/*
* Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
*
- * @APPLE_LICENSE_HEADER_START@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
*
- * The contents of this file constitute Original Code as defined in and
- * are subject to the Apple Public Source License Version 1.1 (the
- * "License"). You may not use this file except in compliance with the
- * License. Please obtain a copy of the License at
- * http://www.apple.com/publicsource and read it before using this file.
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. The rights granted to you under the License
+ * may not be used to create, or enable the creation or redistribution of,
+ * unlawful or unlicensed copies of an Apple operating system, or to
+ * circumvent, violate, or enable the circumvention or violation of, any
+ * terms of an Apple operating system software license agreement.
*
- * This Original Code and all software distributed under the License are
- * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this file.
+ *
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
* INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the
- * License for the specific language governing rights and limitations
- * under the License.
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
+ * limitations under the License.
*
- * @APPLE_LICENSE_HEADER_END@
+ * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
*/
/*
* @OSF_COPYRIGHT@
*/
#include <platforms.h>
-#include <cpus.h>
-#include <mach_kdb.h>
#include <i386/asm.h>
#include <i386/proc_reg.h>
+#include <i386/postcode.h>
#include <assym.s>
-#if NCPUS > 1
-
#define CX(addr,reg) addr(,reg,4)
-#else
-
-#define CPU_NUMBER(reg)
-#define CX(addr,reg) addr
-
-#endif /* NCPUS > 1 */
-
-#include <i386/AT386/mp/mp.h>
+#include <i386/acpi.h>
+#include <i386/cpuid.h>
/*
- * GAS won't handle an intersegment jump with a relocatable offset.
+ * Interrupt and bootup stack for initial processor.
*/
-#define LJMP(segment,address) \
- .byte 0xea ;\
- .long address ;\
- .word segment
+/* in the __HIB section since the hibernate restore code uses this stack. */
+ .section __HIB, __data
+ .align 12
+ .globl EXT(low_intstack)
+EXT(low_intstack):
+ .globl EXT(gIOHibernateRestoreStack)
+EXT(gIOHibernateRestoreStack):
-#define KVTOPHYS (-KERNELBASE)
-#define KVTOLINEAR LINEAR_KERNELBASE
+ .space INTSTACK_SIZE
+ .globl EXT(low_eintstack)
+EXT(low_eintstack:)
+ .globl EXT(gIOHibernateRestoreStackEnd)
+EXT(gIOHibernateRestoreStackEnd):
-#define PA(addr) (addr)+KVTOPHYS
-#define VA(addr) (addr)-KVTOPHYS
-
- .data
- .align 2
- .globl EXT(_kick_buffer_)
-EXT(_kick_buffer_):
- .long 1
- .long 3
- .set .,.+16836
-/*
- * Interrupt and bootup stack for initial processor.
- */
- .align ALIGN
- .globl EXT(intstack)
-EXT(intstack):
- .set ., .+INTSTACK_SIZE
- .globl EXT(eintstack)
-EXT(eintstack:)
-
-#if NCPUS == 1
- .globl EXT(int_stack_high) /* all interrupt stacks */
-EXT(int_stack_high): /* must lie below this */
- .long EXT(eintstack) /* address */
-
- .globl EXT(int_stack_top) /* top of interrupt stack */
-EXT(int_stack_top):
- .long EXT(eintstack)
-#endif
-
-#if MACH_KDB
/*
- * Kernel debugger stack for each processor.
+ * Pointers to GDT and IDT. These contain linear addresses.
*/
.align ALIGN
- .globl EXT(db_stack_store)
-EXT(db_stack_store):
- .set ., .+(INTSTACK_SIZE*NCPUS)
+ .globl EXT(gdtptr)
+ /* align below properly */
+ .word 0
+LEXT(gdtptr)
+ .word Times(8,GDTSZ)-1
+ .long EXT(master_gdt)
-/*
- * Stack for last-ditch debugger task for each processor.
- */
- .align ALIGN
- .globl EXT(db_task_stack_store)
-EXT(db_task_stack_store):
- .set ., .+(INTSTACK_SIZE*NCPUS)
-#endif /* MACH_KDB */
+ /* back to the regular __DATA section. */
+
+ .section __DATA, __data
/*
- * per-processor kernel debugger stacks
+ * Stack for last-gasp double-fault handler.
*/
- .align ALIGN
- .globl EXT(kgdb_stack_store)
-EXT(kgdb_stack_store):
- .set ., .+(INTSTACK_SIZE*NCPUS)
+ .align 12
+ .globl EXT(df_task_stack)
+EXT(df_task_stack):
+ .space INTSTACK_SIZE
+ .globl EXT(df_task_stack_end)
+EXT(df_task_stack_end):
/*
- * Pointers to GDT and IDT. These contain linear addresses.
+ * Stack for machine-check handler.
*/
- .align ALIGN
- .globl EXT(gdtptr)
-LEXT(gdtptr)
- .word Times(8,GDTSZ)-1
- .long EXT(gdt)+KVTOLINEAR
-
- .align ALIGN
- .globl EXT(idtptr)
-LEXT(idtptr)
- .word Times(8,IDTSZ)-1
- .long EXT(idt)+KVTOLINEAR
-
-#if NCPUS > 1
- .data
- /*
- * start_lock is very special. We initialize the
- * lock at allocation time rather than at run-time.
- * Although start_lock should be an instance of a
- * hw_lock, we hand-code all manipulation of the lock
- * because the hw_lock code may require function calls;
- * and we'd rather not introduce another dependency on
- * a working stack at this point.
- */
- .globl EXT(start_lock)
-EXT(start_lock):
- .long 0 /* synchronizes processor startup */
-
- .globl EXT(master_is_up)
-EXT(master_is_up):
- .long 0 /* 1 when OK for other processors */
- /* to start */
- .globl EXT(mp_boot_pde)
-EXT(mp_boot_pde):
- .long 0
-#endif /* NCPUS > 1 */
+ .align 12
+ .globl EXT(mc_task_stack)
+EXT(mc_task_stack):
+ .space INTSTACK_SIZE
+ .globl EXT(mc_task_stack_end)
+EXT(mc_task_stack_end):
/*
- * All CPUs start here.
+ * BSP CPU start here.
+ * eax points to kernbootstruct
*
* Environment:
* protected mode, no paging, flat 32-bit address space.
*/
.text
.align ALIGN
- .globl EXT(pstart)
.globl EXT(_start)
LEXT(_start)
-LEXT(pstart)
- mov $0,%ax /* fs must be zeroed; */
- mov %ax,%fs /* some bootstrappers don`t do this */
- mov %ax,%gs
-
-#if NCPUS > 1
- jmp 1f
-0: cmpl $0,PA(EXT(start_lock))
- jne 0b
-1: movb $1,%eax
- xchgl %eax,PA(EXT(start_lock)) /* locked */
- testl %eax,%eax
- jnz 0b
-
- cmpl $0,PA(EXT(master_is_up)) /* are we first? */
- jne EXT(slave_start) /* no -- system already up. */
- movl $1,PA(EXT(master_is_up)) /* others become slaves */
-#endif /* NCPUS > 1 */
+ mov %ds, %bx
+ mov %bx, %es
+ mov %eax, %ebp /* Move kernbootstruct to ebp */
+ mov %eax, %ebx /* get pointer to kernbootstruct */
-/*
- * Get startup parameters.
- */
+ mov $EXT(low_eintstack),%esp /* switch to the bootup stack */
-#include <i386/AT386/asm_startup.h>
+ POSTCODE(PSTART_ENTRY)
-/*
- * Build initial page table directory and page tables.
- * %ebx holds first available physical address.
- */
-
- addl $(NBPG-1),%ebx /* round first avail physical addr */
- andl $(-NBPG),%ebx /* to machine page size */
- leal -KVTOPHYS(%ebx),%eax /* convert to virtual address */
- movl %eax,PA(EXT(kpde)) /* save as kernel page table directory */
- movl %ebx,%cr3 /* set physical address in CR3 now */
+ lgdt EXT(gdtptr) /* load GDT */
- movl %ebx,%edi /* clear page table directory */
- movl $(PTES_PER_PAGE),%ecx /* one page of ptes */
- xorl %eax,%eax
+ mov $(KERNEL_DS),%ax /* set kernel data segment */
+ mov %ax, %ds
+ mov %ax, %es
+ mov %ax, %ss
+ xor %ax, %ax /* fs must be zeroed; */
+ mov %ax, %fs /* some bootstrappers don`t do this */
+ mov %ax, %gs
cld
- rep
- stosl /* edi now points to next page */
-/*
- * Use next few pages for page tables.
- */
- addl $(KERNELBASEPDE),%ebx /* point to pde for kernel base */
- movl %edi,%esi /* point to end of current pte page */
-
-/*
- * Enter 1-1 mappings for kernel and for kernel page tables.
- */
- movl $(INTEL_PTE_KERNEL),%eax /* set up pte prototype */
-0:
- cmpl %esi,%edi /* at end of pte page? */
- jb 1f /* if so: */
- movl %edi,%edx /* get pte address (physical) */
- andl $(-NBPG),%edx /* mask out offset in page */
- orl $(INTEL_PTE_KERNEL),%edx /* add pte bits */
- movl %edx,(%ebx) /* set pde */
- addl $4,%ebx /* point to next pde */
- movl %edi,%esi /* point to */
- addl $(NBPG),%esi /* end of new pte page */
-1:
- movl %eax,(%edi) /* set pte */
- addl $4,%edi /* advance to next pte */
- addl $(NBPG),%eax /* advance to next phys page */
- cmpl %edi,%eax /* have we mapped this pte page yet? */
- jb 0b /* loop if not */
+ /* "The Aussie Maneuver" ("Myria" variant) */
+ pushl $(0xcb<<24)|KERNEL32_CS /* reload CS */
+ call .-1
-/*
- * Zero rest of last pte page.
- */
- xor %eax,%eax /* don`t map yet */
-2: cmpl %esi,%edi /* at end of pte page? */
- jae 3f
- movl %eax,(%edi) /* zero mapping */
- addl $4,%edi
- jmp 2b
-3:
-
-#if NCPUS > 1
-/*
- * Grab (waste?) another page for a bootstrap page directory
- * for the other CPUs. We don't want the running CPUs to see
- * addresses 0..3fffff mapped 1-1.
- */
- movl %edi,PA(EXT(mp_boot_pde)) /* save its physical address */
- movl $(PTES_PER_PAGE),%ecx /* and clear it */
- rep
- stosl
-#endif /* NCPUS > 1 */
- movl %edi,PA(EXT(first_avail)) /* save first available phys addr */
-
-/*
- * pmap_bootstrap will enter rest of mappings.
- */
-
-/*
- * Fix initial descriptor tables.
- */
- lea PA(EXT(idt)),%esi /* fix IDT */
- movl $(IDTSZ),%ecx
- movl $(PA(fix_idt_ret)),%ebx
- jmp fix_desc_common /* (cannot use stack) */
-fix_idt_ret:
-
- lea PA(EXT(gdt)),%esi /* fix GDT */
- movl $(GDTSZ),%ecx
- movl $(PA(fix_gdt_ret)),%ebx
- jmp fix_desc_common /* (cannot use stack) */
-fix_gdt_ret:
-
- lea PA(EXT(ldt)),%esi /* fix LDT */
- movl $(LDTSZ),%ecx
- movl $(PA(fix_ldt_ret)),%ebx
- jmp fix_desc_common /* (cannot use stack) */
-fix_ldt_ret:
+paging:
+ andl $0xfffffff0, %esp /* align stack */
+ subl $0xc, %esp
+ pushl %ebp /* push boot args addr */
+ xorl %ebp, %ebp /* zero frame pointer */
+
+ POSTCODE(PSTART_BEFORE_PAGING)
/*
* Turn on paging.
*/
- movl %cr3,%eax /* retrieve kernel PDE phys address */
- movl KERNELBASEPDE(%eax),%ecx
- movl %ecx,(%eax) /* set it also as pte for location */
- /* 0..3fffff, so that the code */
- /* that enters paged mode is mapped */
- /* to identical addresses after */
- /* paged mode is enabled */
-
- addl $4,%eax /* 400000..7fffff */
- movl KERNELBASEPDE(%eax),%ecx
- movl %ecx,(%eax)
-
- movl $EXT(pag_start),%ebx /* first paged code address */
-
- movl %cr0,%eax
- orl $(CR0_PG),%eax /* set PG bit in CR0 */
- orl $(CR0_WP),%eax
- movl %eax,%cr0 /* to enable paging */
-
- jmp *%ebx /* flush prefetch queue */
-
-/*
- * We are now paging, and can run with correct addresses.
- */
-LEXT(pag_start)
- lgdt EXT(gdtptr) /* load GDT */
- lidt EXT(idtptr) /* load IDT */
- LJMP(KERNEL_CS,EXT(vstart)) /* switch to kernel code segment */
-
-/*
- * Master is now running with correct addresses.
- */
-LEXT(vstart)
- mov $(KERNEL_DS),%ax /* set kernel data segment */
- mov %ax,%ds
- mov %ax,%es
- mov %ax,%ss
- mov %ax,EXT(ktss)+TSS_SS0 /* set kernel stack segment */
- /* for traps to kernel */
-#if MACH_KDB
- mov %ax,EXT(dbtss)+TSS_SS0 /* likewise for debug task switch */
- mov %cr3,%eax /* get PDBR into debug TSS */
- mov %eax,EXT(dbtss)+TSS_PDBR
- mov $0,%eax
-#endif
-
- movw $(KERNEL_LDT),%ax /* get LDT segment */
- lldt %ax /* load LDT */
-#if MACH_KDB
- mov %ax,EXT(ktss)+TSS_LDT /* store LDT in two TSS, as well... */
- mov %ax,EXT(dbtss)+TSS_LDT /* ...matters if we switch tasks */
-#endif
- movw $(KERNEL_TSS),%ax
- ltr %ax /* set up KTSS */
-
- mov $CPU_DATA,%ax
- mov %ax,%gs
-
- lea EXT(eintstack),%esp /* switch to the bootup stack */
- call EXT(machine_startup) /* run C code */
+ movl $EXT(IdlePDPT), %eax /* CR3 */
+ movl %eax, %cr3
+ movl %cr4, %eax /* PAE */
+ orl $(CR4_PAE), %eax
+ movl %eax, %cr4
+ movl %cr0,%eax /* paging */
+ orl $(CR0_PG|CR0_WP),%eax
+ movl %eax,%cr0
+
+ POSTCODE(PSTART_VSTART)
+
+ call EXT(vstart) /* run C code */
/*NOTREACHED*/
hlt
-#if NCPUS > 1
-/*
- * master_up is used by the master cpu to signify that it is done
- * with the interrupt stack, etc. See the code in pstart and svstart
- * that this interlocks with.
- */
- .align ALIGN
- .globl EXT(master_up)
-LEXT(master_up)
- pushl %ebp /* set up */
- movl %esp,%ebp /* stack frame */
- movl $0,%ecx /* unlock start_lock */
- xchgl %ecx,EXT(start_lock) /* since we are no longer using */
- /* bootstrap stack */
- leave /* pop stack frame */
- ret
-
/*
- * We aren't the first. Call slave_main to initialize the processor
- * and get Mach going on it.
+ * AP (slave) CPUs enter here.
+ *
+ * Environment:
+ * protected mode, no paging, flat 32-bit address space.
+ * (Code/data/stack segments have base == 0, limit == 4G)
*/
.align ALIGN
- .globl EXT(slave_start)
-LEXT(slave_start)
+ .globl EXT(slave_pstart)
+LEXT(slave_pstart)
cli /* disable interrupts, so we don`t */
/* need IDT for a while */
- movl EXT(kpde)+KVTOPHYS,%ebx /* get PDE virtual address */
- addl $(KVTOPHYS),%ebx /* convert to physical address */
-
- movl PA(EXT(mp_boot_pde)),%edx /* point to the bootstrap PDE */
- movl KERNELBASEPDE(%ebx),%eax
- /* point to pte for KERNELBASE */
- movl %eax,KERNELBASEPDE(%edx)
- /* set in bootstrap PDE */
- movl %eax,(%edx) /* set it also as pte for location */
- /* 0..3fffff, so that the code */
- /* that enters paged mode is mapped */
- /* to identical addresses after */
- /* paged mode is enabled */
- movl %edx,%cr3 /* use bootstrap PDE to enable paging */
-
- movl $EXT(spag_start),%edx /* first paged code address */
-
- movl %cr0,%eax
- orl $(CR0_PG),%eax /* set PG bit in CR0 */
- orl $(CR0_WP),%eax
- movl %eax,%cr0 /* to enable paging */
-
- jmp *%edx /* flush prefetch queue. */
+ xor %ebp, %ebp // zero boot cpu
+ mov $EXT(mp_slave_stack)+PAGE_SIZE, %esp;
+ jmp paging
-/*
- * We are now paging, and can run with correct addresses.
- */
-LEXT(spag_start)
- lgdt EXT(gdtptr) /* load GDT */
- lidt EXT(idtptr) /* load IDT */
- LJMP(KERNEL_CS,EXT(svstart)) /* switch to kernel code segment */
+/* Code to get from real mode to protected mode */
-/*
- * Slave is now running with correct addresses.
- */
-LEXT(svstart)
- mov $(KERNEL_DS),%ax /* set kernel data segment */
- mov %ax,%ds
- mov %ax,%es
- mov %ax,%ss
-
- movl %ebx,%cr3 /* switch to the real kernel PDE */
-
- CPU_NUMBER(%eax)
- movl CX(EXT(interrupt_stack),%eax),%esp /* get stack */
- addl $(INTSTACK_SIZE),%esp /* point to top */
- xorl %ebp,%ebp /* for completeness */
+#define operand_size_prefix .byte 0x66
+#define address_size_prefix .byte 0x67
+#define cs_base_prefix .byte 0x2e
- movl $0,%ecx /* unlock start_lock */
- xchgl %ecx,EXT(start_lock) /* since we are no longer using */
- /* bootstrap stack */
-
-/*
- * switch to the per-cpu descriptor tables
- */
-
- pushl %eax /* pass CPU number */
- call EXT(mp_desc_init) /* set up local table */
- /* pointer returned in %eax */
- subl $4,%esp /* get space to build pseudo-descriptors */
-
- CPU_NUMBER(%eax)
- movw $(GDTSZ*8-1),0(%esp) /* set GDT size in GDT descriptor */
- movl CX(EXT(mp_gdt),%eax),%edx
- addl $KVTOLINEAR,%edx
- movl %edx,2(%esp) /* point to local GDT (linear address) */
- lgdt 0(%esp) /* load new GDT */
-
- movw $(IDTSZ*8-1),0(%esp) /* set IDT size in IDT descriptor */
- movl CX(EXT(mp_idt),%eax),%edx
- addl $KVTOLINEAR,%edx
- movl %edx,2(%esp) /* point to local IDT (linear address) */
- lidt 0(%esp) /* load new IDT */
-
- movw $(KERNEL_LDT),%ax
- lldt %ax /* load new LDT */
-
- movw $(KERNEL_TSS),%ax
- ltr %ax /* load new KTSS */
-
- mov $CPU_DATA,%ax
- mov %ax,%gs
-
- call EXT(slave_main) /* start MACH */
- /*NOTREACHED*/
- hlt
-#endif /* NCPUS > 1 */
+#undef LJMP
+#define LJMP(segment,address) \
+ operand_size_prefix ;\
+ .byte 0xea ;\
+ .long address-EXT(real_mode_bootstrap_base) ;\
+ .word segment
-/*
- * Convert a descriptor from fake to real format.
- *
- * Calls from assembly code:
- * %ebx = return address (physical) CANNOT USE STACK
- * %esi = descriptor table address (physical)
- * %ecx = number of descriptors
- *
- * Calls from C:
- * 0(%esp) = return address
- * 4(%esp) = descriptor table address (physical)
- * 8(%esp) = number of descriptors
- *
- * Fake descriptor format:
- * bytes 0..3 base 31..0
- * bytes 4..5 limit 15..0
- * byte 6 access byte 2 | limit 19..16
- * byte 7 access byte 1
- *
- * Real descriptor format:
- * bytes 0..1 limit 15..0
- * bytes 2..3 base 15..0
- * byte 4 base 23..16
- * byte 5 access byte 1
- * byte 6 access byte 2 | limit 19..16
- * byte 7 base 31..24
- *
- * Fake gate format:
- * bytes 0..3 offset
- * bytes 4..5 selector
- * byte 6 word count << 4 (to match fake descriptor)
- * byte 7 access byte 1
- *
- * Real gate format:
- * bytes 0..1 offset 15..0
- * bytes 2..3 selector
- * byte 4 word count
- * byte 5 access byte 1
- * bytes 6..7 offset 31..16
- */
- .globl EXT(fix_desc)
-LEXT(fix_desc)
- pushl %ebp /* set up */
- movl %esp,%ebp /* stack frame */
- pushl %esi /* save registers */
- pushl %ebx
- movl B_ARG0,%esi /* point to first descriptor */
- movl B_ARG1,%ecx /* get number of descriptors */
- lea 0f,%ebx /* get return address */
- jmp fix_desc_common /* call internal routine */
-0: popl %ebx /* restore registers */
- popl %esi
- leave /* pop stack frame */
- ret /* return */
-
-fix_desc_common:
-0:
- movw 6(%esi),%dx /* get access byte */
- movb %dh,%al
- andb $0x14,%al
- cmpb $0x04,%al /* gate or descriptor? */
- je 1f
-
-/* descriptor */
- movl 0(%esi),%eax /* get base in eax */
- rol $16,%eax /* swap 15..0 with 31..16 */
- /* (15..0 in correct place) */
- movb %al,%dl /* combine bits 23..16 with ACC1 */
- /* in dh/dl */
- movb %ah,7(%esi) /* store bits 31..24 in correct place */
- movw 4(%esi),%ax /* move limit bits 0..15 to word 0 */
- movl %eax,0(%esi) /* store (bytes 0..3 correct) */
- movw %dx,4(%esi) /* store bytes 4..5 */
- jmp 2f
-
-/* gate */
+#define LGDT(address) \
+ cs_base_prefix ;\
+ address_size_prefix ;\
+ operand_size_prefix ;\
+ .word 0x010f ;\
+ .byte 0x15 ;\
+ .long address-EXT(real_mode_bootstrap_base)
+
+.section __HIB,__text
+.align 12 /* Page align for single bcopy_phys() */
+.code32
+Entry(real_mode_bootstrap_base)
+ cli
+
+ LGDT(EXT(protected_mode_gdtr))
+
+ /* set the PE bit of CR0 */
+ mov %cr0, %eax
+ inc %eax
+ mov %eax, %cr0
+
+ /* reload CS register */
+ LJMP(KERNEL32_CS, 1f + REAL_MODE_BOOTSTRAP_OFFSET)
1:
- movw 4(%esi),%ax /* get selector */
- shrb $4,%dl /* shift word count to proper place */
- movw %dx,4(%esi) /* store word count / ACC1 */
- movw 2(%esi),%dx /* get offset 16..31 */
- movw %dx,6(%esi) /* store in correct place */
- movw %ax,2(%esi) /* store selector in correct place */
-2:
- addl $8,%esi /* bump to next descriptor */
- loop 0b /* repeat */
- jmp *%ebx /* all done */
-
-/*
- * put arg in kbd leds and spin a while
- * eats eax, ecx, edx
- */
-#define K_RDWR 0x60
-#define K_CMD_LEDS 0xed
-#define K_STATUS 0x64
-#define K_IBUF_FULL 0x02 /* input (to kbd) buffer full */
-#define K_OBUF_FULL 0x01 /* output (from kbd) buffer full */
-
-ENTRY(set_kbd_leds)
- mov S_ARG0,%cl /* save led value */
-
-0: inb $(K_STATUS),%al /* get kbd status */
- testb $(K_IBUF_FULL),%al /* input busy? */
- jne 0b /* loop until not */
- mov $(K_CMD_LEDS),%al /* K_CMD_LEDS */
- outb %al,$(K_RDWR) /* to kbd */
+ /* we are in protected mode now */
+ /* set up the segment registers */
+ mov $KERNEL_DS, %eax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+ mov $0, %ax
+ movw %ax, %fs
+ movw %ax, %gs
-0: inb $(K_STATUS),%al /* get kbd status */
- testb $(K_OBUF_FULL),%al /* output present? */
- je 0b /* loop if not */
+ POSTCODE(SLAVE_STARTPROG_ENTRY);
- inb $(K_RDWR),%al /* read status (and discard) */
+ mov PROT_MODE_START+REAL_MODE_BOOTSTRAP_OFFSET, %ecx
+ jmp *%ecx
-0: inb $(K_STATUS),%al /* get kbd status */
- testb $(K_IBUF_FULL),%al /* input busy? */
- jne 0b /* loop until not */
-
- mov %cl,%al /* move led value */
- outb %al,$(K_RDWR) /* to kbd */
+Entry(protected_mode_gdtr)
+ .short 160 /* limit (8*6 segs) */
+ .long EXT(master_gdt)
- movl $10000000,%ecx /* spin */
-0: nop
- nop
- loop 0b /* a while */
+Entry(real_mode_bootstrap_end)
- ret
+.section __HIB,__text
+ .align ALIGN
+ .globl EXT(hibernate_machine_entrypoint)
+LEXT(hibernate_machine_entrypoint)
+ mov %eax, %edi // save header pointer
+ /* restore gdt */
+ lgdt EXT(protected_mode_gdtr)
+
+ /* setup the protected mode segment registers */
+ mov $KERNEL_DS, %eax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+ mov $0,%ax /* fs must be zeroed; */
+ mov %ax,%fs
+ mov %ax,%gs
+
+ /* set up the page tables to use BootstrapPTD
+ * as done in idle_pt.c, but this must be done programatically */
+ mov $EXT(IdlePDPT), %eax
+ mov $EXT(BootPTD) + (INTEL_PTE_VALID), %ecx
+ mov $0x0, %edx
+ mov %ecx, (0*8+0)(%eax)
+ mov %edx, (0*8+4)(%eax)
+ add $(PAGE_SIZE), %ecx
+ mov %ecx, (1*8+0)(%eax)
+ mov %edx, (1*8+4)(%eax)
+ add $(PAGE_SIZE), %ecx
+ mov %ecx, (2*8+0)(%eax)
+ mov %edx, (2*8+4)(%eax)
+ add $(PAGE_SIZE), %ecx
+ mov %ecx, (3*8+0)(%eax)
+ mov %edx, (3*8+4)(%eax)
+ mov %eax, %cr3
+
+
+ movl %cr4,%eax
+ orl $(CR4_PAE),%eax
+ movl %eax,%cr4 /* enable page size extensions */
+
+ movl $(MSR_IA32_EFER), %ecx /* MSR number in ecx */
+ rdmsr /* MSR value return in edx: eax */
+ orl $(MSR_IA32_EFER_NXE), %eax /* Set NXE bit in low 32-bits */
+ wrmsr /* Update Extended Feature Enable reg */
+
+ movl %cr0, %eax
+ orl $(CR0_PG|CR0_WP), %eax
+ movl %eax, %cr0 /* ready paging */
+
+ mov $EXT(gIOHibernateRestoreStackEnd), %esp /* setup stack */
+ xorl %ebp, %ebp /* zero frame pointer */
+
+ ljmpl $(KERNEL32_CS), $Ltemp
+Ltemp:
+ xorl %eax, %eax /* Video memory - N/A */
+ pushl %eax
+ pushl %eax
+ pushl %eax
+ mov %edi, %eax /* Pointer to hibernate header */
+ pushl %eax
+ call EXT(hibernate_kernel_entrypoint)
+ /* NOTREACHED */
+ hlt
projects / apple / xnu.git / blobdiff