{
OSDeclareDefaultStructors(IODMACommand);
+friend class IODMAEventSource;
+
public:
/*!
static bool OutputBig64(IODMACommand *target,
Segment64 seg, void *segs, UInt32 ind);
-/*! @defined kIODMACommandOutputLittle64
- @abstract Output little-endian Segment64 output segment function.
+/*! @defined kIODMACommandOutputBig64
+ @abstract Output big-endian Segment64 output segment function.
*/
#define kIODMACommandOutputBig64 (IODMACommand::OutputBig64)
static bool OutputLittle64(IODMACommand *target,
Segment64 seg, void *segs, UInt32 ind);
-/*! @defined kIODMACommandOutputBig64
- @abstract Output big-endian Segment64 output segment function.
+/*! @defined kIODMACommandOutputLittle64
+ @abstract Output little-endian Segment64 output segment function.
*/
#define kIODMACommandOutputLittle64 (IODMACommand::OutputLittle64)
/*! @function setMemoryDescriptor
@abstract Sets and resets the DMACommand's current memory descriptor
- @discussion The DMA command will configure itself based on the information that it finds in the memory descriptor. It looks for things like the direction of the memory descriptor and whether the current memory descriptor is already mapped into some IOMMU. As a programmer convenience it can also prepare the memory descriptor immediately. See prepare(). Note the IODMACommand is designed to used multiple times with a succession of memory descriptors, making the pooling of commands possible. It is an error though to attempt to reset a currently prepared() DMA command. Warning: This routine may block so never try to autoprepare an IODMACommand while in a gated context, i.e. one of the WorkLoops action call outs.
+ @discussion The DMA command will configure itself based on the information that it finds in the memory descriptor. It looks for things like the direction of the memory descriptor and whether the current memory descriptor is already mapped into some IOMMU. As a programmer convenience it can also prepare the DMA command immediately. See prepare(). Note the IODMACommand is designed to used multiple times with a succession of memory descriptors, making the pooling of commands possible. It is an error though to attempt to reset a currently prepared() DMA command. Warning: This routine may block so never try to autoprepare an IODMACommand while in a gated context, i.e. one of the WorkLoops action call outs.
@param mem A pointer to the current I/Os memory descriptor.
@param autoPrepare An optional boolean variable that will call the prepare() function automatically after the memory descriptor is processed. Defaults to true.
@result Returns kIOReturnSuccess, kIOReturnBusy if currently prepared, kIOReturnNoSpace if the length(mem) >= Maximum Transfer Size or the error codes returned by prepare() (qv).
void *segments,
UInt32 *numSegments);
+private:
+ virtual UInt64 transfer( IOOptionBits transferOp, UInt64 offset, void * buffer, UInt64 length );
+
+public:
+
+/*! @function writeBytes
+ @abstract Copy data to the IODMACommand's buffer from the specified buffer.
+ @discussion This method copies data to the IODMACommand's memory at the given offset, from the caller's buffer. The IODMACommand must be prepared, and the offset is relative to the prepared offset.
+ @param offset A byte offset into the IODMACommand's memory, relative to the prepared offset.
+ @param bytes The caller supplied buffer to copy the data from.
+ @param length The length of the data to copy.
+ @result The number of bytes copied, zero will be returned if the specified offset is beyond the prepared length of the IODMACommand. */
+
+ UInt64 writeBytes(UInt64 offset, const void *bytes, UInt64 length);
+
+/*! @function readBytes
+ @abstract Copy data from the IODMACommand's buffer to the specified buffer.
+ @discussion This method copies data from the IODMACommand's memory at the given offset, to the caller's buffer. The IODMACommand must be prepared, and the offset is relative to the prepared offset.
+ @param offset A byte offset into the IODMACommand's memory, relative to the prepared offset.
+ @param bytes The caller supplied buffer to copy the data to.
+ @param length The length of the data to copy.
+ @result The number of bytes copied, zero will be returned if the specified offset is beyond the prepared length of the IODMACommand. */
+
+ UInt64 readBytes(UInt64 offset, void *bytes, UInt64 length);
+
/*! @function gen32IOVMSegments
@abstract Helper function for a type checked call to genIOVMSegments(qv), for use with an IODMACommand set up with the output function kIODMACommandOutputHost32, kIODMACommandOutputBig32, or kIODMACommandOutputLittle32. If the output function of the IODMACommand is not a 32 bit function, results will be incorrect.
*/
UInt32 *numSegments)
{ return genIOVMSegments(offset, segments, numSegments); };
+ IOReturn
+ genIOVMSegments(SegmentFunction segmentFunction,
+ UInt64 *offsetP,
+ void *segmentsP,
+ UInt32 *numSegmentsP);
+
virtual void free();
private:
-
typedef IOReturn (*InternalSegmentFunction)(
void *reference,
IODMACommand *target,
void *segments,
UInt32 segmentIndex);
- IOReturn genIOVMSegments(InternalSegmentFunction outSegFunc,
+ IOReturn genIOVMSegments(uint32_t op,
+ InternalSegmentFunction outSegFunc,
void *reference,
UInt64 *offsetP,
void *segmentsP,
static IOReturn clientOutputSegment(
void *reference, IODMACommand *target,
Segment64 segment, void *vSegList, UInt32 outSegIndex);
-
+
static IOReturn segmentOp(
void *reference,
IODMACommand *target,
Segment64 segment,
void *segments,
UInt32 segmentIndex);
- IOReturn IODMACommand::walkAll(UInt8 op);
+ IOReturn walkAll(UInt8 op);
+
+public:
+
+/*! @function prepareWithSpecification
+ @abstract Prepare the memory for an I/O transfer with a new specification.
+ @discussion Allocate the mapping resources neccessary for this transfer, specifying a sub range of the IOMemoryDescriptor that will be the target of the I/O. The complete() method frees these resources. Data may be copied to buffers for kIODirectionOut memory descriptors, depending on hardware mapping resource availabilty or alignment restrictions. It should be noted that the this function may block and should only be called on the clients context, i.e never call this routine while gated; also the call itself is not thread safe though this should be an issue as each IODMACommand is independant.
+ @param outSegFunc SegmentFunction to call to output one physical segment. A set of nine commonly required segment functions are provided.
+ @param numAddressBits Number of bits that the hardware uses on its internal address bus. Typically 32 but may be more on modern hardware. A 0 implies no-restriction other than that implied by the output segment function.
+ @param maxSegmentSize Maximum allowable size for one segment. Defaults to 0 which means any size.
+ @param mappingOptions is the type of mapping that is required to translate an IOMemoryDescriptor into the desired number of bits. For instance if your hardware only supports 32 bits but must run on machines with > 4G of RAM some mapping will be required. Number of bits will be specified in numAddressBits, see below.This parameter can take 3 values:- kNonCoherent - used for non-coherent hardware transfers, Mapped - Validate that all I/O bus generated addresses are within the number of addressing bits specified, Bypassed indicates that bypassed addressing is required, this is used when the hardware transferes are into coherent memory but no mapping is required. See also prepare() for failure cases.
+ @param maxTransferSize Maximum size of an entire transfer. Defaults to 0 indicating no maximum.
+ @param alignment Alignment restriction, in bytes, on I/O bus addresses. Defaults to single byte alignment.
+ @param mapper For mapping types kMapped & kBypassed mapper is used to define the hardware that will perform the mapping, defaults to the system mapper.
+ @param offset defines the starting offset in the memory descriptor the DMA command will operate on. genIOVMSegments will produce its results based on the offset and length passed to the prepare method.
+ @param length defines the ending position in the memory descriptor the DMA command will operate on. genIOVMSegments will produce its results based on the offset and length passed to the prepare method.
+ @param flushCache Flush the caches for the memory descriptor and make certain that the memory cycles are complete. Defaults to true for kNonCoherent and is ignored by the other types.
+ @param synchronize Copy any buffered data back from the target IOMemoryDescriptor. Defaults to true, if synchronize() is being used to explicitly copy data, passing false may avoid an unneeded copy.
+ @result An IOReturn code. Can fail if the mapping type is not recognised, if one of the 3 mandatory parameters are set to 0, if a 32 bit output function is selected when more than 32 bits of address is required or, if kBypassed is requested on a machine that doesn't support bypassing.
+*/
+
+ virtual IOReturn prepareWithSpecification(SegmentFunction outSegFunc,
+ UInt8 numAddressBits,
+ UInt64 maxSegmentSize,
+ MappingOptions mappingOptions = kMapped,
+ UInt64 maxTransferSize = 0,
+ UInt32 alignment = 1,
+ IOMapper *mapper = 0,
+ UInt64 offset = 0,
+ UInt64 length = 0,
+ bool flushCache = true,
+ bool synchronize = true);
+
+ static IOReturn transferSegment(
+ void *reference,
+ IODMACommand *target,
+ Segment64 segment,
+ void *segments,
+ UInt32 segmentIndex);
+
+/*! @function getPreparedOffsetAndLength
+ @abstract Returns the offset and length into the target IOMemoryDescriptor of a prepared IODDMACommand.
+ @discussion If successfully prepared, returns the offset and length into the IOMemoryDescriptor. Will fail for an unprepared IODMACommand.
+ @param offset returns the starting offset in the memory descriptor the DMA command was prepared with. Pass NULL for don't care.
+ @param length returns the length in the memory descriptor the DMA command was prepared with. Pass NULL for don't care.
+ @result An IOReturn code. kIOReturnNotReady if the IODMACommand is not prepared. */
+
+ virtual IOReturn getPreparedOffsetAndLength(UInt64 * offset, UInt64 * length);
+ UInt8 getNumAddressBits(void);
+ UInt32 getAlignment(void);
+
private:
- OSMetaClassDeclareReservedUnused(IODMACommand, 0);
- OSMetaClassDeclareReservedUnused(IODMACommand, 1);
- OSMetaClassDeclareReservedUnused(IODMACommand, 2);
+ OSMetaClassDeclareReservedUsed(IODMACommand, 0);
+ OSMetaClassDeclareReservedUsed(IODMACommand, 1);
+ OSMetaClassDeclareReservedUsed(IODMACommand, 2);
OSMetaClassDeclareReservedUnused(IODMACommand, 3);
OSMetaClassDeclareReservedUnused(IODMACommand, 4);
OSMetaClassDeclareReservedUnused(IODMACommand, 5);
/*! @var reserved
Reserved for future use. (Internal use only) */
- struct ExpansionData * reserved;
+ struct IODMACommandInternal * reserved;
};
IOReturn IODMACommand::
projects / apple / xnu.git / blobdiff