERNEL */ +#include +#include +#endif -#ifdef __APPLE_API_PRIVATE /* * The vnode is the focus of all file activity in UNIX. There is a * unique vnode allocated for each active file, each current directory, @@ -96,329 +91,597 @@ enum vtype { VNON, VREG, VDIR, VBLK, VCHR, VLNK, VSOCK, VFIFO, VBAD, VSTR, enum vtagtype { VT_NON, VT_UFS, VT_NFS, VT_MFS, VT_MSDOSFS, VT_LFS, VT_LOFS, VT_FDESC, VT_PORTAL, VT_NULL, VT_UMAP, VT_KERNFS, VT_PROCFS, VT_AFS, VT_ISOFS, - VT_UNION, VT_HFS, VT_VOLFS, VT_DEVFS, VT_WEBDAV, VT_UDF, VT_AFP, - VT_CDDA, VT_CIFS,VT_OTHER}; + VT_UNION, VT_HFS, VT_ZFS, VT_DEVFS, VT_WEBDAV, VT_UDF, VT_AFP, + VT_CDDA, VT_CIFS, VT_OTHER}; + /* - * Each underlying filesystem allocates its own private area and hangs - * it from v_data. If non-null, this area is freed in getnewvnode(). + * flags for VNOP_BLOCKMAP */ -LIST_HEAD(buflists, buf); +#define VNODE_READ 0x01 +#define VNODE_WRITE 0x02 -#define MAX_CLUSTERS 4 /* maximum number of vfs clusters per vnode */ -struct v_cluster { - unsigned int start_pg; - unsigned int last_pg; -}; -struct v_padded_clusters { - long v_pad; - struct v_cluster v_c[MAX_CLUSTERS]; -}; +/* flags for VNOP_ALLOCATE */ +#define PREALLOCATE 0x00000001 /* preallocate allocation blocks */ +#define ALLOCATECONTIG 0x00000002 /* allocate contigious space */ +#define ALLOCATEALL 0x00000004 /* allocate all requested space */ + /* or no space at all */ +#define FREEREMAINDER 0x00000008 /* deallocate allocated but */ + /* unfilled blocks */ +#define ALLOCATEFROMPEOF 0x00000010 /* allocate from the physical eof */ +#define ALLOCATEFROMVOL 0x00000020 /* allocate from the volume offset */ /* - * Reading or writing any of these items requires holding the appropriate lock. - * v_freelist is locked by the global vnode_free_list simple lock. - * v_mntvnodes is locked by the global mntvnodes simple lock. - * v_flag, v_usecount, v_holdcount and v_writecount are - * locked by the v_interlock simple lock. - */ -struct vnode { - u_long v_flag; /* vnode flags (see below) */ - long v_usecount; /* reference count of users */ - long v_holdcnt; /* page & buffer references */ - daddr_t v_lastr; /* last read (read-ahead) */ - u_long v_id; /* capability identifier */ - struct mount *v_mount; /* ptr to vfs we are in */ - int (**v_op)(void *); /* vnode operations vector */ - TAILQ_ENTRY(vnode) v_freelist; /* vnode freelist */ - LIST_ENTRY(vnode) v_mntvnodes; /* vnodes for mount point */ - struct buflists v_cleanblkhd; /* clean blocklist head */ - struct buflists v_dirtyblkhd; /* dirty blocklist head */ - long v_numoutput; /* num of writes in progress */ - enum vtype v_type; /* vnode type */ - union { - struct mount *vu_mountedhere;/* ptr to mounted vfs (VDIR) */ - struct socket *vu_socket; /* unix ipc (VSOCK) */ - struct specinfo *vu_specinfo; /* device (VCHR, VBLK) */ - struct fifoinfo *vu_fifoinfo; /* fifo (VFIFO) */ - } v_un; - struct ubc_info *v_ubcinfo; /* valid for (VREG) */ - struct nqlease *v_lease; /* Soft reference to lease */ - daddr_t v_lastw; /* last write (write cluster) */ - daddr_t v_cstart; /* start block of cluster */ - daddr_t v_ciosiz; /* real size of I/O for cluster */ - int v_clen; /* length of current cluster */ - int v_ralen; /* Read-ahead length */ - daddr_t v_maxra; /* last readahead block */ - union { - simple_lock_data_t v_ilk; /* lock on usecount and flag */ - struct v_padded_clusters v_cl; /* vfs cluster IO */ - } v_un1; -#define v_clusters v_un1.v_cl.v_c -#define v_interlock v_un1.v_ilk - - struct lock__bsd__ *v_vnlock; /* used for non-locking fs's */ - long v_writecount; /* reference count of writers */ - enum vtagtype v_tag; /* type of underlying data */ - void *v_data; /* private data for fs */ -}; -#define v_mountedhere v_un.vu_mountedhere -#define v_socket v_un.vu_socket -#define v_specinfo v_un.vu_specinfo -#define v_fifoinfo v_un.vu_fifoinfo - -/* - * Vnode flags. - */ -#define VROOT 0x000001 /* root of its file system */ -#define VTEXT 0x000002 /* vnode is a pure text prototype */ -#define VSYSTEM 0x000004 /* vnode being used by kernel */ -#define VISTTY 0x000008 /* vnode represents a tty */ -#define VWASMAPPED 0x000010 /* vnode was mapped before */ -#define VTERMINATE 0x000020 /* terminating memory object */ -#define VTERMWANT 0x000040 /* wating for memory object death */ -#define VMOUNT 0x000080 /* mount operation in progress */ -#define VXLOCK 0x000100 /* vnode is locked to change underlying type */ -#define VXWANT 0x000200 /* process is waiting for vnode */ -#define VBWAIT 0x000400 /* waiting for output to complete */ -#define VALIASED 0x000800 /* vnode has an alias */ -#define VORECLAIM 0x001000 /* vm object is being reclaimed */ -#define VNOCACHE_DATA 0x002000 /* don't keep data cached once it's been consumed */ -#define VSTANDARD 0x004000 /* vnode obtained from common pool */ -#define VAGE 0x008000 /* Insert vnode at head of free list */ -#define VRAOFF 0x010000 /* read ahead disabled */ -#define VUINIT 0x020000 /* ubc_info being initialized */ -#define VUWANT 0x040000 /* process is wating for VUINIT */ -#define VUINACTIVE 0x080000 /* UBC vnode is on inactive list */ -#define VHASDIRTY 0x100000 /* UBC vnode may have 1 or more */ - /* delayed dirty pages that need to be flushed at the next 'sync' */ -#define VSWAP 0x200000 /* vnode is being used as swapfile */ -#define VTHROTTLED 0x400000 /* writes or pageouts have been throttled */ - /* wakeup tasks waiting when count falls below threshold */ -#define VNOFLUSH 0x800000 /* don't vflush() if SKIPSYSTEM */ - - -/* - * Vnode attributes. A field value of VNOVAL represents a field whose value - * is unavailable (getattr) or which is not to be changed (setattr). - */ -struct vattr { - enum vtype va_type; /* vnode type (for create) */ - u_short va_mode; /* files access mode and type */ - short va_nlink; /* number of references to file */ - uid_t va_uid; /* owner user id */ - gid_t va_gid; /* owner group id */ - long va_fsid; /* file system id (dev for now) */ - long va_fileid; /* file id */ - u_quad_t va_size; /* file size in bytes */ - long va_blocksize; /* blocksize preferred for i/o */ - struct timespec va_atime; /* time of last access */ - struct timespec va_mtime; /* time of last modification */ - struct timespec va_ctime; /* time file changed */ - u_long va_gen; /* generation number of file */ - u_long va_flags; /* flags defined for file */ - dev_t va_rdev; /* device the special file represents */ - u_quad_t va_bytes; /* bytes of disk space held by file */ - u_quad_t va_filerev; /* file modification number */ - u_int va_vaflags; /* operations flags, see below */ - long va_spare; /* remain quad aligned */ + * Token indicating no attribute value yet assigned. some user source uses this + */ +#define VNOVAL (-1) + + +#ifdef KERNEL + +/* + * Flags for ioflag. + */ +#define IO_UNIT 0x0001 /* do I/O as atomic unit */ +#define IO_APPEND 0x0002 /* append write to end */ +#define IO_SYNC 0x0004 /* do I/O synchronously */ +#define IO_NODELOCKED 0x0008 /* underlying node already locked */ +#define IO_NDELAY 0x0010 /* FNDELAY flag set in file table */ +#define IO_NOZEROFILL 0x0020 /* F_SETSIZE fcntl uses to prevent zero filling */ +#ifdef XNU_KERNEL_PRIVATE +#define IO_REVOKE IO_NOZEROFILL /* revoked close for tty, will Not be used in conjunction */ +#endif /* XNU_KERNEL_PRIVATE */ +#define IO_TAILZEROFILL 0x0040 /* zero fills at the tail of write */ +#define IO_HEADZEROFILL 0x0080 /* zero fills at the head of write */ +#define IO_NOZEROVALID 0x0100 /* do not zero fill if valid page */ +#define IO_NOZERODIRTY 0x0200 /* do not zero fill if page is dirty */ +#define IO_CLOSE 0x0400 /* I/O issued from close path */ +#define IO_NOCACHE 0x0800 /* same effect as VNOCACHE_DATA, but only for this 1 I/O */ +#define IO_RAOFF 0x1000 /* same effect as VRAOFF, but only for this 1 I/O */ +#define IO_DEFWRITE 0x2000 /* defer write if vfs.defwrite is set */ +#define IO_PASSIVE 0x4000 /* this I/O is marked as background I/O so it won't throttle Throttleable I/O */ +#define IO_BACKGROUND IO_PASSIVE /* used for backward compatibility. to be removed after IO_BACKGROUND is no longer + * used by DiskImages in-kernel mode */ +#define IO_NOAUTH 0x8000 /* No authorization checks. */ +#define IO_NODIRECT 0x10000 /* don't use direct synchronous writes if IO_NOCACHE is specified */ + + +/* + * Component Name: this structure describes the pathname + * information that is passed through the VNOP interface. + */ +struct componentname { + /* + * Arguments to lookup. + */ + uint32_t cn_nameiop; /* lookup operation */ + uint32_t cn_flags; /* flags (see below) */ +#ifdef BSD_KERNEL_PRIVATE + vfs_context_t cn_context; + struct nameidata *cn_ndp; /* pointer back to nameidata */ + +/* XXX use of these defines are deprecated */ +#define cn_proc (cn_context->vc_proc + 0) /* non-lvalue */ +#define cn_cred (cn_context->vc_ucred + 0) /* non-lvalue */ + +#else + void * cn_reserved1; /* use vfs_context_t */ + void * cn_reserved2; /* use vfs_context_t */ +#endif + /* + * Shared between lookup and commit routines. + */ + char *cn_pnbuf; /* pathname buffer */ + int cn_pnlen; /* length of allocated buffer */ + char *cn_nameptr; /* pointer to looked up name */ + int cn_namelen; /* length of looked up component */ + uint32_t cn_hash; /* hash value of looked up name */ + uint32_t cn_consume; /* chars to consume in lookup() */ }; /* - * Flags for va_vaflags. + * component name operations (for VNOP_LOOKUP) */ -#define VA_UTIMES_NULL 0x01 /* utimes argument was NULL */ -#define VA_EXCLUSIVE 0x02 /* exclusive create request */ +#define LOOKUP 0 /* perform name lookup only */ +#define CREATE 1 /* setup for file creation */ +#define DELETE 2 /* setup for file deletion */ +#define RENAME 3 /* setup for file renaming */ +#define OPMASK 3 /* mask for operation */ /* - * Flags for ioflag. + * component name operational modifier flags */ -#define IO_UNIT 0x01 /* do I/O as atomic unit */ -#define IO_APPEND 0x02 /* append write to end */ -#define IO_SYNC 0x04 /* do I/O synchronously */ -#define IO_NODELOCKED 0x08 /* underlying node already locked */ -#define IO_NDELAY 0x10 /* FNDELAY flag set in file table */ -#define IO_NOZEROFILL 0x20 /* F_SETSIZE fcntl uses to prevent zero filling */ -#define IO_TAILZEROFILL 0x40 /* zero fills at the tail of write */ -#define IO_HEADZEROFILL 0x80 /* zero fills at the head of write */ -#define IO_NOZEROVALID 0x100 /* do not zero fill if valid page */ -#define IO_NOZERODIRTY 0x200 /* do not zero fill if page is dirty */ +#define FOLLOW 0x00000040 /* follow symbolic links */ +#define NOTRIGGER 0x10000000 /* don't trigger automounts */ /* - * Modes. Some values same as Ixxx entries from inode.h for now. + * component name parameter descriptors. */ -#define VSUID 04000 /* set user id on execution */ -#define VSGID 02000 /* set group id on execution */ -#define VSVTX 01000 /* save swapped text even after use */ -#define VREAD 00400 /* read, write, execute permissions */ -#define VWRITE 00200 -#define VEXEC 00100 +#define ISDOTDOT 0x00002000 /* current component name is .. */ +#define MAKEENTRY 0x00004000 /* entry is to be added to name cache */ +#define ISLASTCN 0x00008000 /* this is last component of pathname */ +#define ISWHITEOUT 0x00020000 /* OBSOLETE: found whiteout */ +#define DOWHITEOUT 0x00040000 /* OBSOLETE: do whiteouts */ + +/* The following structure specifies a vnode for creation */ +struct vnode_fsparam { + struct mount * vnfs_mp; /* mount point to which this vnode_t is part of */ + enum vtype vnfs_vtype; /* vnode type */ + const char * vnfs_str; /* File system Debug aid */ + struct vnode * vnfs_dvp; /* The parent vnode */ + void * vnfs_fsnode; /* inode */ + int (**vnfs_vops)(void *); /* vnode dispatch table */ + int vnfs_markroot; /* is this a root vnode in FS (not a system wide one) */ + int vnfs_marksystem; /* is a system vnode */ + dev_t vnfs_rdev; /* dev_t for block or char vnodes */ + off_t vnfs_filesize; /* that way no need for getattr in UBC */ + struct componentname * vnfs_cnp; /* component name to add to namecache */ + uint32_t vnfs_flags; /* flags */ +}; + +#define VNFS_NOCACHE 0x01 /* do not add to name cache at this time */ +#define VNFS_CANTCACHE 0x02 /* never add this instance to the name cache */ +#define VNFS_ADDFSREF 0x04 /* take fs (named) reference */ + +#define VNCREATE_FLAVOR 0 +#define VCREATESIZE sizeof(struct vnode_fsparam) + + +#ifdef KERNEL_PRIVATE /* - * Token indicating no attribute value yet assigned. + * Resolver callback SPI for trigger vnodes + * + * Only available from kernels built with CONFIG_TRIGGERS option */ -#define VNOVAL (-1) -#ifdef KERNEL +/*! + @enum Pathname Lookup Operations + @abstract Constants defining pathname operations (passed to resolver callbacks) + */ +enum path_operation { + OP_LOOKUP, + OP_MOUNT, + OP_UNMOUNT, + OP_STATFS, + OP_OPEN, + OP_LINK, + OP_UNLINK, + OP_RENAME, + OP_CHDIR, + OP_CHROOT, + OP_MKNOD, + OP_MKFIFO, + OP_SYMLINK, + OP_ACCESS, + OP_PATHCONF, + OP_READLINK, + OP_GETATTR, + OP_SETATTR, + OP_TRUNCATE, + OP_COPYFILE, + OP_MKDIR, + OP_RMDIR, + OP_REVOKE, + OP_EXCHANGEDATA, + OP_SEARCHFS, + OP_FSCTL, + OP_GETXATTR, + OP_SETXATTR, + OP_REMOVEXATTR, + OP_LISTXATTR, + OP_MAXOP /* anything beyond previous entry is invalid */ +}; + /* - * Convert between vnode types and inode formats (since POSIX.1 - * defines mode word of stat structure in terms of inode formats). + * is operation a traditional trigger (autofs)? + * 1 if trigger, 0 if no trigger */ -extern enum vtype iftovt_tab[]; -extern int vttoif_tab[]; -#define IFTOVT(mode) (iftovt_tab[((mode) & S_IFMT) >> 12]) -#define VTTOIF(indx) (vttoif_tab[(int)(indx)]) -#define MAKEIMODE(indx, mode) (int)(VTTOIF(indx) | (mode)) +extern int vfs_istraditionaltrigger(enum path_operation op, const struct componentname *cnp); + +/*! + @enum resolver status + @abstract Constants defining resolver status + @constant RESOLVER_RESOLVED the resolver has finished (typically means a successful mount) + @constant RESOLVER_NOCHANGE the resolver status didn't change + @constant RESOLVER_UNRESOLVED the resolver has finished (typically means a successful unmount) + @constant RESOLVER_ERROR the resolver encountered an error (errno passed in aux value) + @constant RESOLVER_STOP a request to destroy trigger XXX do we need this??? + */ +enum resolver_status { + RESOLVER_RESOLVED, + RESOLVER_NOCHANGE, + RESOLVER_UNRESOLVED, + RESOLVER_ERROR, + RESOLVER_STOP +}; + +typedef uint64_t resolver_result_t; /* - * Flags to various vnode functions. + * Compound resolver result + * + * The trigger vnode callbacks use a compound result value. In addition + * to the resolver status, it contains a sequence number and an auxiliary + * value. + * + * The sequence value is used by VFS to sequence-stamp trigger vnode + * state transitions. It is expected to be incremented each time a + * resolver changes state (ie resolved or unresolved). A result + * containing a stale sequence (older than a trigger vnode's current + * value) will be ignored by VFS. + * + * The auxiliary value is currently only used to deliver the errno + * value for RESOLVER_ERROR status conditions. When a RESOLVER_ERROR + * occurs, VFS will propagate this error back to the syscall that + * encountered the trigger vnode. */ -#define SKIPSYSTEM 0x0001 /* vflush: skip vnodes marked VSYSTEM */ -#define FORCECLOSE 0x0002 /* vflush: force file closeure */ -#define WRITECLOSE 0x0004 /* vflush: only close writeable files */ -#define SKIPSWAP 0x0008 /* vflush: skip vnodes marked VSWAP */ +extern resolver_result_t vfs_resolver_result(uint32_t seq, enum resolver_status stat, int aux); -#define DOCLOSE 0x0008 /* vclean: close active files */ +/* + * Extract values from a compound resolver result + */ +extern enum resolver_status vfs_resolver_status(resolver_result_t); +extern uint32_t vfs_resolver_sequence(resolver_result_t); +extern int vfs_resolver_auxiliary(resolver_result_t); -#define V_SAVE 0x0001 /* vinvalbuf: sync file first */ -#define V_SAVEMETA 0x0002 /* vinvalbuf: leave indirect blocks */ -#define REVOKEALL 0x0001 /* vop_revoke: revoke all aliases */ +/*! + @typedef trigger_vnode_resolve_callback_t + @abstract function prototype for a trigger vnode resolve callback + @discussion This function is associated with a trigger vnode during a vnode create. It is + typically called when a lookup operation occurs for a trigger vnode + @param vp The trigger vnode which needs resolving + @param cnp Various data about lookup, e.g. filename and state flags + @param pop The pathname operation that initiated the lookup (see enum path_operation). + @param flags + @param data Arbitrary data supplied by vnode trigger creator + @param ctx Context for authentication. + @return RESOLVER_RESOLVED, RESOLVER_NOCHANGE, RESOLVER_UNRESOLVED or RESOLVER_ERROR +*/ +typedef resolver_result_t (* trigger_vnode_resolve_callback_t)( + vnode_t vp, + const struct componentname * cnp, + enum path_operation pop, + int flags, + void * data, + vfs_context_t ctx); -/* flags for vop_allocate */ -#define PREALLOCATE 0x00000001 /* preallocate allocation blocks */ -#define ALLOCATECONTIG 0x00000002 /* allocate contigious space */ -#define ALLOCATEALL 0x00000004 /* allocate all requested space */ - /* or no space at all */ -#define FREEREMAINDER 0x00000008 /* deallocate allocated but */ - /* unfilled blocks */ -#define ALLOCATEFROMPEOF 0x00000010 /* allocate from the physical eof */ -#define ALLOCATEFROMVOL 0x00000020 /* allocate from the volume offset */ +/*! + @typedef trigger_vnode_unresolve_callback_t + @abstract function prototype for a trigger vnode unresolve callback + @discussion This function is associated with a trigger vnode during a vnode create. It is + called to unresolve a trigger vnode (typically this means unmount). + @param vp The trigger vnode which needs unresolving + @param flags Unmount flags + @param data Arbitrary data supplied by vnode trigger creator + @param ctx Context for authentication. + @return RESOLVER_NOCHANGE, RESOLVER_UNRESOLVED or RESOLVER_ERROR +*/ +typedef resolver_result_t (* trigger_vnode_unresolve_callback_t)( + vnode_t vp, + int flags, + void * data, + vfs_context_t ctx); -#if DIAGNOSTIC -#define VATTR_NULL(vap) vattr_null(vap) -#define HOLDRELE(vp) holdrele(vp) -#define VHOLD(vp) vhold(vp) +/*! + @typedef trigger_vnode_rearm_callback_t + @abstract function prototype for a trigger vnode rearm callback + @discussion This function is associated with a trigger vnode during a vnode create. It is + called to verify a rearm from VFS (i.e. should VFS rearm the trigger?). + @param vp The trigger vnode which needs rearming + @param flags + @param data Arbitrary data supplied by vnode trigger creator + @param ctx Context for authentication. + @return RESOLVER_NOCHANGE or RESOLVER_ERROR +*/ +typedef resolver_result_t (* trigger_vnode_rearm_callback_t)( + vnode_t vp, + int flags, + void * data, + vfs_context_t ctx); -void holdrele __P((struct vnode *)); -void vattr_null __P((struct vattr *)); -void vhold __P((struct vnode *)); -#else -#define VATTR_NULL(vap) (*(vap) = va_null) /* initialize a vattr */ -#define HOLDRELE(vp) holdrele(vp) /* decrease buf or page ref */ -extern __inline void holdrele(struct vnode *vp) -{ - simple_lock(&vp->v_interlock); - vp->v_holdcnt--; - simple_unlock(&vp->v_interlock); -} -#define VHOLD(vp) vhold(vp) /* increase buf or page ref */ -extern __inline void vhold(struct vnode *vp) -{ - simple_lock(&vp->v_interlock); - if (++vp->v_holdcnt <= 0) - panic("vhold: v_holdcnt"); - simple_unlock(&vp->v_interlock); -} -#endif /* DIAGNOSTIC */ - -#define VREF(vp) vref(vp) -void vref __P((struct vnode *)); -#define NULLVP ((struct vnode *)NULL) +/*! + @typedef trigger_vnode_reclaim_callback_t + @abstract function prototype for a trigger vnode reclaim callback + @discussion This function is associated with a trigger vnode during a vnode create. It is + called to deallocate private callback argument data + @param vp The trigger vnode associated with the data + @param data The arbitrary data supplied by vnode trigger creator +*/ +typedef void (* trigger_vnode_reclaim_callback_t)( + vnode_t vp, + void * data); -/* - * Global vnode data. +/*! + @function vnode_trigger_update + @abstract Update a trigger vnode's state. + @discussion This allows a resolver to notify VFS of a state change in a trigger vnode. + @param vp The trigger vnode whose information to update. + @param result A compound resolver result value + @return EINVAL if result value is invalid or vp isn't a trigger vnode */ -extern struct vnode *rootvnode; /* root (i.e. "/") vnode */ -extern int desiredvnodes; /* number of vnodes desired */ -extern struct vattr va_null; /* predefined null vattr structure */ +extern int vnode_trigger_update(vnode_t vp, resolver_result_t result); + +struct vnode_trigger_info { + trigger_vnode_resolve_callback_t vti_resolve_func; + trigger_vnode_unresolve_callback_t vti_unresolve_func; + trigger_vnode_rearm_callback_t vti_rearm_func; + trigger_vnode_reclaim_callback_t vti_reclaim_func; + void * vti_data; /* auxiliary data (optional) */ + uint32_t vti_flags; /* optional flags (see below) */ +}; /* - * Macro/function to check for client cache inconsistency w.r.t. leasing. + * SPI for creating a trigger vnode + * + * Uses the VNCREATE_TRIGGER flavor with existing vnode_create() KPI + * + * Only one resolver per vnode. + * + * ERRORS (in addition to vnode_create errors): + * EINVAL (invalid resolver info, like invalid flags) + * ENOTDIR (only directories can have a resolver) + * EPERM (vnode cannot be a trigger - eg root dir of a file system) + * ENOMEM */ -#define LEASE_READ 0x1 /* Check lease for readers */ -#define LEASE_WRITE 0x2 /* Check lease for modifiers */ -#endif /* KERNEL */ +struct vnode_trigger_param { + struct vnode_fsparam vnt_params; /* same as for VNCREATE_FLAVOR */ + trigger_vnode_resolve_callback_t vnt_resolve_func; + trigger_vnode_unresolve_callback_t vnt_unresolve_func; + trigger_vnode_rearm_callback_t vnt_rearm_func; + trigger_vnode_reclaim_callback_t vnt_reclaim_func; + void * vnt_data; /* auxiliary data (optional) */ + uint32_t vnt_flags; /* optional flags (see below) */ +}; + +#define VNCREATE_TRIGGER (('T' << 8) + ('V')) +#define VNCREATE_TRIGGER_SIZE sizeof(struct vnode_trigger_param) /* - * Mods for exensibility. + * vnode trigger flags (vnt_flags) + * + * VNT_AUTO_REARM: + * On unmounts of a trigger mount, automatically re-arm the trigger. + * + * VNT_NO_DIRECT_MOUNT: + * A trigger vnode instance that doesn't directly trigger a mount, + * instead it triggers the mounting of sub-trigger nodes. */ +#define VNT_AUTO_REARM (1 << 0) +#define VNT_NO_DIRECT_MOUNT (1 << 1) +#define VNT_VALID_MASK (VNT_AUTO_REARM | VNT_NO_DIRECT_MOUNT) + +#endif /* KERNEL_PRIVATE */ + /* - * Flags for vdesc_flags: + * Vnode attributes, new-style. + * + * The vnode_attr structure is used to transact attribute changes and queries + * with the filesystem. + * + * Note that this structure may be extended, but existing fields must not move. */ -#define VDESC_MAX_VPS 16 -/* Low order 16 flag bits are reserved for willrele flags for vp arguments. */ -#define VDESC_VP0_WILLRELE 0x0001 -#define VDESC_VP1_WILLRELE 0x0002 -#define VDESC_VP2_WILLRELE 0x0004 -#define VDESC_VP3_WILLRELE 0x0008 -#define VDESC_NOMAP_VPP 0x0100 -#define VDESC_VPP_WILLRELE 0x0200 + +#define VATTR_INIT(v) do {(v)->va_supported = (v)->va_active = 0ll; (v)->va_vaflags = 0;} while(0) +#define VATTR_SET_ACTIVE(v, a) ((v)->va_active |= VNODE_ATTR_ ## a) +#define VATTR_SET_SUPPORTED(v, a) ((v)->va_supported |= VNODE_ATTR_ ## a) +#define VATTR_IS_SUPPORTED(v, a) ((v)->va_supported & VNODE_ATTR_ ## a) +#define VATTR_CLEAR_ACTIVE(v, a) ((v)->va_active &= ~VNODE_ATTR_ ## a) +#define VATTR_CLEAR_SUPPORTED(v, a) ((v)->va_supported &= ~VNODE_ATTR_ ## a) +#define VATTR_IS_ACTIVE(v, a) ((v)->va_active & VNODE_ATTR_ ## a) +#define VATTR_ALL_SUPPORTED(v) (((v)->va_active & (v)->va_supported) == (v)->va_active) +#define VATTR_INACTIVE_SUPPORTED(v) do {(v)->va_active &= ~(v)->va_supported; (v)->va_supported = 0;} while(0) +#define VATTR_SET(v, a, x) do { (v)-> a = (x); VATTR_SET_ACTIVE(v, a);} while(0) +#define VATTR_WANTED(v, a) VATTR_SET_ACTIVE(v, a) +#define VATTR_RETURN(v, a, x) do { (v)-> a = (x); VATTR_SET_SUPPORTED(v, a);} while(0) +#define VATTR_NOT_RETURNED(v, a) (VATTR_IS_ACTIVE(v, a) && !VATTR_IS_SUPPORTED(v, a)) /* - * VDESC_NO_OFFSET is used to identify the end of the offset list - * and in places where no such field exists. + * Two macros to simplify conditional checking in kernel code. */ -#define VDESC_NO_OFFSET -1 +#define VATTR_IS(v, a, x) (VATTR_IS_SUPPORTED(v, a) && (v)-> a == (x)) +#define VATTR_IS_NOT(v, a, x) (VATTR_IS_SUPPORTED(v, a) && (v)-> a != (x)) + +#define VNODE_ATTR_va_rdev (1LL<< 0) /* 00000001 */ +#define VNODE_ATTR_va_nlink (1LL<< 1) /* 00000002 */ +#define VNODE_ATTR_va_total_size (1LL<< 2) /* 00000004 */ +#define VNODE_ATTR_va_total_alloc (1LL<< 3) /* 00000008 */ +#define VNODE_ATTR_va_data_size (1LL<< 4) /* 00000010 */ +#define VNODE_ATTR_va_data_alloc (1LL<< 5) /* 00000020 */ +#define VNODE_ATTR_va_iosize (1LL<< 6) /* 00000040 */ +#define VNODE_ATTR_va_uid (1LL<< 7) /* 00000080 */ +#define VNODE_ATTR_va_gid (1LL<< 8) /* 00000100 */ +#define VNODE_ATTR_va_mode (1LL<< 9) /* 00000200 */ +#define VNODE_ATTR_va_flags (1LL<<10) /* 00000400 */ +#define VNODE_ATTR_va_acl (1LL<<11) /* 00000800 */ +#define VNODE_ATTR_va_create_time (1LL<<12) /* 00001000 */ +#define VNODE_ATTR_va_access_time (1LL<<13) /* 00002000 */ +#define VNODE_ATTR_va_modify_time (1LL<<14) /* 00004000 */ +#define VNODE_ATTR_va_change_time (1LL<<15) /* 00008000 */ +#define VNODE_ATTR_va_backup_time (1LL<<16) /* 00010000 */ +#define VNODE_ATTR_va_fileid (1LL<<17) /* 00020000 */ +#define VNODE_ATTR_va_linkid (1LL<<18) /* 00040000 */ +#define VNODE_ATTR_va_parentid (1LL<<19) /* 00080000 */ +#define VNODE_ATTR_va_fsid (1LL<<20) /* 00100000 */ +#define VNODE_ATTR_va_filerev (1LL<<21) /* 00200000 */ +#define VNODE_ATTR_va_gen (1LL<<22) /* 00400000 */ +#define VNODE_ATTR_va_encoding (1LL<<23) /* 00800000 */ +#define VNODE_ATTR_va_type (1LL<<24) /* 01000000 */ +#define VNODE_ATTR_va_name (1LL<<25) /* 02000000 */ +#define VNODE_ATTR_va_uuuid (1LL<<26) /* 04000000 */ +#define VNODE_ATTR_va_guuid (1LL<<27) /* 08000000 */ +#define VNODE_ATTR_va_nchildren (1LL<<28) /* 10000000 */ +#define VNODE_ATTR_va_dirlinkcount (1LL<<29) /* 20000000 */ +#define VNODE_ATTR_va_addedtime (1LL<<30) /* 40000000 */ +#define VNODE_ATTR_BIT(n) (VNODE_ATTR_ ## n) +/* + * Read-only attributes. + */ +#define VNODE_ATTR_RDONLY (VNODE_ATTR_BIT(va_rdev) | \ + VNODE_ATTR_BIT(va_nlink) | \ + VNODE_ATTR_BIT(va_total_size) | \ + VNODE_ATTR_BIT(va_total_alloc) | \ + VNODE_ATTR_BIT(va_data_alloc) | \ + VNODE_ATTR_BIT(va_iosize) | \ + VNODE_ATTR_BIT(va_fileid) | \ + VNODE_ATTR_BIT(va_linkid) | \ + VNODE_ATTR_BIT(va_parentid) | \ + VNODE_ATTR_BIT(va_fsid) | \ + VNODE_ATTR_BIT(va_filerev) | \ + VNODE_ATTR_BIT(va_gen) | \ + VNODE_ATTR_BIT(va_name) | \ + VNODE_ATTR_BIT(va_type) | \ + VNODE_ATTR_BIT(va_nchildren) | \ + VNODE_ATTR_BIT(va_dirlinkcount)| \ + VNODE_ATTR_BIT(va_addedtime)) /* - * This structure describes the vnode operation taking place. + * Attributes that can be applied to a new file object. */ -struct vnodeop_desc { - int vdesc_offset; /* offset in vector--first for speed */ - char *vdesc_name; /* a readable name for debugging */ - int vdesc_flags; /* VDESC_* flags */ +#define VNODE_ATTR_NEWOBJ (VNODE_ATTR_BIT(va_rdev) | \ + VNODE_ATTR_BIT(va_uid) | \ + VNODE_ATTR_BIT(va_gid) | \ + VNODE_ATTR_BIT(va_mode) | \ + VNODE_ATTR_BIT(va_flags) | \ + VNODE_ATTR_BIT(va_acl) | \ + VNODE_ATTR_BIT(va_create_time) | \ + VNODE_ATTR_BIT(va_modify_time) | \ + VNODE_ATTR_BIT(va_change_time) | \ + VNODE_ATTR_BIT(va_encoding) | \ + VNODE_ATTR_BIT(va_type) | \ + VNODE_ATTR_BIT(va_uuuid) | \ + VNODE_ATTR_BIT(va_guuid)) + + +struct vnode_attr { + /* bitfields */ + uint64_t va_supported; + uint64_t va_active; /* - * These ops are used by bypass routines to map and locate arguments. - * Creds and procs are not needed in bypass routines, but sometimes - * they are useful to (for example) transport layers. - * Nameidata is useful because it has a cred in it. - */ - int *vdesc_vp_offsets; /* list ended by VDESC_NO_OFFSET */ - int vdesc_vpp_offset; /* return vpp location */ - int vdesc_cred_offset; /* cred location, if any */ - int vdesc_proc_offset; /* proc location, if any */ - int vdesc_componentname_offset; /* if any */ - /* - * Finally, we've got a list of private data (about each operation) - * for each transport layer. (Support to manage this list is not - * yet part of BSD.) + * Control flags. The low 16 bits are reserved for the + * ioflags being passed for truncation operations. */ - caddr_t *vdesc_transports; -}; + int va_vaflags; + + /* traditional stat(2) parameter fields */ + dev_t va_rdev; /* device id (device nodes only) */ + uint64_t va_nlink; /* number of references to this file */ + uint64_t va_total_size; /* size in bytes of all forks */ + uint64_t va_total_alloc; /* disk space used by all forks */ + uint64_t va_data_size; /* size in bytes of the fork managed by current vnode */ + uint64_t va_data_alloc; /* disk space used by the fork managed by current vnode */ + uint32_t va_iosize; /* optimal I/O blocksize */ -#endif /* __APPLE_API_PRIVATE */ + /* file security information */ + uid_t va_uid; /* owner UID */ + gid_t va_gid; /* owner GID */ + mode_t va_mode; /* posix permissions */ + uint32_t va_flags; /* file flags */ + struct kauth_acl *va_acl; /* access control list */ -#ifdef KERNEL + /* timestamps */ + struct timespec va_create_time; /* time of creation */ + struct timespec va_access_time; /* time of last access */ + struct timespec va_modify_time; /* time of last data modification */ + struct timespec va_change_time; /* time of last metadata change */ + struct timespec va_backup_time; /* time of last backup */ + + /* file parameters */ + uint64_t va_fileid; /* file unique ID in filesystem */ + uint64_t va_linkid; /* file link unique ID */ + uint64_t va_parentid; /* parent ID */ + uint32_t va_fsid; /* filesystem ID */ + uint64_t va_filerev; /* file revision counter */ /* XXX */ + uint32_t va_gen; /* file generation count */ /* XXX - relationship of + * these two? */ + /* misc parameters */ + uint32_t va_encoding; /* filename encoding script */ + + enum vtype va_type; /* file type (create only) */ + char * va_name; /* Name for ATTR_CMN_NAME; MAXPATHLEN bytes */ + guid_t va_uuuid; /* file owner UUID */ + guid_t va_guuid; /* file group UUID */ + + /* Meaningful for directories only */ + uint64_t va_nchildren; /* Number of items in a directory */ + uint64_t va_dirlinkcount; /* Real references to dir (i.e. excluding "." and ".." refs) */ + + /* add new fields here only */ +#ifdef BSD_KERNEL_PRIVATE + struct kauth_acl *va_base_acl; +#else + void * va_reserved1; +#endif /* BSD_KERNEL_PRIVATE */ + struct timespec va_addedtime; /* timestamp when item was added to parent directory */ + + +}; -#ifdef __APPLE_API_PRIVATE /* - * A list of all the operation descs. + * Flags for va_vaflags. */ -extern struct vnodeop_desc *vnodeop_descs[]; +#define VA_UTIMES_NULL 0x010000 /* utimes argument was NULL */ +#define VA_EXCLUSIVE 0x020000 /* exclusive create request */ +#define VA_NOINHERIT 0x040000 /* Don't inherit ACLs from parent */ +#define VA_NOAUTH 0x080000 /* - * Interlock for scanning list of vnodes attached to a mountpoint + * Modes. Some values same as Ixxx entries from inode.h for now. */ -extern struct slock mntvnode_slock; +#define VSUID 0x800 /*04000*/ /* set user id on execution */ +#define VSGID 0x400 /*02000*/ /* set group id on execution */ +#define VSVTX 0x200 /*01000*/ /* save swapped text even after use */ +#define VREAD 0x100 /*00400*/ /* read, write, execute permissions */ +#define VWRITE 0x080 /*00200*/ +#define VEXEC 0x040 /*00100*/ /* - * This macro is very helpful in defining those offsets in the vdesc struct. - * - * This is stolen from X11R4. I ingored all the fancy stuff for - * Crays, so if you decide to port this to such a serious machine, - * you might want to consult Intrisics.h's XtOffset{,Of,To}. + * Convert between vnode types and inode formats (since POSIX.1 + * defines mode word of stat structure in terms of inode formats). */ -#define VOPARG_OFFSET(p_type,field) \ - ((int) (((char *) (&(((p_type)NULL)->field))) - ((char *) NULL))) -#define VOPARG_OFFSETOF(s_type,field) \ - VOPARG_OFFSET(s_type*,field) -#define VOPARG_OFFSETTO(S_TYPE,S_OFFSET,STRUCT_P) \ - ((S_TYPE)(((char*)(STRUCT_P))+(S_OFFSET))) +extern enum vtype iftovt_tab[]; +extern int vttoif_tab[]; +#define IFTOVT(mode) (iftovt_tab[((mode) & S_IFMT) >> 12]) +#define VTTOIF(indx) (vttoif_tab[(int)(indx)]) +#define MAKEIMODE(indx, mode) (int)(VTTOIF(indx) | (mode)) + +/* + * Flags to various vnode functions. + */ +#define SKIPSYSTEM 0x0001 /* vflush: skip vnodes marked VSYSTEM */ +#define FORCECLOSE 0x0002 /* vflush: force file closeure */ +#define WRITECLOSE 0x0004 /* vflush: only close writeable files */ +#define SKIPSWAP 0x0008 /* vflush: skip vnodes marked VSWAP */ +#define SKIPROOT 0x0010 /* vflush: skip root vnodes marked VROOT */ + +#define DOCLOSE 0x0008 /* vclean: close active files */ + +#define V_SAVE 0x0001 /* vinvalbuf: sync file first */ +#define V_SAVEMETA 0x0002 /* vinvalbuf: leave indirect blocks */ + +#define REVOKEALL 0x0001 /* vnop_revoke: revoke all aliases */ + +/* VNOP_REMOVE: do not delete busy files (Carbon remove file semantics) */ +#define VNODE_REMOVE_NODELETEBUSY 0x0001 + +/* VNOP_READDIR flags: */ +#define VNODE_READDIR_EXTENDED 0x0001 /* use extended directory entries */ +#define VNODE_READDIR_REQSEEKOFF 0x0002 /* requires seek offset (cookies) */ +#define VNODE_READDIR_SEEKOFF32 0x0004 /* seek offset values should fit in 32 bits */ + + +#define NULLVP ((struct vnode *)NULL) + +#ifndef BSD_KERNEL_PRIVATE +struct vnodeop_desc; +#endif + +extern int desiredvnodes; /* number of vnodes desired */ /* @@ -434,93 +697,1192 @@ struct vnodeopv_desc { struct vnodeopv_entry_desc *opv_desc_ops; /* null terminated list */ }; -/* - * A default routine which just returns an error. +/*! + @function vn_default_error + @abstract Default vnode operation to fill unsupported slots in vnode operation vectors. + @return ENOTSUP */ -int vn_default_error __P((void)); +int vn_default_error(void); /* * A generic structure. * This can be used by bypass routines to identify generic arguments. */ -struct vop_generic_args { +struct vnop_generic_args { struct vnodeop_desc *a_desc; /* other random data follows, presumably */ }; +#ifndef _KAUTH_ACTION_T +typedef int kauth_action_t; +# define _KAUTH_ACTION_T +#endif + +#include + +__BEGIN_DECLS + +/*! + @function vnode_create + @abstract Create and initialize a vnode. + @discussion Returns wth an iocount held on the vnode which must eventually be dropped with vnode_put(). + @param flavor Should be VNCREATE_FLAVOR. + @param size Size of the struct vnode_fsparam in "data". + @param data Pointer to a struct vnode_fsparam containing initialization information. + @param vpp Pointer to a vnode pointer, to be filled in with newly created vnode. + @return 0 for success, error code otherwise. + */ +errno_t vnode_create(uint32_t, uint32_t, void *, vnode_t *); + +/*! + @function vnode_addfsref + @abstract Mark a vnode as being stored in a filesystem hash. + @discussion Should only be called once on a vnode, and never if that vnode was created with VNFS_ADDFSREF. + There should be a corresponding call to vnode_removefsref() when the vnode is reclaimed; VFS assumes that a + n unused vnode will not be marked as referenced by a filesystem. + @param vp The vnode to mark. + @return Always 0. + */ +int vnode_addfsref(vnode_t); + +/*! + @function vnode_removefsref + @abstract Mark a vnode as no longer being stored in a filesystem hash. + @discussion Should only be called once on a vnode (during a reclaim), and only after the vnode has either been created with VNFS_ADDFSREF or marked by vnode_addfsref(). + @param vp The vnode to unmark. + @return Always 0. + */ +int vnode_removefsref(vnode_t); + +/*! + @function vnode_hasdirtyblks + @abstract Check if a vnode has dirty data waiting to be written to disk. + @discussion Note that this routine is unsynchronized; it is only a snapshot and its result may cease to be true at the moment it is returned.. + @param vp The vnode to test. + @return Nonzero if there are dirty blocks, 0 otherwise + */ +int vnode_hasdirtyblks(vnode_t); + +/*! + @function vnode_hascleanblks + @abstract Check if a vnode has clean buffers associated with it. + @discussion Note that this routine is unsynchronized; it is only a snapshot and its result may cease to be true at the moment it is returned.. + @param vp The vnode to test. + @return Nonzero if there are clean blocks, 0 otherwise. + */ +int vnode_hascleanblks(vnode_t); + +#define VNODE_ASYNC_THROTTLE 15 +/*! + @function vnode_waitforwrites + @abstract Wait for the number of pending writes on a vnode to drop below a target. + @param vp The vnode to monitor. + @param output_target Max pending write count with which to return. + @param slpflag Flags for msleep(). + @param slptimeout Frequency with which to force a check for completion; increments of 10 ms. + @param msg String to pass msleep() . + @return 0 for success, or an error value from msleep(). + */ +int vnode_waitforwrites(vnode_t, int, int, int, const char *); + +/*! + @function vnode_startwrite + @abstract Increment the count of pending writes on a vnode. + @param vp The vnode whose count to increment. + @return void. + */ +void vnode_startwrite(vnode_t); + +/*! + @function vnode_startwrite + @abstract Decrement the count of pending writes on a vnode . + @discussion Also wakes up threads waiting for the write count to drop, as in vnode_waitforwrites. + @param vp The vnode whose count to decrement. + @return void. + */ +void vnode_writedone(vnode_t); + +/*! + @function vnode_vtype + @abstract Return a vnode's type. + @param vp The vnode whose type to grab. + @return The vnode's type. + */ +enum vtype vnode_vtype(vnode_t); + +/*! + @function vnode_vid + @abstract Return a vnode's vid (generation number), which is constant from creation until reclaim. + @param vp The vnode whose vid to grab. + @return The vnode's vid. + */ +uint32_t vnode_vid(vnode_t); + +/*! + @function vnode_mountedhere + @abstract Returns a pointer to a mount placed on top of a vnode, should it exist. + @param vp The vnode from whom to take the covering mount. + @return Pointer to mount covering a vnode, or NULL if none exists. + */ +mount_t vnode_mountedhere(vnode_t vp); + +/*! + @function vnode_mount + @abstract Get the mount structure for the filesystem that a vnode belongs to. + @param vp The vnode whose mount to grab. + @return The mount, directly. + */ +mount_t vnode_mount(vnode_t); + +/*! + @function vnode_specrdev + @abstract Return the device id of the device associated with a special file. + @param vp The vnode whose device id to extract--vnode must be a special file. + @return The device id. + */ +dev_t vnode_specrdev(vnode_t); + +/*! + @function vnode_fsnode + @abstract Gets the filesystem-specific data associated with a vnode. + @param vp The vnode whose data to grab. + @return The filesystem-specific data, directly. + */ +void * vnode_fsnode(vnode_t); + +/*! + @function vnode_clearfsnode + @abstract Sets a vnode's filesystem-specific data to be NULL. + @discussion This routine should only be called when a vnode is no longer in use, i.e. during a VNOP_RECLAIM. + @param vp The vnode whose data to clear out. + @return void. + */ +void vnode_clearfsnode(vnode_t); + +/*! + @function vnode_isvroot + @abstract Determine if a vnode is the root of its filesystem. + @param vp The vnode to test. + @return Nonzero if the vnode is the root, 0 if it is not. + */ +int vnode_isvroot(vnode_t); + +/*! + @function vnode_issystem + @abstract Determine if a vnode is marked as a System vnode. + @param vp The vnode to test. + @return Nonzero if the vnode is a system vnode, 0 if it is not. + */ +int vnode_issystem(vnode_t); + +/*! + @function vnode_ismount + @abstract Determine if there is currently a mount occurring which will cover this vnode. + @discussion Note that this is only a snapshot; a mount may begin or end at any time. + @param vp The vnode to test. + @return Nonzero if there is a mount in progress, 0 otherwise. + */ +int vnode_ismount(vnode_t); + +/*! + @function vnode_isreg + @abstract Determine if a vnode is a regular file. + @param vp The vnode to test. + @return Nonzero if the vnode is of type VREG, 0 otherwise. + */ +int vnode_isreg(vnode_t); + +/*! + @function vnode_isdir + @abstract Determine if a vnode is a directory. + @param vp The vnode to test. + @return Nonzero if the vnode is of type VDIR, 0 otherwise. + */ +int vnode_isdir(vnode_t); + +/*! + @function vnode_islnk + @abstract Determine if a vnode is a symbolic link. + @param vp The vnode to test. + @return Nonzero if the vnode is of type VLNK, 0 otherwise. + */ +int vnode_islnk(vnode_t); + +/*! + @function vnode_isfifo + @abstract Determine if a vnode is a named pipe. + @param vp The vnode to test. + @return Nonzero if the vnode is of type VFIFO, 0 otherwise. + */ +int vnode_isfifo(vnode_t); + +/*! + @function vnode_isblk + @abstract Determine if a vnode is a block device special file. + @param vp The vnode to test. + @return Nonzero if the vnode is of type VBLK, 0 otherwise. + */ +int vnode_isblk(vnode_t); + +/*! + @function vnode_ischr + @abstract Determine if a vnode is a character device special file. + @param vp The vnode to test. + @return Nonzero if the vnode is of type VCHR, 0 otherwise. + */ +int vnode_ischr(vnode_t); + +/*! + @function vnode_isswap + @abstract Determine if a vnode is being used as a swap file. + @param vp The vnode to test. + @return Nonzero if the vnode is being used as swap, 0 otherwise. + */ +int vnode_isswap(vnode_t vp); + +#ifdef __APPLE_API_UNSTABLE +/*! + @function vnode_isnamedstream + @abstract Determine if a vnode is a named stream. + @param vp The vnode to test. + @return Nonzero if the vnode is a named stream, 0 otherwise. + */ +int vnode_isnamedstream(vnode_t); +#endif + +/*! + @function vnode_ismountedon + @abstract Determine if a vnode is a block device on which a filesystem has been mounted. + @discussion A block device marked as being mounted on cannot be opened. + @param vp The vnode to test. + @return Nonzero if the vnode is a block device on which an filesystem is mounted, 0 otherwise. + */ +int vnode_ismountedon(vnode_t); + +/*! + @function vnode_setmountedon + @abstract Set flags indicating that a block device vnode has been mounted as a filesystem. + @discussion A block device marked as being mounted on cannot be opened. + @param vp The vnode to set flags on, a block device. + @return void. + */ +void vnode_setmountedon(vnode_t); + +/*! + @function vnode_clearmountedon + @abstract Clear flags indicating that a block device vnode has been mounted as a filesystem. + @param vp The vnode to clear flags on, a block device. + @return void. + */ +void vnode_clearmountedon(vnode_t); + +/*! + @function vnode_isrecycled + @abstract Check if a vnode is dead or in the process of being killed (recycled). + @discussion This is only a snapshot: a vnode may start to be recycled, or go from dead to in use, at any time. + @param vp The vnode to test. + @return Nonzero if vnode is dead or being recycled, 0 otherwise. + */ +int vnode_isrecycled(vnode_t); + +/*! + @function vnode_isnocache + @abstract Check if a vnode is set to not have its data cached in memory (i.e. we write-through to disk and always read from disk). + @param vp The vnode to test. + @return Nonzero if vnode is set to not have data chached, 0 otherwise. + */ +int vnode_isnocache(vnode_t); + +/*! + @function vnode_israge + @abstract Check if a vnode is marked for rapid aging + @param vp The vnode to test. + @return Nonzero if vnode is marked for rapid aging, 0 otherwise + */ +int vnode_israge(vnode_t); + +/*! + @function vnode_needssnapshots + @abstract Check if a vnode needs snapshots events (regardless of its ctime status) + @param vp The vnode to test. + @return Nonzero if vnode needs snapshot events, 0 otherwise + */ +int vnode_needssnapshots(vnode_t); + +/*! + @function vnode_setnocache + @abstract Set a vnode to not have its data cached in memory (i.e. we write-through to disk and always read from disk). + @param vp The vnode whose flags to set. + @return void. + */ +void vnode_setnocache(vnode_t); + +/*! + @function vnode_clearnocache + @abstract Clear the flag on a vnode indicating that data should not be cached in memory (i.e. we write-through to disk and always read from disk). + @param vp The vnode whose flags to clear. + @return void. + */ +void vnode_clearnocache(vnode_t); + +/*! + @function vnode_isnoreadahead + @abstract Check if a vnode is set to not have data speculatively read in in hopes of future cache hits. + @param vp The vnode to test. + @return Nonzero if readahead is disabled, 0 otherwise. + */ +int vnode_isnoreadahead(vnode_t); + +/*! + @function vnode_setnoreadahead + @abstract Set a vnode to not have data speculatively read in in hopes of hitting in cache. + @param vp The vnode on which to prevent readahead. + @return void. + */ +void vnode_setnoreadahead(vnode_t); + +/*! + @function vnode_clearnoreadahead + @abstract Clear the flag indicating that a vnode should not have data speculatively read in. + @param vp The vnode whose flag to clear. + @return void. + */ +void vnode_clearnoreadahead(vnode_t); + +/* left only for compat reasons as User code depends on this from getattrlist, for ex */ + +/*! + @function vnode_settag + @abstract Set a vnode filesystem-specific "tag." + @discussion Sets a tag indicating which filesystem a vnode belongs to, e.g. VT_HFS, VT_UDF, VT_ZFS. The kernel never inspects this data, though the filesystem tags are defined in vnode.h; it is for the benefit of user programs via getattrlist. + @param vp The vnode whose tag to set. + @return void. + */ +void vnode_settag(vnode_t, int); + +/*! + @function vnode_tag + @abstract Get the vnode filesystem-specific "tag." + @discussion Gets the tag indicating which filesystem a vnode belongs to, e.g. VT_HFS, VT_UDF, VT_ZFS. The kernel never inspects this data, though the filesystem tags are defined in vnode.h; it is for the benefit of user programs via getattrlist. + @param vp The vnode whose tag to grab. + @return The tag. + */ +int vnode_tag(vnode_t); + +/*! + @function vnode_getattr + @abstract Get vnode attributes. + @discussion Desired attributes are set with VATTR_SET_ACTIVE and VNODE_ATTR* macros. Supported attributes are determined after call with VATTR_IS_SUPPORTED. + @param vp The vnode whose attributes to grab. + @param vap Structure containing: 1) A list of requested attributes 2) Space to indicate which attributes are supported and being returned 3) Space to return attributes. + @param ctx Context for authentication. + @return 0 for success or an error code. + */ +int vnode_getattr(vnode_t vp, struct vnode_attr *vap, vfs_context_t ctx); + +/*! + @function vnode_setattr + @abstract Set vnode attributes. + @discussion Attributes to set are marked with VATTR_SET_ACTIVE and VNODE_ATTR* macros. Attributes successfully set are determined after call with VATTR_IS_SUPPORTED. + @param vp The vnode whose attributes to set. + @param vap Structure containing: 1) A list of attributes to set 2) Space for values for those attributes 3) Space to indicate which attributes were set. + @param ctx Context for authentication. + @return 0 for success or an error code. + */ +int vnode_setattr(vnode_t vp, struct vnode_attr *vap, vfs_context_t ctx); + +/*! + @function vfs_rootvnode + @abstract Returns the root vnode with an iocount. + @discussion Caller must vnode_put() the root node when done. + @return Pointer to root vnode if successful; error code if there is a problem taking an iocount. + */ +vnode_t vfs_rootvnode(void); + +/*! + @function vnode_uncache_credentials + @abstract Clear out cached credentials on a vnode. + @discussion When we authorize an action on a vnode, we cache the credential that was authorized and the actions it was authorized for in case a similar request follows. This function destroys that caching. + @param vp The vnode whose cache to clear. + @return void. + */ +void vnode_uncache_credentials(vnode_t vp); + +/*! + @function vnode_setmultipath + @abstract Mark a vnode as being reachable by multiple paths, i.e. as a hard link. + @discussion "Multipath" vnodes can be reached through more than one entry in the filesystem, and so must be handled differently for caching and event notification purposes. A filesystem should mark a vnode with multiple hardlinks this way. + @param vp The vnode to mark. + @return void. + */ +void vnode_setmultipath(vnode_t vp); + +/*! + @function vnode_vfsmaxsymlen + @abstract Determine the maximum length of a symbolic link for the filesystem on which a vnode resides. + @param vp The vnode for which to get filesystem symlink size cap. + @return Max symlink length. + */ +uint32_t vnode_vfsmaxsymlen(vnode_t); + +/*! + @function vnode_vfsisrdonly + @abstract Determine if the filesystem to which a vnode belongs is mounted read-only. + @param vp The vnode for which to get filesystem writeability. + @return Nonzero if the filesystem is read-only, 0 otherwise. + */ +int vnode_vfsisrdonly(vnode_t); + +/*! + @function vnode_vfstypenum + @abstract Get the "type number" of the filesystem to which a vnode belongs. + @discussion This is an archaic construct; most filesystems are assigned a type number based on the order in which they are registered with the system. + @param vp The vnode whose filesystem to examine. + @return The type number of the fileystem to which the vnode belongs. + */ +int vnode_vfstypenum(vnode_t); + +/*! + @function vnode_vfsname + @abstract Get the name of the filesystem to which a vnode belongs. + @param vp The vnode whose filesystem to examine. + @param buf Destination for vfs name: should have size MFSNAMELEN or greater. + @return The name of the fileystem to which the vnode belongs. + */ +void vnode_vfsname(vnode_t, char *); + +/*! + @function vnode_vfs64bitready + @abstract Determine if the filesystem to which a vnode belongs is marked as ready to interact with 64-bit user processes. + @param vp The vnode whose filesystem to examine. + @return Nonzero if filesystem is marked ready for 64-bit interactions; 0 otherwise. + */ +int vnode_vfs64bitready(vnode_t); + +/* These should move to private ... not documenting for now */ +int vfs_context_get_special_port(vfs_context_t, int, ipc_port_t *); +int vfs_context_set_special_port(vfs_context_t, int, ipc_port_t); + +/*! + @function vfs_context_proc + @abstract Get the BSD process structure associated with a vfs_context_t. + @param ctx Context whose associated process to find. + @return Process if available, NULL otherwise. + */ +proc_t vfs_context_proc(vfs_context_t); + +/*! + @function vfs_context_ucred + @abstract Get the credential associated with a vfs_context_t. + @discussion Succeeds if and only if the context has a thread, the thread has a task, and the task has a BSD proc. + @param ctx Context whose associated process to find. + @return Process if available, NULL otherwise. + */ +kauth_cred_t vfs_context_ucred(vfs_context_t); + +/*! + @function vfs_context_pid + @abstract Get the process id of the BSD process associated with a vfs_context_t. + @param ctx Context whose associated process to find. + @return Process id. + */ +int vfs_context_pid(vfs_context_t); + +/*! + @function vfs_context_issignal + @abstract Get a bitfield of pending signals for the BSD process associated with a vfs_context_t. + @discussion The bitfield is constructed using the sigmask() macro, in the sense of bits |= sigmask(SIGSEGV). + @param ctx Context whose associated process to find. + @return Bitfield of pending signals. + */ +int vfs_context_issignal(vfs_context_t, sigset_t); + +/*! + @function vfs_context_suser + @abstract Determine if a vfs_context_t corresponds to the superuser. + @param ctx Context to examine. + @return Nonzero if context belongs to superuser, 0 otherwise. + */ +int vfs_context_suser(vfs_context_t); + +/*! + @function vfs_context_is64bit + @abstract Determine if a vfs_context_t corresponds to a 64-bit user process. + @param ctx Context to examine. + @return Nonzero if context is of 64-bit process, 0 otherwise. + */ +int vfs_context_is64bit(vfs_context_t); + +/*! + @function vfs_context_create + @abstract Create a new vfs_context_t with appropriate references held. + @discussion The context must be released with vfs_context_rele() when no longer in use. + @param ctx Context to copy, or NULL to use information from running thread. + @return The new context, or NULL in the event of failure. + */ +vfs_context_t vfs_context_create(vfs_context_t); + +/*! + @function vfs_context_rele + @abstract Release references on components of a context and deallocate it. + @discussion A context should not be referenced after vfs_context_rele has been called. + @param ctx Context to release. + @return Always 0. + */ +int vfs_context_rele(vfs_context_t); + +/*! + @function vfs_context_current + @abstract Get the vfs_context for the current thread, or the kernel context if there is no context for current thread. + @discussion Kexts should not use this function--it is preferred to use vfs_context_create(NULL) and vfs_context_rele(), which ensure proper reference counting of underlying structures. + @return Context for current thread, or kernel context if thread context is unavailable. + */ +vfs_context_t vfs_context_current(void); +#ifdef KERNEL_PRIVATE +int vfs_context_bind(vfs_context_t); + +/*! + @function vfs_ctx_skipatime + @abstract Check to see if this context should skip updating a vnode's access times. + @discussion This is currently tied to the vnode rapid aging process. If the process is marked for rapid aging, + then the kernel should not update vnodes it touches for access time purposes. This will check to see if the + specified process and/or thread is marked for rapid aging when it manipulates vnodes. + @param ctx The context being investigated. + @return 1 if we should skip access time updates. + @return 0 if we should NOT skip access time updates. + */ + +int vfs_ctx_skipatime(vfs_context_t ctx); + +#endif + +/*! + @function vflush + @abstract Reclaim the vnodes associated with a mount. + @param mp The mount whose vnodes to kill. + @param skipvp A specific vnode to not reclaim or to let interrupt an un-forced flush + @param flags Control which + @discussion This function is used to clear out the vnodes associated with a mount as part of the unmount process. + Its parameters can determine which vnodes to skip in the process and whether in-use vnodes should be forcibly reclaimed. + Filesystems should call this function from their unmount code, because VFS code will always call it with SKIPROOT | SKIPSWAP | SKIPSYSTEM; filesystems + must take care of such vnodes themselves. + SKIPSYSTEM skip vnodes marked VSYSTEM + FORCECLOSE force file closeure + WRITECLOSE only close writeable files + SKIPSWAP skip vnodes marked VSWAP + SKIPROOT skip root vnodes marked VROOT + @return 0 for success, EBUSY if vnodes were busy and FORCECLOSE was not set. + */ +int vflush(struct mount *mp, struct vnode *skipvp, int flags); + +/*! + @function vnode_get + @abstract Increase the iocount on a vnode. + @discussion If vnode_get() succeeds, the resulting io-reference must be dropped with vnode_put(). + This function succeeds unless the vnode in question is dead or in the process of dying AND the current iocount is zero. + This means that it can block an ongoing reclaim which is blocked behind some other iocount. + + On success, vnode_get() returns with an iocount held on the vnode; this type of reference is intended to be held only for short periods of time (e.g. + across a function call) and provides a strong guarantee about the life of the vnode; vnodes with positive iocounts cannot be + recycled, and an iocount is required for any operation on a vnode. However, vnode_get() does not provide any guarantees + about the identity of the vnode it is called on; unless there is a known existing iocount on the vnode at time the call is made, + it could be recycled and put back in use before the vnode_get() succeeds, so the caller may be referencing a + completely different vnode than was intended. vnode_getwithref() and vnode_getwithvid() + provide guarantees about vnode identity. + + @return 0 for success, ENOENT if the vnode is dead and without existing io-reference. + */ +int vnode_get(vnode_t); + +/*! + @function vnode_getwithvid + @abstract Increase the iocount on a vnode, checking that the vnode is alive and has not changed vid (i.e. been recycled) + @discussion If vnode_getwithvid() succeeds, the resulting io-reference must be dropped with vnode_put(). + This function succeeds unless the vnode in question is dead, in the process of dying, or has been recycled (and given a different vnode id). + The intended usage is that a vnode is stored and its vid (vnode_vid(vp)) recorded while an iocount is held (example: a filesystem hash). The + iocount is then dropped, and time passes (perhaps locks are dropped and picked back up). Subsequently, vnode_getwithvid() is called to get an iocount, + but we are alerted if the vnode has been recycled. + + On success, vnode_getwithvid() returns with an iocount held on the vnode; this type of reference is intended to be held only for short periods of time (e.g. + across a function call) and provides a strong guarantee about the life of the vnode. vnodes with positive iocounts cannot be + recycled. An iocount is required for any operation on a vnode. + @return 0 for success, ENOENT if the vnode is dead, in the process of being reclaimed, or has been recycled and reused. + */ +int vnode_getwithvid(vnode_t, uint32_t); + +#ifdef BSD_KERNEL_PRIVATE +int vnode_getwithvid_drainok(vnode_t, uint32_t); +#endif /* BSD_KERNEL_PRIVATE */ + +/*! + @function vnode_getwithref + @abstract Increase the iocount on a vnode on which a usecount (persistent reference) is held. + @discussion If vnode_getwithref() succeeds, the resulting io-reference must be dropped with vnode_put(). + vnode_getwithref() will succeed on dead vnodes; it should fail with ENOENT on vnodes which are in the process of being reclaimed. + Because it is only called with a usecount on the vnode, the caller is guaranteed that the vnode has not been + reused for a different file, though it may now be dead and have deadfs vnops (which return errors like EIO, ENXIO, ENOTDIR). + On success, vnode_getwithref() returns with an iocount held on the vnode; this type of reference is intended to be held only for short periods of time (e.g. + across a function call) and provides a strong guarantee about the life of the vnode. vnodes with positive iocounts cannot be + recycled. An iocount is required for any operation on a vnode. + @return 0 for success, ENOENT if the vnode is dead, in the process of being reclaimed, or has been recycled and reused. + */ +int vnode_getwithref(vnode_t); + +/*! + @function vnode_put + @abstract Decrement the iocount on a vnode. + @discussion vnode_put() is called to indicate that a vnode is no longer in active use. It removes the guarantee that a + vnode will not be recycled. This routine should be used to release io references no matter how they were obtained. + @param vp The vnode whose iocount to drop. + @return Always 0. + */ +int vnode_put(vnode_t); + +/*! + @function vnode_ref + @abstract Increment the usecount on a vnode. + @discussion If vnode_ref() succeeds, the resulting usecount must be released with vnode_rele(). vnode_ref() is called to obtain + a persistent reference on a vnode. This type of reference does not provide the same strong guarantee that a vnode will persist + as does an iocount--it merely ensures that a vnode will not be reused to represent a different file. However, a usecount may be + held for extended periods of time, whereas an iocount is intended to be obtained and released quickly as part of performing a + vnode operation. A holder of a usecount must call vnode_getwithref()/vnode_put() in order to perform any operations on that vnode. + @param vp The vnode on which to obtain a persistent reference. + @return 0 for success; ENOENT if the vnode is dead or in the process of being recycled AND the calling thread is not the vnode owner. + */ +int vnode_ref(vnode_t); + +/*! + @function vnode_rele + @abstract Decrement the usecount on a vnode. + @discussion vnode_rele() is called to relese a persistent reference on a vnode. Releasing the last usecount + opens the door for a vnode to be reused as a new file; it also triggers a VNOP_INACTIVE call to the filesystem, + though that will not happen immediately if there are outstanding iocount references. + @param vp The vnode whose usecount to drop. + @return void. + */ +void vnode_rele(vnode_t); + +/*! + @function vnode_isinuse + @abstract Determine if the number of persistent (usecount) references on a vnode is greater than a given count. + @discussion vnode_isinuse() compares a vnode's usecount (corresponding to vnode_ref() calls) to its refcnt parameter + (the number of references the caller expects to be on the vnode). Note that "kusecount" references, corresponding + to parties interested only in event notifications, e.g. open(..., O_EVTONLY), are not counted towards the total; the comparison is + (usecount - kusecount > recnt). It is + also important to note that the result is only a snapshot; usecounts can change from moment to moment, and the result of vnode_isinuse + may no longer be correct the very moment that the caller receives it. + @param vp The vnode whose use-status to check. + @param refcnt The threshold for saying that a vnode is in use. + @return void. + */ +int vnode_isinuse(vnode_t, int); + +/*! + @function vnode_recycle + @abstract Cause a vnode to be reclaimed and prepared for reuse. + @discussion Like all vnode KPIs, must be called with an iocount on the target vnode. + vnode_recycle() will mark that vnode for reclaim when all existing references are dropped. + @param vp The vnode to recycle. + @return 1 if the vnode was reclaimed (i.e. there were no existing references), 0 if it was only marked for future reclaim. + */ +int vnode_recycle(vnode_t); + +#ifdef KERNEL_PRIVATE + +#define VNODE_EVENT_DELETE 0x00000001 /* file was removed */ +#define VNODE_EVENT_WRITE 0x00000002 /* file or directory contents changed */ +#define VNODE_EVENT_EXTEND 0x00000004 /* ubc size increased */ +#define VNODE_EVENT_ATTRIB 0x00000008 /* attributes changed (suitable for permission changes if type unknown)*/ +#define VNODE_EVENT_LINK 0x00000010 /* link count changed */ +#define VNODE_EVENT_RENAME 0x00000020 /* vnode was renamed */ +#define VNODE_EVENT_PERMS 0x00000040 /* permissions changed: will cause a NOTE_ATTRIB */ +#define VNODE_EVENT_FILE_CREATED 0x00000080 /* file created in directory: will cause NOTE_WRITE */ +#define VNODE_EVENT_DIR_CREATED 0x00000100 /* directory created inside this directory: will cause NOTE_WRITE */ +#define VNODE_EVENT_FILE_REMOVED 0x00000200 /* file removed from this directory: will cause NOTE_WRITE */ +#define VNODE_EVENT_DIR_REMOVED 0x00000400 /* subdirectory from this directory: will cause NOTE_WRITE */ + +#ifdef BSD_KERNEL_PRIVATE +#define VNODE_NOTIFY_ATTRS (VNODE_ATTR_BIT(va_fsid) | \ + VNODE_ATTR_BIT(va_fileid)| \ + VNODE_ATTR_BIT(va_mode) | \ + VNODE_ATTR_BIT(va_uid) | \ + VNODE_ATTR_BIT(va_gid) | \ + VNODE_ATTR_BIT(va_dirlinkcount) | \ + VNODE_ATTR_BIT(va_nlink)) + + + +#endif /* BSD_KERNEL_PRIVATE */ + +/*! + @function vnode_notify + @abstract Send a notification up to VFS. + @param vp Vnode for which to provide notification. + @param vap Attributes for that vnode, to be passed to fsevents. + @discussion Filesystem determines which attributes to pass up using + vfs_get_notify_attributes(&vap). The most specific events possible should be passed, + e.g. VNODE_EVENT_FILE_CREATED on a directory rather than just VNODE_EVENT_WRITE, but + a less specific event can be passed up if more specific information is not available. + Will not reenter the filesystem. + @return 0 for success, else an error code. + */ +int vnode_notify(vnode_t, uint32_t, struct vnode_attr*); + +/*! + @function vnode_ismonitored + @abstract Check whether a file has watchers that would make it useful to query a server + for file changes. + @param vp Vnode to examine. + @discussion Will not reenter the filesystem. + @return Zero if not monitored, nonzero if monitored. + */ +int vnode_ismonitored(vnode_t); + + +/*! + @function vnode_isdyldsharedcache + @abstract Check whether a file is a dyld shared cache file. + @param vp Vnode to examine. + @discussion Will not reenter the filesystem. + @return nonzero if a dyld shared cache file, zero otherwise. + */ +int vnode_isdyldsharedcache(vnode_t); + + +/*! + @function vfs_get_notify_attributes + @abstract Determine what attributes are required to send up a notification with vnode_notify(). + @param vap Structure to initialize and activate required attributes on. + @discussion Will not reenter the filesystem. + @return 0 for success, nonzero for error (currently always succeeds). + */ +int vfs_get_notify_attributes(struct vnode_attr *vap); + +/*! + @function vn_getpath_fsenter + @abstract Attempt to get a vnode's path, willing to enter the filesystem. + @discussion Paths to vnodes are not always straightforward: a file with multiple hard-links will have multiple pathnames, + and it is sometimes impossible to determine a vnode's full path. vn_getpath_fsenter() may enter the filesystem + to try to construct a path, so filesystems should be wary of calling it. + @param vp Vnode whose path to get + @param pathbuf Buffer in which to store path. + @param len Destination for length of resulting path string. Result will include NULL-terminator in count--that is, "len" + will be strlen(pathbuf) + 1. + @return 0 for success or an error. + */ +int vn_getpath_fsenter(struct vnode *vp, char *pathbuf, int *len); + +#endif /* KERNEL_PRIVATE */ + +#define VNODE_UPDATE_PARENT 0x01 +#define VNODE_UPDATE_NAME 0x02 +#define VNODE_UPDATE_CACHE 0x04 +#define VNODE_UPDATE_PURGE 0x08 +/*! + @function vnode_update_identity + @abstract Update vnode data associated with the vfs cache. + @discussion The vfs namecache is central to tracking vnode-identifying data and to locating files on the system. vnode_update_identity() + is used to update vnode data associated with the cache. It can set a vnode's parent and/or name (also potentially set by vnode_create()) + or flush cache data. + @param vp The vnode whose information to update. + @param dvp Parent to set on the vnode if VNODE_UPDATE_PARENT is used. + @param name Name to set in the cache for the vnode if VNODE_UPDATE_NAME is used. The buffer passed in can be subsequently freed, as the cache + does its own name storage. String should be NULL-terminated unless length and hash value are specified. + @param name_len Length of name, if known. Passing 0 causes the cache to determine the length itself. + @param name_hashval Hash value of name, if known. Passing 0 causes the cache to hash the name itself. + @param flags VNODE_UPDATE_PARENT: set parent. VNODE_UPDATE_NAME: set name. VNODE_UPDATE_CACHE: flush cache entries for hard links + associated with this file. VNODE_UPDATE_PURGE: flush cache entries for hard links and children of this file. + @return void. + */ +void vnode_update_identity(vnode_t vp, vnode_t dvp, const char *name, int name_len, uint32_t name_hashval, int flags); + +/*! + @function vn_bwrite + @abstract System-provided implementation of "bwrite" vnop. + @discussion This routine is available for filesystems which do not want to implement their own "bwrite" vnop. It just calls + buf_bwrite() without modifying its arguments. + @param ap Standard parameters to a bwrite vnop. + @return Results of buf_bwrite directly. + */ +int vn_bwrite(struct vnop_bwrite_args *ap); + +/*! + @function vnode_authorize + @abstract Authorize a kauth-style action on a vnode. + @discussion Operations on dead vnodes are always allowed (though never do anything). + @param vp Vnode on which to authorize action. + @param dvp Parent of "vp," can be NULL. + @param action Action to authorize, e.g. KAUTH_VNODE_READ_DATA. See bsd/sys/kauth.h. + @param ctx Context for which to authorize actions. + @return EACCESS if permission is denied. 0 if operation allowed. Various errors from lower layers. + */ +int vnode_authorize(vnode_t /*vp*/, vnode_t /*dvp*/, kauth_action_t, vfs_context_t); + +/*! + @function vnode_authattr + @abstract Given a vnode_attr structure, determine what kauth-style actions must be authorized in order to set those attributes. + @discussion vnode_authorize requires kauth-style actions; if we want to set a vnode_attr structure on a vnode, we need to translate + the set of attributes to a set of kauth-style actions. This routine will return errors for certain obviously disallowed, or + incoherent, actions. + @param vp The vnode on which to authorize action. + @param vap Pointer to vnode_attr struct containing desired attributes to set and their values. + @param actionp Destination for set of actions to authorize + @param ctx Context for which to authorize actions. + @return 0 (and a result in "actionp" for success. Otherwise, an error code. + */ +int vnode_authattr(vnode_t, struct vnode_attr *, kauth_action_t *, vfs_context_t); + +/*! + @function vnode_authattr_new + @abstract Initialize and validate file creation parameters with respect to the current context. + @discussion vnode_authattr_new() will fill in unitialized values in the vnode_attr struct with defaults, and will validate the structure + with respect to the current context for file creation. + @param dvp The directory in which creation will occur. + @param vap Pointer to vnode_attr struct containing desired attributes to set and their values. + @param noauth If 1, treat the caller as the superuser, i.e. do not check permissions. + @param ctx Context for which to authorize actions. + @return KAUTH_RESULT_ALLOW for success, an error to indicate invalid or disallowed attributes. + */ +int vnode_authattr_new(vnode_t /*dvp*/, struct vnode_attr *, int /*noauth*/, vfs_context_t); + +/*! + @function vnode_close + @abstract Close a file as opened with vnode_open(). + @discussion vnode_close() drops the refcount (persistent reference) picked up in vnode_open() and calls down to the filesystem with VNOP_CLOSE. It should + be called with both an iocount and a refcount on the vnode and will drop both. + @param vp The vnode to close. + @param flags Flags to close: FWASWRITTEN indicates that the file was written to. + @param ctx Context against which to validate operation. + @return 0 for success or an error from the filesystem. + */ +errno_t vnode_close(vnode_t, int, vfs_context_t); + +/*! + @function vn_getpath + @abstract Construct the path to a vnode. + @discussion Paths to vnodes are not always straightforward: a file with multiple hard-links will have multiple pathnames, + and it is sometimes impossible to determine a vnode's full path. vn_getpath() will not enter the filesystem. + @param vp The vnode whose path to obtain. + @param pathbuf Destination for pathname; should be of size MAXPATHLEN + @param len Destination for length of resulting path string. Result will include NULL-terminator in count--that is, "len" + will be strlen(pathbuf) + 1. + @return 0 for success or an error code. + */ +int vn_getpath(struct vnode *vp, char *pathbuf, int *len); + /* - * VOCALL calls an op given an ops vector. We break it out because BSD's - * vclean changes the ops vector and then wants to call ops with the old - * vector. + * Flags for the vnode_lookup and vnode_open + */ +#define VNODE_LOOKUP_NOFOLLOW 0x01 +#define VNODE_LOOKUP_NOCROSSMOUNT 0x02 +#define VNODE_LOOKUP_DOWHITEOUT 0x04 /* OBSOLETE */ +/*! + @function vnode_lookup + @abstract Convert a path into a vnode. + @discussion This routine is a thin wrapper around xnu-internal lookup routines; if successful, + it returns with an iocount held on the resulting vnode which must be dropped with vnode_put(). + @param path Path to look up. + @param flags VNODE_LOOKUP_NOFOLLOW: do not follow symbolic links. VNODE_LOOKUP_NOCROSSMOUNT: do not cross mount points. + @return Results 0 for success or an error code. */ -#define VOCALL(OPSV,OFF,AP) (( *((OPSV)[(OFF)])) (AP)) +errno_t vnode_lookup(const char *, int, vnode_t *, vfs_context_t); + +/*! + @function vnode_open + @abstract Open a file identified by a path--roughly speaking an in-kernel open(2). + @discussion If vnode_open() succeeds, it returns with both an iocount and a usecount on the returned vnode. These must + be released eventually; the iocount should be released with vnode_put() as soon as any initial operations + on the vnode are over, whereas the usecount should be released via vnode_close(). + @param path Path to look up. + @param fmode e.g. O_NONBLOCK, O_APPEND; see bsd/sys/fcntl.h. + @param cmode Permissions with which to create file if it does not exist. + @param flags Same as vnode_lookup(). + @param vpp Destination for vnode. + @param ctx Context with which to authorize open/creation. + @return 0 for success or an error code. + */ +errno_t vnode_open(const char *, int, int, int, vnode_t *, vfs_context_t); /* - * This call works for vnodes in the kernel. + * exported vnode operations */ -#define VCALL(VP,OFF,AP) VOCALL((VP)->v_op,(OFF),(AP)) -#define VDESC(OP) (& __CONCAT(OP,_desc)) -#define VOFFSET(OP) (VDESC(OP)->vdesc_offset) -#endif /* __APPLE_API_PRIVATE */ +/*! + @function vnode_iterate + @abstract Perform an operation on (almost) all vnodes from a given mountpoint. + @param mp Mount whose vnodes to operate on. + @param flags + VNODE_RELOAD Mark inactive vnodes for recycle. + VNODE_WAIT + VNODE_WRITEABLE Only examine vnodes with writes in progress. + VNODE_WITHID No effect. + VNODE_NOLOCK_INTERNAL No effect. + VNODE_NODEAD No effect. + VNODE_NOSUSPEND No effect. + VNODE_ITERATE_ALL No effect. + VNODE_ITERATE_ACTIVE No effect. + VNODE_ITERATE_INACTIVE No effect. + + @param callout Function to call on each vnode. + @param arg Argument which will be passed to callout along with each vnode. + @return Zero for success, else an error code. Will return 0 immediately if there are no vnodes hooked into the mount. + @discussion Skips vnodes which are dead, in the process of reclaim, suspended, or of type VNON. + */ +int vnode_iterate(struct mount *, int, int (*)(struct vnode *, void *), void *); /* - * Finally, include the default set of vnode operations. + * flags passed into vnode_iterate */ -#include +#define VNODE_RELOAD 0x01 +#define VNODE_WAIT 0x02 +#define VNODE_WRITEABLE 0x04 +#define VNODE_WITHID 0x08 +#define VNODE_NOLOCK_INTERNAL 0x10 +#define VNODE_NODEAD 0x20 +#define VNODE_NOSUSPEND 0x40 +#define VNODE_ITERATE_ALL 0x80 +#define VNODE_ITERATE_ACTIVE 0x100 +#define VNODE_ITERATE_INACTIVE 0x200 +#ifdef BSD_KERNEL_PRIVATE +#define VNODE_ALWAYS 0x400 +#define VNODE_DRAINO 0x800 +#endif /* BSD_KERNEL_PRIVATE */ /* - * vnode manipulation functions. + * return values from callback + */ +#define VNODE_RETURNED 0 /* done with vnode, reference can be dropped */ +#define VNODE_RETURNED_DONE 1 /* done with vnode, reference can be dropped, terminate iteration */ +#define VNODE_CLAIMED 2 /* don't drop reference */ +#define VNODE_CLAIMED_DONE 3 /* don't drop reference, terminate iteration */ + +/*! + @function vn_revoke + @abstract Invalidate all references to a vnode. + @discussion Reclaims the vnode, giving it deadfs vnops (though not halting operations which are already in progress). + Also reclaims all aliased vnodes (important for devices). People holding usecounts on the vnode, e.g. processes + with the file open, will find that all subsequent operations but closing the file fail. + @param vp The vnode to revoke. + @param flags Unused. + @param ctx Context against which to validate operation. + @return 0 always. + */ +int vn_revoke(vnode_t vp, int flags, vfs_context_t); + +/* namecache function prototypes */ +/*! + @function cache_lookup + @abstract Check for a filename in a directory using the VFS name cache. + @discussion cache_lookup() will flush negative cache entries and return 0 if the operation of the cn_nameiop is CREATE or RENAME. + Often used from the filesystem during a lookup vnop. The filesystem will be called to if there is a negative cache entry for a file, + so it can make sense to initially check for negative entries (and possibly lush them). + @param dvp Directory in which lookup is occurring. + @param vpp Destination for vnode pointer. + @param cnp Various data about lookup, e.g. filename and intended operation. + @return ENOENT: the filesystem has previously added a negative entry with cache_enter() to indicate that there is no + file of the given name in "dp." -1: successfully found a cached vnode (vpp is set). 0: No data in the cache, or operation is CRETE/RENAME. + */ +int cache_lookup(vnode_t dvp, vnode_t *vpp, struct componentname *cnp); + +/*! + @function cache_enter + @abstract Add a (name,vnode) entry to the VFS namecache. + @discussion Generally used to add a cache entry after a successful filesystem-level lookup or to add a + negative entry after one which did not find its target. + @param dvp Directory in which file lives. + @param vp File to add to cache. A non-NULL vp is stored for rapid access; a NULL vp indicates + that there is no such file in the directory and speeds future failed lookups. + @param cnp Various data about lookup, e.g. filename and intended operation. + @return void. + */ +void cache_enter(vnode_t dvp, vnode_t vp, struct componentname *cnp); + +/*! + @function cache_purge + @abstract Remove all data relating to a vnode from the namecache. + @discussion Will flush all hardlinks to the vnode as well as all children (should any exist). Logical + to use when cached data about a vnode becomes invalid, for instance in an unlink. + @param vp The vnode to purge. + @return void. + */ +void cache_purge(vnode_t vp); + +/*! + @function cache_purge_negatives + @abstract Remove all negative cache entries which are children of a given vnode. + @discussion Appropriate to use when negative cache information for a directory could have + become invalid, e.g. after file creation. + @param vp The vnode whose negative children to purge. + @return void. + */ +void cache_purge_negatives(vnode_t vp); + + +/* + * Global string-cache routines. You can pass zero for nc_hash + * if you don't know it (add_name() will then compute the hash). + * There are no flags for now but maybe someday. + */ +/*! + @function vfs_addname + @abstract Deprecated + @discussion vnode_update_identity() and vnode_create() make vfs_addname() unnecessary for kexts. */ -struct file; -struct mount; -struct nameidata; -struct ostat; -struct proc; +const char *vfs_addname(const char *name, uint32_t len, uint32_t nc_hash, uint32_t flags); + +/*! + @function vfs_removename + @abstract Deprecated + @discussion vnode_update_identity() and vnode_create() make vfs_addname() unnecessary for kexts. + */ +int vfs_removename(const char *name); + +/*! + @function vcount + @abstract Count total references to a given file, disregarding "kusecount" (event listener, as with O_EVTONLY) references. + @discussion For a regular file, just return (usecount-kusecount); for device files, return the sum over all + vnodes 'v' which reference that device of (usecount(v) - kusecount(v)). Note that this is merely a snapshot and could be + invalid by the time the caller checks the result. + @param vp The vnode whose references to count. + @return Count of references. + */ +int vcount(vnode_t vp); + +/*! + @function vn_path_package_check + @abstract Figure out if a path corresponds to a Mac OS X package. + @discussion Determines if the extension on a path is a known OS X extension type. + @param vp Unused. + @param path Path to check. + @param pathlen Size of path buffer. + @param component Set to index of start of last path component if the path is found to be a package. Set to -1 if + the path is not a known package type. + @return 0 unless some parameter was invalid, in which case EINVAL is returned. Determine package-ness by checking + what *component is set to. + */ +int vn_path_package_check(vnode_t vp, char *path, int pathlen, int *component); + +#ifdef KERNEL_PRIVATE +/*! + @function vn_searchfs_inappropriate_name + @abstract Figure out if the component is inappropriate for a SearchFS query. + @param name component to check + @param len length of component. + @return 0 if no match, 1 if inappropriate. + */ +int vn_searchfs_inappropriate_name(const char *name, int len); +#endif + +/*! + @function vn_rdwr + @abstract Read from or write to a file. + @discussion vn_rdwr() abstracts the details of constructing a uio and picking a vnode operation to allow + simple in-kernel file I/O. + @param rw UIO_READ for a read, UIO_WRITE for a write. + @param vp The vnode on which to perform I/O. + @param base Start of buffer into which to read or from which to write data. + @param len Length of buffer. + @param offset Offset within the file at which to start I/O. + @param segflg What kind of address "base" is. See uio_seg definition in sys/uio.h. UIO_SYSSPACE for kernelspace, UIO_USERSPACE for userspace. + UIO_USERSPACE32 and UIO_USERSPACE64 are in general preferred, but vn_rdwr will make sure that has the correct address sizes. + @param ioflg Defined in vnode.h, e.g. IO_NOAUTH, IO_NOCACHE. + @param cred Credential to pass down to filesystem for authentication. + @param aresid Destination for amount of requested I/O which was not completed, as with uio_resid(). + @param p Process requesting I/O. + @return 0 for success; errors from filesystem, and EIO if did not perform all requested I/O and the "aresid" parameter is NULL. + */ +int vn_rdwr(enum uio_rw, vnode_t, caddr_t, int, off_t, enum uio_seg, int, kauth_cred_t, int *, proc_t); + +/*! + @function vnode_getname + @abstract Get the name of a vnode from the VFS namecache. + @discussion Not all vnodes have names, and vnode names can change (notably, hardlinks). Use this routine at your own risk. + The string is returned with a refcount incremented in the cache; callers must call vnode_putname() to release that reference. + @param vp The vnode whose name to grab. + @return The name, or NULL if unavailable. + */ +const char *vnode_getname(vnode_t vp); + +/*! + @function vnode_putname + @abstract Release a reference on a name from the VFS cache. + @discussion Should be called on a string obtained with vnode_getname(). + @param name String to release. + @return void. + */ +void vnode_putname(const char *name); + +/*! + @function vnode_getparent + @abstract Get an iocount on the parent of a vnode. + @discussion A vnode's parent may change over time or be reclaimed, so vnode_getparent() may return different + results at different times (e.g. a multiple-hardlink file). The parent is returned with an iocount which must + subsequently be dropped with vnode_put(). + @param vp The vnode whose parent to grab. + @return Parent if available, else NULL. + */ +vnode_t vnode_getparent(vnode_t vp); + +#ifdef KERNEL_PRIVATE +/*! + @function vnode_lookup_continue_needed + @abstract Determine whether vnode needs additional processing in VFS before being opened. + @discussion If result is zero, filesystem can open this vnode. If result is nonzero, + additional processing is needed in VFS (e.g. symlink, mountpoint). Nonzero results should + be passed up to VFS. + @param vp Vnode to consider opening (found by filesystem). + @param cnp Componentname as passed to filesystem from VFS. + @result 0 to indicate that a vnode can be opened, or an error that should be passed up to VFS. + */ +int vnode_lookup_continue_needed(vnode_t vp, struct componentname *cnp); +#endif /* KERNEL_PRIVATE */ + +#ifdef BSD_KERNEL_PRIVATE +/* Not in export list so can be private */ struct stat; -struct ucred; -struct uio; -struct vattr; -struct vnode; -struct vop_bwrite_args; - -#ifdef __APPLE_API_EVOLVING -int bdevvp __P((dev_t dev, struct vnode **vpp)); -void cvtstat __P((struct stat *st, struct ostat *ost)); -int getnewvnode __P((enum vtagtype tag, - struct mount *mp, int (**vops)(void *), struct vnode **vpp)); -void insmntque __P((struct vnode *vp, struct mount *mp)); -void vattr_null __P((struct vattr *vap)); -int vcount __P((struct vnode *vp)); -int vflush __P((struct mount *mp, struct vnode *skipvp, int flags)); -int vget __P((struct vnode *vp, int lockflag, struct proc *p)); -void vgone __P((struct vnode *vp)); -int vinvalbuf __P((struct vnode *vp, int save, struct ucred *cred, - struct proc *p, int slpflag, int slptimeo)); -void vprint __P((char *label, struct vnode *vp)); -int vrecycle __P((struct vnode *vp, struct slock *inter_lkp, - struct proc *p)); -int vn_bwrite __P((struct vop_bwrite_args *ap)); -int vn_close __P((struct vnode *vp, - int flags, struct ucred *cred, struct proc *p)); -int vn_lock __P((struct vnode *vp, int flags, struct proc *p)); -int vn_open __P((struct nameidata *ndp, int fmode, int cmode)); -int vn_rdwr __P((enum uio_rw rw, struct vnode *vp, caddr_t base, - int len, off_t offset, enum uio_seg segflg, int ioflg, - struct ucred *cred, int *aresid, struct proc *p)); -int vn_stat __P((struct vnode *vp, struct stat *sb, struct proc *p)); -int vop_noislocked __P((struct vop_islocked_args *)); -int vop_nolock __P((struct vop_lock_args *)); -int vop_nounlock __P((struct vop_unlock_args *)); -int vop_revoke __P((struct vop_revoke_args *)); -struct vnode * - checkalias __P((struct vnode *vp, dev_t nvp_rdev, struct mount *mp)); -void vput __P((struct vnode *vp)); -void vrele __P((struct vnode *vp)); -int vaccess __P((mode_t file_mode, uid_t uid, gid_t gid, - mode_t acc_mode, struct ucred *cred)); -int getvnode __P((struct proc *p, int fd, struct file **fpp)); -#endif __APPLE_API_EVOLVING +int vn_stat(struct vnode *vp, void * sb, kauth_filesec_t *xsec, int isstat64, vfs_context_t ctx); +int vn_stat_noauth(struct vnode *vp, void * sb, kauth_filesec_t *xsec, int isstat64, vfs_context_t ctx); +int vaccess(mode_t file_mode, uid_t uid, gid_t gid, + mode_t acc_mode, kauth_cred_t cred); +int check_mountedon(dev_t dev, enum vtype type, int *errorp); +int vn_getcdhash(struct vnode *vp, off_t offset, unsigned char *cdhash); +void vnode_reclaim(vnode_t); +vfs_context_t vfs_context_kernel(void); /* get from 1st kernel thread */ +int vfs_context_issuser(vfs_context_t); +vnode_t vfs_context_cwd(vfs_context_t); +vnode_t current_rootdir(void); +vnode_t current_workingdir(void); +void *vnode_vfsfsprivate(vnode_t); +struct vfsstatfs *vnode_vfsstatfs(vnode_t); +uint32_t vnode_vfsvisflags(vnode_t); +uint32_t vnode_vfscmdflags(vnode_t); +int vnode_is_openevt(vnode_t); +void vnode_set_openevt(vnode_t); +void vnode_clear_openevt(vnode_t); +int vnode_isstandard(vnode_t); +int vnode_makeimode(int, int); +enum vtype vnode_iftovt(int); +int vnode_vttoif(enum vtype); +int vnode_isshadow(vnode_t); +int vnode_istty(vnode_t vp); +/* + * Indicate that a file has multiple hard links. VFS will always call + * VNOP_LOOKUP on this vnode. Volfs will always ask for it's parent + * object ID (instead of using the v_parent pointer). + */ +vnode_t vnode_parent(vnode_t); +void vnode_setparent(vnode_t, vnode_t); +const char * vnode_name(vnode_t); +void vnode_setname(vnode_t, char *); +int vnode_isnoflush(vnode_t); +void vnode_setnoflush(vnode_t); +void vnode_clearnoflush(vnode_t); +/* XXX temporary until we can arrive at a KPI for NFS, Seatbelt */ +thread_t vfs_context_thread(vfs_context_t); + +#endif /* BSD_KERNEL_PRIVATE */ + +__END_DECLS #endif /* KERNEL */