X-Git-Url: https://git.saurik.com/apple/xnu.git/blobdiff_plain/43866e378188c25dd1e2208016ab3cbeb086ae6c..593a1d5fd87cdf5b46dd5fcb84467b432cea0f91:/osfmk/i386/commpage/commpage.c diff --git a/osfmk/i386/commpage/commpage.c b/osfmk/i386/commpage/commpage.c index 2c41d6662..b2bd5af50 100644 --- a/osfmk/i386/commpage/commpage.c +++ b/osfmk/i386/commpage/commpage.c @@ -1,16 +1,19 @@ /* - * Copyright (c) 2003 Apple Computer, Inc. All rights reserved. + * Copyright (c) 2003-2007 Apple Inc. All rights reserved. * - * @APPLE_LICENSE_HEADER_START@ - * - * Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved. + * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ * * This file contains Original Code and/or Modifications of Original Code * as defined in and that are subject to the Apple Public Source License * Version 2.0 (the 'License'). You may not use this file except in - * compliance with the License. Please obtain a copy of the License at - * http://www.opensource.apple.com/apsl/ and read it before using this - * file. + * compliance with the License. The rights granted to you under the License + * may not be used to create, or enable the creation or redistribution of, + * unlawful or unlicensed copies of an Apple operating system, or to + * circumvent, violate, or enable the circumvention or violation of, any + * terms of an Apple operating system software license agreement. + * + * Please obtain a copy of the License at + * http://www.opensource.apple.com/apsl/ and read it before using this file. * * The Original Code and all software distributed under the License are * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER @@ -20,16 +23,535 @@ * Please see the License for the specific language governing rights and * limitations under the License. * - * @APPLE_LICENSE_HEADER_END@ + * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ */ +/* + * Here's what to do if you want to add a new routine to the comm page: + * + * 1. Add a definition for it's address in osfmk/i386/cpu_capabilities.h, + * being careful to reserve room for future expansion. + * + * 2. Write one or more versions of the routine, each with it's own + * commpage_descriptor. The tricky part is getting the "special", + * "musthave", and "canthave" fields right, so that exactly one + * version of the routine is selected for every machine. + * The source files should be in osfmk/i386/commpage/. + * + * 3. Add a ptr to your new commpage_descriptor(s) in the "routines" + * array in osfmk/i386/commpage/commpage_asm.s. There are two + * arrays, one for the 32-bit and one for the 64-bit commpage. + * + * 4. Write the code in Libc to use the new routine. + */ + +#include +#include +#include +#include +#include +#include +#include #include #include +#include +#include +#include +#include + +#include + +/* the lists of commpage routines are in commpage_asm.s */ +extern commpage_descriptor* commpage_32_routines[]; +extern commpage_descriptor* commpage_64_routines[]; + +/* translated commpage descriptors from commpage_sigs.c */ +extern commpage_descriptor sigdata_descriptor; +extern commpage_descriptor *ba_descriptors[]; + +extern vm_map_t commpage32_map; // the shared submap, set up in vm init +extern vm_map_t commpage64_map; // the shared submap, set up in vm init + +char *commPagePtr32 = NULL; // virtual addr in kernel map of 32-bit commpage +char *commPagePtr64 = NULL; // ...and of 64-bit commpage +int _cpu_capabilities = 0; // define the capability vector + +int noVMX = 0; /* if true, do not set kHasAltivec in ppc _cpu_capabilities */ + +static uintptr_t next; // next available byte in comm page +static int cur_routine; // comm page address of "current" routine +static int matched; // true if we've found a match for "current" routine + +static char *commPagePtr; // virtual addr in kernel map of commpage we are working on +static size_t commPageBaseOffset; // add to 32-bit runtime address to get offset in commpage + +static commpage_time_data *time_data32 = NULL; +static commpage_time_data *time_data64 = NULL; + +/* Allocate the commpage and add to the shared submap created by vm: + * 1. allocate a page in the kernel map (RW) + * 2. wire it down + * 3. make a memory entry out of it + * 4. map that entry into the shared comm region map (R-only) + */ + +static void* +commpage_allocate( + vm_map_t submap, // commpage32_map or commpage_map64 + size_t area_used ) // _COMM_PAGE32_AREA_USED or _COMM_PAGE64_AREA_USED +{ + vm_offset_t kernel_addr = 0; // address of commpage in kernel map + vm_offset_t zero = 0; + vm_size_t size = area_used; // size actually populated + vm_map_entry_t entry; + ipc_port_t handle; + + if (submap == NULL) + panic("commpage submap is null"); + + if (vm_map(kernel_map,&kernel_addr,area_used,0,VM_FLAGS_ANYWHERE,NULL,0,FALSE,VM_PROT_ALL,VM_PROT_ALL,VM_INHERIT_NONE)) + panic("cannot allocate commpage"); + + if (vm_map_wire(kernel_map,kernel_addr,kernel_addr+area_used,VM_PROT_DEFAULT,FALSE)) + panic("cannot wire commpage"); + + /* + * Now that the object is created and wired into the kernel map, mark it so that no delay + * copy-on-write will ever be performed on it as a result of mapping it into user-space. + * If such a delayed copy ever occurred, we could remove the kernel's wired mapping - and + * that would be a real disaster. + * + * JMM - What we really need is a way to create it like this in the first place. + */ + if (!vm_map_lookup_entry( kernel_map, vm_map_trunc_page(kernel_addr), &entry) || entry->is_sub_map) + panic("cannot find commpage entry"); + entry->object.vm_object->copy_strategy = MEMORY_OBJECT_COPY_NONE; + + if (mach_make_memory_entry( kernel_map, // target map + &size, // size + kernel_addr, // offset (address in kernel map) + VM_PROT_ALL, // map it RWX + &handle, // this is the object handle we get + NULL )) // parent_entry (what is this?) + panic("cannot make entry for commpage"); + + if (vm_map_64( submap, // target map (shared submap) + &zero, // address (map into 1st page in submap) + area_used, // size + 0, // mask + VM_FLAGS_FIXED, // flags (it must be 1st page in submap) + handle, // port is the memory entry we just made + 0, // offset (map 1st page in memory entry) + FALSE, // copy + VM_PROT_READ|VM_PROT_EXECUTE, // cur_protection (R-only in user map) + VM_PROT_READ|VM_PROT_EXECUTE, // max_protection + VM_INHERIT_SHARE )) // inheritance + panic("cannot map commpage"); + + ipc_port_release(handle); + + return (void*) kernel_addr; // return address in kernel map +} + +/* Get address (in kernel map) of a commpage field. */ + +static void* +commpage_addr_of( + int addr_at_runtime ) +{ + return (void*) ((uintptr_t)commPagePtr + addr_at_runtime - commPageBaseOffset); +} + +/* Determine number of CPUs on this system. We cannot rely on + * machine_info.max_cpus this early in the boot. + */ +static int +commpage_cpus( void ) +{ + int cpus; + + cpus = ml_get_max_cpus(); // NB: this call can block + + if (cpus == 0) + panic("commpage cpus==0"); + if (cpus > 0xFF) + cpus = 0xFF; + + return cpus; +} + +/* Initialize kernel version of _cpu_capabilities vector (used by KEXTs.) */ + +static void +commpage_init_cpu_capabilities( void ) +{ + int bits; + int cpus; + ml_cpu_info_t cpu_info; + + bits = 0; + ml_cpu_get_info(&cpu_info); + + switch (cpu_info.vector_unit) { + case 8: + bits |= kHasSSE4_2; + /* fall thru */ + case 7: + bits |= kHasSSE4_1; + /* fall thru */ + case 6: + bits |= kHasSupplementalSSE3; + /* fall thru */ + case 5: + bits |= kHasSSE3; + /* fall thru */ + case 4: + bits |= kHasSSE2; + /* fall thru */ + case 3: + bits |= kHasSSE; + /* fall thru */ + case 2: + bits |= kHasMMX; + default: + break; + } + switch (cpu_info.cache_line_size) { + case 128: + bits |= kCache128; + break; + case 64: + bits |= kCache64; + break; + case 32: + bits |= kCache32; + break; + default: + break; + } + cpus = commpage_cpus(); // how many CPUs do we have + + if (cpus == 1) + bits |= kUP; + + bits |= (cpus << kNumCPUsShift); + + bits |= kFastThreadLocalStorage; // we use %gs for TLS + + if (cpu_mode_is64bit()) // k64Bit means processor is 64-bit capable + bits |= k64Bit; + + if (tscFreq <= SLOW_TSC_THRESHOLD) /* is TSC too slow for _commpage_nanotime? */ + bits |= kSlow; + + _cpu_capabilities = bits; // set kernel version for use by drivers etc +} -int _cpu_capabilities = 0; /* define the capability vector */ +int +_get_cpu_capabilities(void) +{ + return _cpu_capabilities; +} -void commpage_populate( void ) { +/* Copy data into commpage. */ - /* no commpage on Intel yet */ +static void +commpage_stuff( + int address, + const void *source, + int length ) +{ + void *dest = commpage_addr_of(address); + + if ((uintptr_t)dest < next) + panic("commpage overlap at address 0x%x, %p < 0x%lx", address, dest, next); + + bcopy(source,dest,length); + + next = ((uintptr_t)dest + length); +} + +static void +commpage_stuff_swap( + int address, + void *source, + int length, + int legacy ) +{ + if ( legacy ) { + void *dest = commpage_addr_of(address); + dest = (void *)((uintptr_t) dest + _COMM_PAGE_SIGS_OFFSET); + switch (length) { + case 2: + OSWriteSwapInt16(dest, 0, *(uint16_t *)source); + break; + case 4: + OSWriteSwapInt32(dest, 0, *(uint32_t *)source); + break; + case 8: + OSWriteSwapInt64(dest, 0, *(uint64_t *)source); + break; + } + } +} + +static void +commpage_stuff2( + int address, + void *source, + int length, + int legacy ) +{ + commpage_stuff_swap(address, source, length, legacy); + commpage_stuff(address, source, length); +} + +/* Copy a routine into comm page if it matches running machine. + */ +static void +commpage_stuff_routine( + commpage_descriptor *rd ) +{ + int must,cant; + + if (rd->commpage_address != cur_routine) { + if ((cur_routine!=0) && (matched==0)) + panic("commpage no match for last, next address %08lx", rd->commpage_address); + cur_routine = rd->commpage_address; + matched = 0; + } + + must = _cpu_capabilities & rd->musthave; + cant = _cpu_capabilities & rd->canthave; + if ((must == rd->musthave) && (cant == 0)) { + if (matched) + panic("commpage multiple matches for address %08lx", rd->commpage_address); + matched = 1; + + commpage_stuff(rd->commpage_address,rd->code_address,rd->code_length); + } +} + +/* Fill in the 32- or 64-bit commpage. Called once for each. + * The 32-bit ("legacy") commpage has a bunch of stuff added to it + * for translated processes, some of which is byte-swapped. + */ + +static void +commpage_populate_one( + vm_map_t submap, // commpage32_map or compage64_map + char ** kernAddressPtr, // &commPagePtr32 or &commPagePtr64 + size_t area_used, // _COMM_PAGE32_AREA_USED or _COMM_PAGE64_AREA_USED + size_t base_offset, // will become commPageBaseOffset + commpage_descriptor** commpage_routines, // list of routine ptrs for this commpage + boolean_t legacy, // true if 32-bit commpage + commpage_time_data** time_data, // &time_data32 or &time_data64 + const char* signature ) // "commpage 32-bit" or "commpage 64-bit" +{ + short c2; + static double two52 = 1048576.0 * 1048576.0 * 4096.0; // 2**52 + static double ten6 = 1000000.0; // 10**6 + commpage_descriptor **rd; + short version = _COMM_PAGE_THIS_VERSION; + int swapcaps; + + next = (uintptr_t) NULL; + cur_routine = 0; + commPagePtr = (char *)commpage_allocate( submap, (vm_size_t) area_used ); + *kernAddressPtr = commPagePtr; // save address either in commPagePtr32 or 64 + commPageBaseOffset = base_offset; + + *time_data = commpage_addr_of( _COMM_PAGE_TIME_DATA_START ); + + /* Stuff in the constants. We move things into the comm page in strictly + * ascending order, so we can check for overlap and panic if so. + */ + commpage_stuff(_COMM_PAGE_SIGNATURE,signature,strlen(signature)); + commpage_stuff2(_COMM_PAGE_VERSION,&version,sizeof(short),legacy); + commpage_stuff(_COMM_PAGE_CPU_CAPABILITIES,&_cpu_capabilities,sizeof(int)); + + /* excuse our magic constants, we cannot include ppc/cpu_capabilities.h */ + /* always set kCache32 and kDcbaAvailable */ + swapcaps = 0x44; + if ( _cpu_capabilities & kUP ) + swapcaps |= (kUP + (1 << kNumCPUsShift)); + else + swapcaps |= 2 << kNumCPUsShift; /* limit #cpus to 2 */ + if ( ! noVMX ) /* if rosetta will be emulating altivec... */ + swapcaps |= 0x101; /* ...then set kHasAltivec and kDataStreamsAvailable too */ + commpage_stuff_swap(_COMM_PAGE_CPU_CAPABILITIES, &swapcaps, sizeof(int), legacy); + c2 = 32; + commpage_stuff_swap(_COMM_PAGE_CACHE_LINESIZE,&c2,2,legacy); + + if (_cpu_capabilities & kCache32) + c2 = 32; + else if (_cpu_capabilities & kCache64) + c2 = 64; + else if (_cpu_capabilities & kCache128) + c2 = 128; + commpage_stuff(_COMM_PAGE_CACHE_LINESIZE,&c2,2); + + if ( legacy ) { + commpage_stuff2(_COMM_PAGE_2_TO_52,&two52,8,legacy); + commpage_stuff2(_COMM_PAGE_10_TO_6,&ten6,8,legacy); + } + + for( rd = commpage_routines; *rd != NULL ; rd++ ) + commpage_stuff_routine(*rd); + + if (!matched) + panic("commpage no match on last routine"); + + if (next > (uintptr_t)_COMM_PAGE_END) + panic("commpage overflow: next = 0x%08lx, commPagePtr = 0x%08lx", next, (uintptr_t)commPagePtr); + + if ( legacy ) { + next = (uintptr_t) NULL; + for( rd = ba_descriptors; *rd != NULL ; rd++ ) + commpage_stuff_routine(*rd); + + next = (uintptr_t) NULL; + commpage_stuff_routine(&sigdata_descriptor); + } +} + + +/* Fill in commpages: called once, during kernel initialization, from the + * startup thread before user-mode code is running. + * + * See the top of this file for a list of what you have to do to add + * a new routine to the commpage. + */ + +void +commpage_populate( void ) +{ + commpage_init_cpu_capabilities(); + + commpage_populate_one( commpage32_map, + &commPagePtr32, + _COMM_PAGE32_AREA_USED, + _COMM_PAGE32_BASE_ADDRESS, + commpage_32_routines, + TRUE, /* legacy (32-bit) commpage */ + &time_data32, + "commpage 32-bit"); + pmap_commpage32_init((vm_offset_t) commPagePtr32, _COMM_PAGE32_BASE_ADDRESS, + _COMM_PAGE32_AREA_USED/INTEL_PGBYTES); + + time_data64 = time_data32; /* if no 64-bit commpage, point to 32-bit */ + + if (_cpu_capabilities & k64Bit) { + commpage_populate_one( commpage64_map, + &commPagePtr64, + _COMM_PAGE64_AREA_USED, + _COMM_PAGE32_START_ADDRESS, /* because kernel is built 32-bit */ + commpage_64_routines, + FALSE, /* not a legacy commpage */ + &time_data64, + "commpage 64-bit"); + pmap_commpage64_init((vm_offset_t) commPagePtr64, _COMM_PAGE64_BASE_ADDRESS, + _COMM_PAGE64_AREA_USED/INTEL_PGBYTES); + } + + rtc_nanotime_init_commpage(); +} + + +/* Update commpage nanotime information. Note that we interleave + * setting the 32- and 64-bit commpages, in order to keep nanotime more + * nearly in sync between the two environments. + * + * This routine must be serialized by some external means, ie a lock. + */ + +void +commpage_set_nanotime( + uint64_t tsc_base, + uint64_t ns_base, + uint32_t scale, + uint32_t shift ) +{ + commpage_time_data *p32 = time_data32; + commpage_time_data *p64 = time_data64; + static uint32_t generation = 0; + uint32_t next_gen; + + if (p32 == NULL) /* have commpages been allocated yet? */ + return; + + if ( generation != p32->nt_generation ) + panic("nanotime trouble 1"); /* possibly not serialized */ + if ( ns_base < p32->nt_ns_base ) + panic("nanotime trouble 2"); + if ((shift != 32) && ((_cpu_capabilities & kSlow)==0) ) + panic("nanotime trouble 3"); + + next_gen = ++generation; + if (next_gen == 0) + next_gen = ++generation; + + p32->nt_generation = 0; /* mark invalid, so commpage won't try to use it */ + p64->nt_generation = 0; + + p32->nt_tsc_base = tsc_base; + p64->nt_tsc_base = tsc_base; + + p32->nt_ns_base = ns_base; + p64->nt_ns_base = ns_base; + + p32->nt_scale = scale; + p64->nt_scale = scale; + + p32->nt_shift = shift; + p64->nt_shift = shift; + + p32->nt_generation = next_gen; /* mark data as valid */ + p64->nt_generation = next_gen; +} + + +/* Disable commpage gettimeofday(), forcing commpage to call through to the kernel. */ + +void +commpage_disable_timestamp( void ) +{ + time_data32->gtod_generation = 0; + time_data64->gtod_generation = 0; +} + + +/* Update commpage gettimeofday() information. As with nanotime(), we interleave + * updates to the 32- and 64-bit commpage, in order to keep time more nearly in sync + * between the two environments. + * + * This routine must be serializeed by some external means, ie a lock. + */ + + void + commpage_set_timestamp( + uint64_t abstime, + uint64_t secs ) +{ + commpage_time_data *p32 = time_data32; + commpage_time_data *p64 = time_data64; + static uint32_t generation = 0; + uint32_t next_gen; + + next_gen = ++generation; + if (next_gen == 0) + next_gen = ++generation; + + p32->gtod_generation = 0; /* mark invalid, so commpage won't try to use it */ + p64->gtod_generation = 0; + + p32->gtod_ns_base = abstime; + p64->gtod_ns_base = abstime; + + p32->gtod_sec_base = secs; + p64->gtod_sec_base = secs; + + p32->gtod_generation = next_gen; /* mark data as valid */ + p64->gtod_generation = next_gen; }