+.\"
+.\" Copyright (c) 2008-2015 Apple Inc. All rights reserved.
+.\"
+.\" @APPLE_LICENSE_HEADER_START@
+.\"
+.\" This file contains Original Code and/or Modifications of Original Code
+.\" as defined in and that are subject to the Apple Public Source License
+.\" Version 2.0 (the 'License'). You may not use this file except in
+.\" compliance with the License. Please obtain a copy of the License at
+.\" http://www.opensource.apple.com/apsl/ and read it before using this
+.\" file.
+.\"
+.\" The Original Code and all software distributed under the License are
+.\" distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+.\" EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
+.\" INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
+.\" FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+.\" Please see the License for the specific language governing rights and
+.\" limitations under the License.
+.\"
+.\" @APPLE_LICENSE_HEADER_END@
+.\"
+.\"
.\" Copyright (c) 2000 Jonathan Lemon
.\" All rights reserved.
.\"
.\"
.\" $FreeBSD: src/lib/libc/sys/kqueue.2,v 1.32 2002/12/19 09:40:25 ru Exp $
.\"
-.Dd April 14, 2000
+.Dd October 21, 2008
.Dt KQUEUE 2
.Os
.Sh NAME
.Nm kqueue ,
-.Nm kevent
+.Nm kevent ,
+and
+.Nm kevent64
.Nd kernel event notification mechanism
.Sh LIBRARY
.Lb libc
.Fn kqueue "void"
.Ft int
.Fn kevent "int kq" "const struct kevent *changelist" "int nchanges" "struct kevent *eventlist" "int nevents" "const struct timespec *timeout"
+.Ft int
+.Fn kevent64 "int kq" "const struct kevent64_s *changelist" "int nchanges" "struct kevent64_s *eventlist" "int nevents" "unsigned int flags" "const struct timespec *timeout"
.Fn EV_SET "&kev" ident filter flags fflags data udata
+.Fn EV_SET64 "&kev" ident filter flags fflags data udata "ext[0]" "ext[1]"
.Sh DESCRIPTION
The
.Fn kqueue
system call
-provides a generic method of notifying the user when an kernel
+provides a generic method of notifying the user when a kernel
event (kevent) happens or a condition holds, based on the results
of small pieces of kernel code termed filters.
A kevent is identified by an (ident, filter) pair and specifies
the interesting conditions to be notified about for that pair.
-An (ident, filter) pair can only appear once is a given kqueue.
+An (ident, filter) pair can only appear once in a given kqueue.
Subsequent attempts to register the same pair for a given kqueue
will result in the replacement of the conditions being watched,
not an addition.
.Pp
The
.Fn kevent
-system call
-is used to register events with the queue, and return any pending
+and
+.Fn kevent64
+system calls
+are used to register events with the queue, and return any pending
events to the user.
The
.Fa changelist
argument
is a pointer to an array of
.Va kevent
+or
+.Va kevent64_s
structures, as defined in
.Aq Pa sys/event.h .
All changes contained in the
The
.Fa eventlist
argument
-is a pointer to an array of kevent structures.
+is a pointer to an array of
+.Va kevent
+or
+.Va kevent64_s
+structures.
The
.Fa nevents
argument
is a non-NULL pointer, it specifies a maximum interval to wait
for an event, which will be interpreted as a struct timespec. If
.Fa timeout
-is a NULL pointer,
+is a NULL pointer, both
.Fn kevent
-waits indefinitely. To effect a poll, the
+and
+.Fn kevent64
+wait indefinitely. To effect a poll, the
.Fa timeout
argument should be non-NULL, pointing to a zero-valued
.Va timespec
The
.Fn EV_SET
macro is provided for ease of initializing a
-kevent structure.
+.Va kevent
+structure. Similarly,
+.Fn EV_SET64
+initializes a
+.Va kevent64_s
+structure.
.Pp
The
.Va kevent
-structure is defined as:
+and
+.Va kevent64_s
+structures are defined as:
.Bd -literal
struct kevent {
- uintptr_t ident; /* identifier for this event */
- short filter; /* filter for event */
- u_short flags; /* action flags for kqueue */
- u_int fflags; /* filter flag value */
- intptr_t data; /* filter data value */
- void *udata; /* opaque user data identifier */
+ uintptr_t ident; /* identifier for this event */
+ int16_t filter; /* filter for event */
+ uint16_t flags; /* general flags */
+ uint32_t fflags; /* filter-specific flags */
+ intptr_t data; /* filter-specific data */
+ void *udata; /* opaque user data identifier */
+};
+
+
+struct kevent64_s {
+ uint64_t ident; /* identifier for this event */
+ int16_t filter; /* filter for event */
+ uint16_t flags; /* general flags */
+ uint32_t fflags; /* filter-specific flags */
+ int64_t data; /* filter-specific data */
+ uint64_t udata; /* opaque user data identifier */
+ uint64_t ext[2]; /* filter-specific extensions */
};
.Ed
.Pp
+----
+.Pp
The fields of
.Fa struct kevent
+and
+.Fa struct kevent64_s
are:
.Bl -tag -width XXXfilter
.It ident
Opaque user-defined value passed through the kernel unchanged.
.El
.Pp
+In addition,
+.Fa struct kevent64_s
+contains:
+.Bl -tag -width XXXfilter
+.It ext[2]
+This field stores extensions for the event's filter. What type of extension depends on
+what type of filter is being used.
+.El
+.Pp
+----
+.Pp
The
.Va flags
field can contain the following values:
.It EV_ENABLE
Permit
.Fn kevent
+and
+.Fn kevent64
to return the event if it is triggered.
.It EV_DISABLE
Disable the event so
.Fn kevent
+and
+.Fn kevent64
will not return it. The filter itself is not disabled.
.It EV_DELETE
Removes the event from the kqueue. Events which are attached to
.It EV_RECEIPT
This flag is useful for making bulk changes to a kqueue without draining any
pending events. When passed as input, it forces EV_ERROR to always be returned.
-When a filter is successfully added. The
+When a filter is successfully added, the
.Va data
field will be zero.
.It EV_ONESHOT
set this flag internally.
.It EV_EOF
Filters may set this flag to indicate filter-specific EOF condition.
+.It EV_OOBAND
+Read filter on socket may set this flag to indicate the presence of out of
+band data on the descriptor.
.It EV_ERROR
See
.Sx RETURN VALUES
below.
.El
.Pp
+----
+.Pp
The predefined system filters are listed below.
Arguments may be passed to and from the filter via the
.Va fflags
and
.Va data
-fields in the kevent structure.
-.Bl -tag -width EVFILT_SIGNAL
+fields in the
+.Va kevent
+or
+.Va kevent64_s
+structure.
+.Bl -tag -width EVFILT_MACHPORT
.It EVFILT_READ
Takes a file descriptor as the identifier, and returns whenever
there is data available to read.
.Va data
contains the number of bytes of protocol data available to read.
.Pp
+The presence of EV_OOBAND in
+.Va flags ,
+indicates the presence of out of band data on the socket
+.Va data
+equal to the potential number of OOB bytes availble to read.
+.Pp
If the read direction of the socket has shutdown, then the filter
also sets EV_EOF in
.Va flags ,
and returns when the process performs one or more of the requested events.
If a process can normally see another process, it can attach an event to it.
The events to monitor are:
-.Bl -tag -width
+.Bl -tag -width NOTE_SIGNAL
.It NOTE_EXIT
The process has exited.
+.It NOTE_EXITSTATUS
+The process has exited and its exit status is in filter specific data. Valid only on child processes and to be used along with NOTE_EXIT.
.It NOTE_FORK
The process created a child process via
.Xr fork 2
.It NOTE_REAP
The process was reaped by the parent via
.Xr wait 2
-or similar call.
+or similar call. Deprecated, use NOTE_EXIT.
.El
.Pp
On return,
contains the events which triggered the filter.
.It EVFILT_SIGNAL
Takes the signal number to monitor as the identifier and returns
-when the given signal is delivered to the process.
+when the given signal is generated for the process.
This coexists with the
.Fn signal
and
.Fn sigaction
-facilities, and has a lower precedence. The filter will record
+facilities, and has a lower precedence. Only signals sent to the process,
+not to a particular thread, will trigger the filter. The filter will record
all attempts to deliver a signal to a process, even if the signal has
-been marked as SIG_IGN. Event notification happens after normal
+been marked as SIG_IGN. Event notification happens before normal
signal delivery processing.
.Va data
-returns the number of times the signal has occurred since the last call to
+returns the number of times the signal has been generated since the last call to
.Fn kevent .
This filter automatically sets the EV_CLEAR flag internally.
+.It EVFILT_MACHPORT
+Takes the name of a mach port, or port set, in
+.Va ident
+and waits until a message is received on the port or port set. When a message
+is recieved, the size of the message is returned in
+.Va data
+and if
+.Va fflags
+is set to MACH_RCV_MSG, a pointer to the message is returned in ext[0].
.It EVFILT_TIMER
-This filter is currently unsupported.
-.\"Establishes an arbitrary timer identified by
-.\".Va ident .
-.\"When adding a timer,
-.\".Va data
-.\"specifies the timeout period in milliseconds.
-.\"The timer will be periodic unless EV_ONESHOT is specified.
-.\"On return,
-.\".Va data
-.\"contains the number of times the timeout has expired since the last call to
-.\".Fn kevent .
-.\"This filter automatically sets the EV_CLEAR flag internally.
+Establishes an interval timer with the data
+timer identified by
+.Va ident .
+When adding a timer,
+.Va data
+specifies the timeout period and
+.Va fflags
+can be set to one of the following:
+.Bl -tag -width NOTE_ABSOLUTE
+.It NOTE_SECONDS
+data is in seconds
+.It NOTE_USECONDS
+data is in microseconds
+.It NOTE_NSECONDS
+data is in nanoseconds
+.It NOTE_ABSOLUTE
+data is an absolute timeout
+.It NOTE_CRITICAL
+system makes a best effort to fire this timer as scheduled.
+.It NOTE_BACKGROUND
+system has extra leeway to coalesce this timer.
+.It NOTE_LEEWAY
+ext[1] holds user-supplied slop in deadline for timer coalescing.
+.El
+.Pp
+If fflags is not set, the default is milliseconds. The timer will be periodic unless EV_ONESHOT is specified.
+On return,
+.Va data
+contains the number of times the timeout has expired since the last call to
+.Fn kevent
+or
+.Fn kevent64 .
+This filter automatically sets the EV_CLEAR flag internally.
.El
+.Pp
+----
+.Pp
+In the
+.Va ext[2]
+field of the
+.Va kevent64_s
+struture,
+.Va ext[0]
+is only used with the EVFILT_MACHPORT filter.
+With other filters,
+.Va ext[0]
+is passed through
+.Fn kevent64
+much like
+.Va udata .
+.Va ext[1]
+can always be used like
+.Va udata .
+For the use of ext[0], see the EVFILT_MACHPORT filter above.
.Sh RETURN VALUES
The
.Fn kqueue
.Pp
The
.Fn kevent
-system call
-returns the number of events placed in the
+and
+.Fn kevent64
+system calls
+return the number of events placed in the
.Fa eventlist ,
up to the value given by
.Fa nevents .
will be set to indicate the error condition.
If the time limit expires, then
.Fn kevent
-returns 0.
+and
+.Fn kevent64
+return 0.
.Sh ERRORS
The
.Fn kqueue
.Pp
The
.Fn kevent
-system call fails if:
+and
+.Fn kevent64
+system calls fail if:
.Bl -tag -width Er
.It Bq Er EACCES
The process does not have permission to register a filter.
.It Bq Er EFAULT
There was an error reading or writing the
.Va kevent
+or
+.Va kevent64_s
structure.
.It Bq Er EBADF
The specified descriptor is invalid.
projects / apple / xnu.git / blobdiff