/* * Copyright (c) 2000-2004 Apple Computer, Inc. All rights reserved. * * @APPLE_LICENSE_HEADER_START@ * * The contents of this file constitute Original Code as defined in and * are subject to the Apple Public Source License Version 1.1 (the * "License"). You may not use this file except in compliance with the * License. Please obtain a copy of the License at * http://www.apple.com/publicsource and read it before using this file. * * This Original Code and all software distributed under the License are * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the * License for the specific language governing rights and limitations * under the License. * * @APPLE_LICENSE_HEADER_END@ */ /* * @OSF_COPYRIGHT@ */ #define __APPLE_API_PRIVATE #include #include #include #include #include #include #include #include #include ; Definitions of the processor type table format, which drives this code. ; The table ("processor_types") is assembled in at the end of this file. #define ptFilter 0 #define ptVersion 4 #define ptRevision 6 #define ptFeatures 8 #define ptCPUCap 12 #define ptPwrModes 16 #define ptPatch 20 #define ptInitRout 24 #define ptRptdProc 28 #define ptLineSize 32 #define ptl1iSize 36 #define ptl1dSize 40 #define ptPTEG 44 #define ptMaxVAddr 48 #define ptMaxPAddr 52 #define ptSize 56 ; We use cr2 for flags: #define bootCPU 10 #define firstInit 9 #define firstBoot 8 /* * Interrupt and bootup stack for initial processor */ .file "start.s" /* * All CPUs start here. * * This code is called from SecondaryLoader * * Various arguments are passed via a table: * R3 = pointer to other startup parameters */ .text ENTRY(resetPOR,TAG_NO_FRAME_USED) li r12,0 ; Get a 0 stw r12,0xF0(0) ; Make sure the special flag is clear mtmsrd r12 ; Make sure we are in 32-bit mode isync ; Really make sure lwz r3,0xF4(0) ; Get the boot_args pointer b startJoin ; Join up... ENTRY(_start_cpu,TAG_NO_FRAME_USED) crclr bootCPU ; Set non-boot processor crclr firstInit ; Set not first time init lwz r30,ppe_paddr(r3) ; Set current per_proc lwz r28,ppe_paddr+4(r3) ; Set current per_proc rlwinm r30,r30,0,1,0 ; Copy low 32 bits to top 32 rlwimi r30,r28,0,0,31 ; Insert low part of 64-bit address in bottom 32 bits subi r29,r3,(ACT_PER_PROC-ppe_vaddr) ; Substract mact.PerProc offset mr r3,r30 ; Set current per_proc ; ; Note that we are just trying to get close. The real TB sync will take ; place later. The value we are loading is set in two places. For the ; main processor, it will be the TB at the last interrupt before we went ; to sleep. For the others, it will be the time just before the main ; processor woke us up. ; lwz r15,ruptStamp(r3) ; Get the timebase from the other processor li r17,0 ; Clear this out lwz r16,ruptStamp+4(r3) ; Get the timebase from the other processor mtspr tbl,r17 ; Clear bottom so we do not tick mtspr tbu,r15 ; Set top mtspr tbl,r16 ; Then bottom again b allstart ENTRY(_start,TAG_NO_FRAME_USED) startJoin: mflr r2 ; Save the return address lis r28,hi16(EXT(PerProcTable)) ; Set PerProcTable lis r30,hi16(EXT(BootProcInfo)) ; Set current per_proc ori r28,r28,lo16(EXT(PerProcTable)) ; Set PerProcTable ori r30,r30,lo16(EXT(BootProcInfo)) ; Set current per_proc stw r30,ppe_paddr+4(r28) ; Set per_proc_entry stw r30,ppe_vaddr(r28) ; Set per_proc_entry subi r29,r28,(ACT_PER_PROC-ppe_vaddr) ; Substract mact.PerProc offset crset bootCPU ; Set boot processor lwz r17,pfAvailable(r30) ; Get the available bits rlwinm. r0,r17,0,pfValidb,pfValidb ; Have we initialized the feature flags yet? crmove firstInit,cr0_eq ; Set if we are doing first time init bne allstart ; Yeah, we must be waking up from sleep... ; ; Here is where we do any one time general low-level initialization lis r20,HIGH_ADDR(fwdisplock) ; Get address of the firmware display lock li r19,0 ; Zorch a register ori r20,r20,LOW_ADDR(fwdisplock) ; Get address of the firmware display lock stw r19,0(r20) ; Make sure the lock is free allstart: mr r31,r3 ; Save away arguments crand firstBoot,bootCPU,firstInit ; Indicate if we are on the initial first processor startup mtsprg 0,r30 ; Set per_proc paddr mtsprg 1,r29 ; Set spr1 li r9,0 ; Clear out a register mtsprg 2,r9 mtsprg 3,r9 li r7,MSR_VM_OFF ; Get real mode MSR mtmsr r7 ; Set the real mode SRR isync lis r26,hi16(processor_types) ; Point to processor table ori r26,r26,lo16(processor_types) ; Other half mfpvr r10 ; Get the PVR nextPVR: lwz r28,ptFilter(r26) ; Get the filter lwz r27,ptVersion(r26) ; Get the version and revision codes and r28,r10,r28 ; Throw away dont care bits cmplw r27,r28 ; Is this the right set? beq donePVR ; We have the right one... addi r26,r26,ptSize ; Point to the next type b nextPVR ; Check it out... donePVR: lwz r20,ptInitRout(r26) ; Grab the special init routine mtlr r20 ; Setup to call the init bf firstBoot,notFirst ; Not first boot, go... ; ; The following code just does a general initialization of the features just ; after the initial first-time boot. This is not done after waking up or on ; any "secondary" processor. Just after the boot-processor init, we copy the ; features to any possible per_proc. ; ; We are just setting defaults. The specific initialization code will modify these ; if necessary. ; lis r18,hi16(EXT(_cpu_capabilities)) ; Get the address of _cpu_capabilities ori r18,r18,lo16(EXT(_cpu_capabilities)) lwz r17,ptCPUCap(r26) ; Get the default cpu capabilities stw r17, 0(r18) ; Save the default value in _cpu_capabilities lwz r17,ptFeatures(r26) ; Pick up the features lwz r18,ptRptdProc(r26) ; Get the reported processor sth r18,pfrptdProc(r30) ; Set the reported processor lwz r13,ptPwrModes(r26) ; Get the supported power modes stw r13,pfPowerModes(r30) ; Set the supported power modes lwz r13,ptLineSize(r26) ; Get the cache line size sth r13,pflineSize(r30) ; Save it lwz r13,ptl1iSize(r26) ; Get icache size stw r13,pfl1iSize(r30) ; Save it lwz r13,ptl1dSize(r26) ; Get dcache size stw r13,pfl1dSize(r30) ; Save it lwz r13,ptPTEG(r26) ; Get PTEG size address stw r13,pfPTEG(r30) ; Save it lwz r13,ptMaxVAddr(r26) ; Get max virtual address stw r13,pfMaxVAddr(r30) ; Save it lwz r13,ptMaxPAddr(r26) ; Get max physical address stw r13,pfMaxPAddr(r30) ; Save it ; Go through the patch table, changing performance sensitive kernel routines based on the ; processor type or other things. lis r11,hi16(EXT(patch_table)) ori r11,r11,lo16(EXT(patch_table)) lwz r19,ptPatch(r26) ; Get ptPatch field patch_loop: lwz r16,patchType(r11) ; Load the patch type lwz r15,patchValue(r11) ; Load the patch value cmplwi cr1,r16,PATCH_FEATURE ; Is it a patch feature entry cmplwi cr7,r16,PATCH_END_OF_TABLE ; end of table? and. r14,r15,r19 ; Is it set in the patch feature crandc cr0_eq,cr1_eq,cr0_eq ; Do we have a match beq cr7,doOurInit ; end of table, Go do processor specific initialization beq patch_apply ; proc feature matches, so patch memory cmplwi cr1,r16,PATCH_PROCESSOR ; Is it a patch processor entry cmplw cr0,r15,r18 ; Check matching processor crand cr0_eq,cr1_eq,cr0_eq ; Do we have a match bne patch_skip ; No, skip patch memory patch_apply: lwz r13,patchAddr(r11) ; Load the address to patch lwz r14,patchData(r11) ; Load the patch data stw r14,0(r13) ; Patch the location dcbf 0,r13 ; Flush the old one sync ; Make sure we see it all icbi 0,r13 ; Flush the i-cache isync ; Hang out sync ; Hang out some more... patch_skip: addi r11,r11,peSize ; Point to the next patch entry b patch_loop ; handle next ; Additional processors join here after skipping above code. notFirst: lwz r17,pfAvailable(r30) ; Get our features doOurInit: mr. r20,r20 ; See if initialization routine crand firstBoot,bootCPU,firstInit ; Indicate if we are on the initial first processor startup bnelrl ; Do the initialization ori r17,r17,lo16(pfValid) ; Set the valid bit stw r17,pfAvailable(r30) ; Set the available features rlwinm. r0,r17,0,pf64Bitb,pf64Bitb ; Is this a 64-bit machine? mtsprg 2,r17 ; Remember the feature flags bne++ start64 ; Skip following if 64-bit... mfspr r6,hid0 ; Get the HID0 rlwinm r6,r6,0,sleep+1,doze-1 ; Remove any vestiges of sleep mtspr hid0,r6 ; Set the insominac HID0 isync ; Clear the BAT registers li r9,0 ; Clear out a register sync isync mtdbatu 0,r9 ; Invalidate maps mtdbatl 0,r9 ; Invalidate maps mtdbatu 1,r9 ; Invalidate maps mtdbatl 1,r9 ; Invalidate maps mtdbatu 2,r9 ; Invalidate maps mtdbatl 2,r9 ; Invalidate maps mtdbatu 3,r9 ; Invalidate maps mtdbatl 3,r9 ; Invalidate maps sync isync mtibatu 0,r9 ; Invalidate maps mtibatl 0,r9 ; Invalidate maps mtibatu 1,r9 ; Invalidate maps mtibatl 1,r9 ; Invalidate maps mtibatu 2,r9 ; Invalidate maps mtibatl 2,r9 ; Invalidate maps mtibatu 3,r9 ; Invalidate maps mtibatl 3,r9 ; Invalidate maps sync isync b startcommon ; Go join up the common start routine start64: lis r5,hi16(startcommon) ; Get top of address of continue point mfspr r6,hid0 ; Get the HID0 ori r5,r5,lo16(startcommon) ; Get low of address of continue point lis r9,hi16(MASK(MSR_HV)|MASK(MSR_SF)) ; ? lis r20,hi16(dozem|napm|sleepm) ; Get mask of power saving features li r7,MSR_VM_OFF ; Get real mode MSR sldi r9,r9,32 ; Slide into position sldi r20,r20,32 ; Slide power stuff into position or r9,r9,r7 ; Form initial MSR andc r6,r6,r20 ; Remove any vestiges of sleep isync mtspr hid0,r6 ; Set the insominac HID0 mfspr r6,hid0 ; Get it mfspr r6,hid0 ; Get it mfspr r6,hid0 ; Get it mfspr r6,hid0 ; Get it mfspr r6,hid0 ; Get it mfspr r6,hid0 ; Get it isync mtsrr0 r5 ; Set the continue point mtsrr1 r9 ; Set our normal disabled MSR rfid ; Tally ho... .align 5 startcommon: rlwinm. r0,r17,0,pfFloatb,pfFloatb ; See if there is floating point beq- noFloat ; Nope, this is a really stupid machine... li r0,MSR_VM_OFF|MASK(MSR_FP) ; Enable for floating point mtmsr r0 /* Set the standard MSR values */ isync lis r5,HIGH_ADDR(EXT(FloatInit)) /* Get top of floating point init value */ ori r5,r5,LOW_ADDR(EXT(FloatInit)) /* Slam bottom */ lfd f0,0(r5) /* Initialize FP0 */ fmr f1,f0 /* Ours in not */ fmr f2,f0 /* to wonder why, */ fmr f3,f0 /* ours is but to */ fmr f4,f0 /* do or die! */ fmr f5,f0 fmr f6,f0 fmr f7,f0 fmr f8,f0 fmr f9,f0 fmr f10,f0 fmr f11,f0 fmr f12,f0 fmr f13,f0 fmr f14,f0 fmr f15,f0 fmr f16,f0 fmr f17,f0 fmr f18,f0 fmr f19,f0 fmr f20,f0 fmr f21,f0 fmr f22,f0 fmr f23,f0 fmr f24,f0 fmr f25,f0 fmr f26,f0 fmr f27,f0 fmr f28,f0 fmr f29,f0 fmr f30,f0 fmr f31,f0 li r0, MSR_VM_OFF ; Turn off floating point mtmsr r0 isync noFloat: rlwinm. r0,r17,0,pfAltivecb,pfAltivecb ; See if there is Altivec beq- noVector ; Nope... li r0,0 ; Clear out a register lis r7,hi16(MSR_VEC_ON) ; Get real mode MSR + Altivec ori r7,r7,lo16(MSR_VM_OFF) ; Get real mode MSR + Altivec mtmsr r7 ; Set the real mode SRR */ isync ; Make sure it has happened lis r5,hi16(EXT(QNaNbarbarian)) ; Altivec initializer ori r5,r5,lo16(EXT(QNaNbarbarian)) ; Altivec initializer mtspr vrsave,r0 ; Set that no VRs are used yet */ vspltish v1,1 ; Turn on the non-Java bit and saturate vspltisw v0,1 ; Turn on the saturate bit vxor v1,v1,v0 ; Turn off saturate and leave non-Java set lvx v0,br0,r5 ; Initialize VR0 mtvscr v1 ; Clear the vector status register vor v2,v0,v0 ; Copy into the next register vor v1,v0,v0 ; Copy into the next register vor v3,v0,v0 ; Copy into the next register vor v4,v0,v0 ; Copy into the next register vor v5,v0,v0 ; Copy into the next register vor v6,v0,v0 ; Copy into the next register vor v7,v0,v0 ; Copy into the next register vor v8,v0,v0 ; Copy into the next register vor v9,v0,v0 ; Copy into the next register vor v10,v0,v0 ; Copy into the next register vor v11,v0,v0 ; Copy into the next register vor v12,v0,v0 ; Copy into the next register vor v13,v0,v0 ; Copy into the next register vor v14,v0,v0 ; Copy into the next register vor v15,v0,v0 ; Copy into the next register vor v16,v0,v0 ; Copy into the next register vor v17,v0,v0 ; Copy into the next register vor v18,v0,v0 ; Copy into the next register vor v19,v0,v0 ; Copy into the next register vor v20,v0,v0 ; Copy into the next register vor v21,v0,v0 ; Copy into the next register vor v22,v0,v0 ; Copy into the next register vor v23,v0,v0 ; Copy into the next register vor v24,v0,v0 ; Copy into the next register vor v25,v0,v0 ; Copy into the next register vor v26,v0,v0 ; Copy into the next register vor v27,v0,v0 ; Copy into the next register vor v28,v0,v0 ; Copy into the next register vor v29,v0,v0 ; Copy into the next register vor v30,v0,v0 ; Copy into the next register vor v31,v0,v0 ; Copy into the next register li r0, MSR_VM_OFF ; Turn off vectors mtmsr r0 isync noVector: bl EXT(cacheInit) ; Initializes all caches (including the TLB) bt bootCPU,run32 mfsprg r30,0 ; Phys per proc lwz r29,PP_HIBERNATE(r30) andi. r29, r29, 1 beq noHashTableInit ; Skip following if not waking from from hibernate bl EXT(hw_clear_maps) ; Mark all maps as absent from hash table bl EXT(hw_hash_init) ; Clear hash table bl EXT(save_snapshot_restore) ; Reset save area chains noHashTableInit: bl EXT(hw_setup_trans) ; Set up hardware needed for translation bl EXT(hw_start_trans) ; Start translating run32: rlwinm. r0,r17,0,pf64Bitb,pf64Bitb ; Is this a 64-bit machine? beq++ isnot64 ; Skip following if not 64-bit... mfmsr r29 ; Get the MSR rldicl r29,r29,0,MSR_SF_BIT+1 ; turn 64-bit mode off mtmsrd r29 ; Set it isync ; Make sure isnot64: bf bootCPU,callcpu lis r29,HIGH_ADDR(EXT(intstack)) ; move onto interrupt stack ori r29,r29,LOW_ADDR(EXT(intstack)) addi r29,r29,INTSTACK_SIZE-FM_SIZE li r28,0 stw r28,FM_BACKPTR(r29) ; store a null frame backpointer mr r1,r29 mr r3,r31 ; Restore any arguments we may have trashed ; Note that we exit from here with translation still off bl EXT(ppc_init) ; Jump into boot init code BREAKPOINT_TRAP callcpu: mfsprg r31,1 ; Fake activation pointer lwz r31,ACT_PER_PROC(r31) ; Load per_proc lwz r29,PP_INTSTACK_TOP_SS(r31) ; move onto interrupt stack li r28,0 stw r28,FM_BACKPTR(r29) ; store a null frame backpointer mr r1,r29 ; move onto new stack mr r3,r31 ; Restore any arguments we may have trashed ; Note that we exit from here with translation on bl EXT(ppc_init_cpu) ; Jump into cpu init code BREAKPOINT_TRAP ; Should never return ; ; Specific processor initialization routines ; ; 750 init750: bf firstBoot, init750nb ; No init for wakeup.... mfspr r13,l2cr ; Get the L2CR rlwinm. r0,r13,0,l2e,l2e ; Any L2? bne+ i750hl2 ; Yes... rlwinm r17,r17,0,pfL2b+1,pfL2b-1 ; No L2, turn off feature i750hl2: lis r14,hi16(256*1024) ; Base L2 size addis r15,r13,0x3000 ; Hah... Figure this one out... rlwinm r15,r15,4,30,31 ; Isolate rlwinm. r8,r13,0,l2siz,l2sizf ; Was size valid? slw r14,r14,r15 ; Set 256KB, 512KB, or 1MB beq- init750l2none ; Not a valid setting... stw r13,pfl2crOriginal(r30) ; Shadow the L2CR stw r13,pfl2cr(r30) ; Shadow the L2CR stw r14,pfl2Size(r30) ; Set the L2 size b init750l2done ; Done with L2 init750l2none: rlwinm r17,r17,0,pfL2b+1,pfL2b-1 ; No level 2 cache init750l2done: mfspr r11,hid0 ; Get the current HID0 stw r11,pfHID0(r30) ; Save the HID0 value blr ; Return... init750nb: lwz r11,pfHID0(r30) ; Get HID0 sync mtspr hid0,r11 ; Set the HID isync sync blr ; 750CX init750CX: bf firstBoot, init750 ; No init for wakeup.... mfspr r13,hid1 ; Get HID1 li r14,lo16(0xFD5F) ; Get valid rlwinm r13,r13,4,28,31 ; Isolate slw r14,r14,r13 ; Position rlwimi r17,r14,15-pfCanNapb,pfCanNapb,pfCanNapb ; Set it b init750 ; Join common... ; 750FX init750FX: bf firstBoot, init750FXnb mfspr r11, hid1 stw r11, pfHID1(r30) ; Save the HID1 value b init750 init750FXnb: lwz r13, pfHID0(r30) ; Get HID0 lwz r11, pfHID1(r30) ; Get HID1 rlwinm. r0, r11, 0, hid1ps, hid1ps ; Isolate the hid1ps bit beq init750FXnb2 ; Clear BTIC if hid1ps set rlwinm r13, r13, 0, btic+1, btic-1 ; Clear the BTIC bit init750FXnb2: sync mtspr hid0, r13 ; Set the HID isync sync rlwinm r12, r11, 0, hid1ps+1, hid1ps-1 ; Select PLL0 mtspr hid1, r12 ; Restore PLL config mftb r13 ; Wait 5000 ticks (> 200 us) init750FXnbloop: mftb r14 sub r14, r14, r13 cmpli cr0, r14, 5000 ble init750FXnbloop mtspr hid1, r11 ; Select the desired PLL blr ; 750FX vers 2.0 or later init750FXV2: bf firstBoot, init750FXV2nb ; Wake from sleep mfspr r11, hid2 stw r11, pfHID2(r30) ; Save the HID2 value b init750FX ; Continue with 750FX init init750FXV2nb: lwz r13, pfHID2(r30) ; Get HID2 rlwinm r13, r13, 0, hid2vmin+1, hid2vmin-1 ; Clear the vmin bit mtspr hid2, r13 ; Restore HID2 value sync ; Wait for it to be done b init750FX ; 7400 init7400: bf firstBoot,i7400nb ; Do different if not initial boot... mfspr r13,l2cr ; Get the L2CR rlwinm. r0,r13,0,l2e,l2e ; Any L2? bne+ i7400hl2 ; Yes... rlwinm r17,r17,0,pfL2b+1,pfL2b-1 ; No L2, turn off feature i7400hl2: lis r14,hi16(256*1024) ; Base L2 size addis r15,r13,0x3000 ; Hah... Figure this one out... rlwinm r15,r15,4,30,31 slw r14,r14,r15 ; Set 256KB, 512KB, 1MB, or 2MB stw r13,pfl2crOriginal(r30) ; Shadow the L2CR stw r13,pfl2cr(r30) ; Shadow the L2CR stw r14,pfl2Size(r30) ; Set the L2 size mfspr r11,hid0 ; Get the current HID0 oris r11,r11,hi16(emcpm|eiecm) ; ? mtspr hid0,r11 ; ? isync stw r11,pfHID0(r30) ; Save the HID0 value mfspr r11,msscr0 ; Get the msscr0 register stw r11,pfMSSCR0(r30) ; Save the MSSCR0 value mfspr r11,msscr1 ; Get the msscr1 register stw r11,pfMSSCR1(r30) ; Save the MSSCR1 value blr ; Return... i7400nb: li r11,0 mtspr l2cr,r11 ; Make sure L2CR is zero lwz r11,pfHID0(r30) ; Get HID0 sync mtspr hid0,r11 ; Set the HID isync sync lwz r11,pfMSSCR0(r30) ; Get MSSCR0 isync sync mtspr msscr0,r11 ; Set the MSSCR0 lwz r11,pfMSSCR1(r30) ; Get msscr1 isync sync mtspr msscr1,r11 ; Set the msscr1 isync sync blr ; 7400 (ver 2.0 - ver 2.7) init7400v2_7: bf firstBoot, init7400 mfspr r13, hid0 ; Get the HID0 ori r13, r13, nopdstm ; ? mtspr hid0, r13 ; Set the HID0 isync sync b init7400 ; 7410 ; Note that this is the same as 7400 except we initialize the l2cr2 register init7410: li r13,0 ; Clear mtspr 1016,r13 ; Turn off direct cache b init7400 ; Join up with common.... ; 745X - Any 7450 family processor init745X: bf firstBoot,init745Xnb ; Do different if not initial boot... mfspr r13,l2cr ; Get the L2CR rlwinm. r0,r13,0,l2e,l2e ; Any L2? bne+ init745Xhl2 ; Yes... rlwinm r17,r17,0,pfL2b+1,pfL2b-1 ; No L2, turn off feature init745Xhl2: mfpvr r14 ; Get processor version rlwinm r14,r14,16,16,31 ; Isolate processor version cmpli cr0, r14, PROCESSOR_VERSION_7457 ; Test for 7457 or cmpli cr1, r14, PROCESSOR_VERSION_7447A ; 7447A cror cr0_eq, cr1_eq, cr0_eq lis r14,hi16(512*1024) ; 512KB L2 beq init745Xhl2_2 lis r14,hi16(256*1024) ; Base L2 size rlwinm r15,r13,22,12,13 ; Convert to 256k, 512k, or 768k add r14,r14,r15 ; Add in minimum init745Xhl2_2: stw r13,pfl2crOriginal(r30) ; Shadow the L2CR stw r13,pfl2cr(r30) ; Shadow the L2CR stw r14,pfl2Size(r30) ; Set the L2 size ; Take care of level 3 cache mfspr r13,l3cr ; Get the L3CR rlwinm. r0,r13,0,l3e,l3e ; Any L3? bne+ init745Xhl3 ; Yes... rlwinm r17,r17,0,pfL3b+1,pfL3b-1 ; No L3, turn off feature init745Xhl3: cmplwi cr0,r13,0 ; No L3 if L3CR is zero beq- init745Xnone ; Go turn off the features... lis r14,hi16(1024*1024) ; Base L3 size rlwinm r15,r13,4,31,31 ; Get size multiplier slw r14,r14,r15 ; Set 1 or 2MB stw r13,pfl3crOriginal(r30) ; Shadow the L3CR stw r13,pfl3cr(r30) ; Shadow the L3CR stw r14,pfl3Size(r30) ; Set the L3 size b init745Xfin ; Return.... init745Xnone: rlwinm r17,r17,0,pfL3fab+1,pfL3b-1 ; No 3rd level cache or assist rlwinm r11,r17,pfWillNapb-pfCanNapb,pfCanNapb,pfCanNapb ; Set pfCanNap if pfWillNap is set or r17,r17,r11 init745Xfin: rlwinm r17,r17,0,pfWillNapb+1,pfWillNapb-1 ; Make sure pfWillNap is not set mfspr r11,hid0 ; Get the current HID0 stw r11,pfHID0(r30) ; Save the HID0 value mfspr r11,hid1 ; Get the current HID1 stw r11,pfHID1(r30) ; Save the HID1 value mfspr r11,msscr0 ; Get the msscr0 register stw r11,pfMSSCR0(r30) ; Save the MSSCR0 value mfspr r11,msscr1 ; Get the msscr1 register stw r11,pfMSSCR1(r30) ; Save the MSSCR1 value mfspr r11,ictrl ; Get the ictrl register stw r11,pfICTRL(r30) ; Save the ICTRL value mfspr r11,ldstcr ; Get the ldstcr register stw r11,pfLDSTCR(r30) ; Save the LDSTCR value mfspr r11,ldstdb ; Get the ldstdb register stw r11,pfLDSTDB(r30) ; Save the LDSTDB value mfspr r11,pir ; Get the pir register stw r11,pfBootConfig(r30) ; Save the BootConfig value blr ; Return.... init745Xnb: lwz r11,pfHID0(r30) ; Get HID0 sync mtspr hid0,r11 ; Set the HID isync lwz r11,pfHID1(r30) ; Get HID1 sync mtspr hid1,r11 ; Set the HID isync lwz r11,pfMSSCR0(r30) ; Get MSSCR0 sync mtspr msscr0,r11 ; Set the MSSCR0 isync sync lwz r11,pfICTRL(r30) ; Get ICTRL sync mtspr ictrl,r11 ; Set the ICTRL isync sync lwz r11,pfLDSTCR(r30) ; Get LDSTCR sync mtspr ldstcr,r11 ; Set the LDSTCR isync sync lwz r11,pfLDSTDB(r30) ; Get LDSTDB sync mtspr ldstdb,r11 ; Set the LDSTDB isync sync blr ; 7450 - Specific init7450: bf firstBoot, init745X ; Not boot, use standard init mfspr r13, pir ; Get BootConfig from PIR rlwinm. r14, r13, 0, 20, 23 ; Is the pdet value zero bne init7450done ; No, done for now ori r13, r13, 0x0400 ; Force pdet value to 4 mtspr pir, r13 ; Write back the BootConfig init7450done: b init745X ; Continue with standard init init970: lis r20,8 ; Set up for 512K L2 init970x: li r0,0 ; Clear this mtspr hior,r0 ; Make sure that 0 is interrupt prefix bf firstBoot,init970nb ; No init for wakeup or second processor.... ; ; We can not query or change the L2 size. We will just ; phoney up a L2CR to make sysctl "happy" and set the ; L2 size to 512K. ; lis r0,0x8000 ; Synthesize a "valid" but non-existant L2CR stw r0,pfl2crOriginal(r30) ; Set a dummy L2CR stw r0,pfl2cr(r30) ; Set a dummy L2CR stw r20,pfl2Size(r30) ; Set the L2 size mfspr r11,hid0 ; Get original hid0 std r11,pfHID0(r30) ; Save original mfspr r11,hid1 ; Get original hid1 std r11,pfHID1(r30) ; Save original mfspr r11,hid4 ; Get original hid4 std r11,pfHID4(r30) ; Save original mfspr r11,hid5 ; Get original hid5 std r11,pfHID5(r30) ; Save original lis r0, hi16(dnapm) ; Create a mask for the dnap bit sldi r0, r0, 32 ; Shift to the top half ld r11,pfHID0(r30) ; Load the hid0 value andc r11, r11, r0 ; Clear the dnap bit isync mtspr hid0,r11 ; Stuff it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it isync lis r0,(pcfValid|pcfLarge|pcfDedSeg)<<8 ; Set the valid bit, dedicated segment, and large page flags ori r0,r0,(24<<8)|24 ; Add in the 16M page size stw r0,lgpPcfg+(pcfSize*pcfLargePcfg)(0) ; Set the 16M primary large page configuration entry blr ; ; Start up code for second processor or wake up from sleep ; init970nb: lis r0, hi16(dnapm) ; Create a mask for the dnap bit sldi r0, r0, 32 ; Shift to the top half ld r11,pfHID0(r30) ; Load the hid0 value andc r11, r11, r0 ; Clear the dnap bit isync mtspr hid0,r11 ; Stuff it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it mfspr r11,hid0 ; Get it isync ld r20,pfHID1(r30) ; Get it isync mtspr hid1,r20 ; Stick it mtspr hid1,r20 ; Stick it again isync ld r11,pfHID4(r30) ; Get it sync mtspr hid4,r11 ; Stick it isync lis r11,0xE000 ; Get the unlikeliest ESID possible srdi r11,r11,1 ; Make 0x7FFFFFFFF0000000 slbie r11 ; Make sure the ERAT is cleared ld r11,pfHID5(r30) ; Get it mtspr hid5,r11 ; Set it isync ; ; May have changed dcbz mode so kill icache ; eqv r13,r13,r13 ; Get a constant -1 mr r14,r20 ; Save HID1 rldimi r14,r13,54,9 ; Set force icbi match mode li r11,0 ; Set start if ICBI range isync mtspr hid1,r14 ; Stick it mtspr hid1,r14 ; Stick it again isync inin970ki: icbi 0,r11 ; Kill I$ addi r11,r11,128 ; Next line andis. r0,r11,1 ; Have we done them all? beq++ inin970ki ; Not yet... isync mtspr hid1,r20 ; Stick it mtspr hid1,r20 ; Stick it again isync blr ; Leave... ; Unsupported Processors initUnsupported: mtlr r2 ; Restore the return address blr ; Return to the booter ; ; Processor to feature table ; .align 2 - Always on word boundary ; .long ptFilter - Mask of significant bits in the Version/Revision code ; - NOTE: Always order from most restrictive to least restrictive matching ; .short ptVersion - Version code from PVR. Always start with 0 which is default ; .short ptRevision - Revision code from PVR. A zero value denotes the generic attributes if not specific ; .long ptFeatures - Available features ; .long ptCPUCap - Default value for _cpu_capabilities ; .long ptPwrModes - Available power management features ; .long ptPatch - Patch features ; .long ptInitRout - Initilization routine. Can modify any of the other attributes. ; .long ptRptdProc - Processor type reported ; .long ptLineSize - Level 1 cache line size ; .long ptl1iSize - Level 1 instruction cache size ; .long ptl1dSize - Level 1 data cache size ; .long ptPTEG - Size of PTEG ; .long ptMaxVAddr - Maximum effective address ; .long ptMaxPAddr - Maximum physical address ; .align 2 processor_types: ; 750CX (ver 2.x) .align 2 .long 0xFFFF0F00 ; 2.x vers .short PROCESSOR_VERSION_750 .short 0x0200 .long pfFloat | pfCanSleep | pfCanNap | pfCanDoze | pf32Byte | pfL2 .long kCache32 | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init750CX .long CPU_SUBTYPE_POWERPC_750 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 32 ; 750 (generic) .align 2 .long 0xFFFF0000 ; All revisions .short PROCESSOR_VERSION_750 .short 0 .long pfFloat | pfCanSleep | pfCanNap | pfCanDoze | pf32Byte | pfL2 .long kCache32 | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init750 .long CPU_SUBTYPE_POWERPC_750 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 32 ; 750FX (ver 1.x) .align 2 .long 0xFFFF0F00 ; 1.x vers .short PROCESSOR_VERSION_750FX .short 0x0100 .long pfFloat | pfCanSleep | pfCanNap | pfCanDoze | pfSlowNap | pfNoMuMMCK | pf32Byte | pfL2 .long kCache32 | kHasGraphicsOps | kHasStfiwx .long pmDualPLL .long PatchExt32 .long init750FX .long CPU_SUBTYPE_POWERPC_750 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 32 ; 750FX (generic) .align 2 .long 0xFFFF0000 ; All revisions .short PROCESSOR_VERSION_750FX .short 0 .long pfFloat | pfCanSleep | pfCanNap | pfCanDoze | pfSlowNap | pfNoMuMMCK | pf32Byte | pfL2 .long kCache32 | kHasGraphicsOps | kHasStfiwx .long pmDualPLL | pmDPLLVmin .long PatchExt32 .long init750FXV2 .long CPU_SUBTYPE_POWERPC_750 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 32 ; 7400 (ver 2.0 - ver 2.7) .align 2 .long 0xFFFFFFF8 ; ver 2.0 - 2.7 .short PROCESSOR_VERSION_7400 .short 0x0200 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pfCanDoze | pf32Byte | pfL1fa | pfL2 | pfL2fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init7400v2_7 .long CPU_SUBTYPE_POWERPC_7400 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 32 ; 7400 (generic) .align 2 .long 0xFFFF0000 ; All revisions .short PROCESSOR_VERSION_7400 .short 0 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pfCanDoze | pf32Byte | pfL1fa | pfL2 | pfL2fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init7400 .long CPU_SUBTYPE_POWERPC_7400 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7410 (ver 1.1) .align 2 .long 0xFFFFFFFF ; Exact match .short PROCESSOR_VERSION_7400 .short 0x1101 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pfCanDoze | pf32Byte | pfL1fa | pfL2 | pfL2fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init7410 .long CPU_SUBTYPE_POWERPC_7400 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7410 (generic) .align 2 .long 0xFFFF0000 ; All other revisions .short PROCESSOR_VERSION_7410 .short 0 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pfCanDoze | pf32Byte | pfL1fa | pfL2 | pfL2fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init7410 .long CPU_SUBTYPE_POWERPC_7400 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7450 (ver 1.xx) .align 2 .long 0xFFFFFF00 ; Just revisions 1.xx .short PROCESSOR_VERSION_7450 .short 0x0100 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfNoMSRir | pfNoL2PFNap | pfLClck | pf32Byte | pfL2 | pfL2fa | pfL2i | pfL3 | pfL3fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init7450 .long CPU_SUBTYPE_POWERPC_7450 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7450 (2.0) .align 2 .long 0xFFFFFFFF ; Just revision 2.0 .short PROCESSOR_VERSION_7450 .short 0x0200 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfNoMSRir | pfNoL2PFNap | pfLClck | pf32Byte | pfL2 | pfL2fa | pfL2i | pfL3 | pfL3fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init7450 .long CPU_SUBTYPE_POWERPC_7450 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7450 (2.1) .align 2 .long 0xFFFF0000 ; All other revisions .short PROCESSOR_VERSION_7450 .short 0 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfWillNap | pfNoMSRir | pfNoL2PFNap | pfLClck | pf32Byte | pfL2 | pfL2fa | pfL2i | pfL3 | pfL3fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init7450 .long CPU_SUBTYPE_POWERPC_7450 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7455 (1.xx) Just like 7450 2.0 .align 2 .long 0xFFFFFF00 ; Just revisions 1.xx .short PROCESSOR_VERSION_7455 .short 0x0100 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfNoMSRir | pfNoL2PFNap | pfLClck | pf32Byte | pfL2 | pfL2fa | pfL2i | pfL3 | pfL3fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init745X .long CPU_SUBTYPE_POWERPC_7450 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7455 (2.0) .align 2 .long 0xFFFFFFFF ; Just revision 2.0 .short PROCESSOR_VERSION_7455 .short 0x0200 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfWillNap | pfNoMSRir | pfNoL2PFNap | pfLClck | pf32Byte | pfL2 | pfL2fa | pfL2i | pfL3 | pfL3fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init745X .long CPU_SUBTYPE_POWERPC_7450 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7455 (2.1) .align 2 .long 0xFFFF0000 ; All other revisions .short PROCESSOR_VERSION_7455 .short 0 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pfNoMSRir | pfNoL2PFNap | pfLClck | pf32Byte | pfL2 | pfL2fa | pfL2i | pfL3 | pfL3fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init745X .long CPU_SUBTYPE_POWERPC_7450 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7457 .align 2 .long 0xFFFF0000 ; All revisions .short PROCESSOR_VERSION_7457 .short 0 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pfNoMSRir | pfNoL2PFNap | pfLClck | pf32Byte | pfL2 | pfL2fa | pfL2i | pfL3 | pfL3fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long init745X .long CPU_SUBTYPE_POWERPC_7450 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 7447A .align 2 .long 0xFFFF0000 ; All revisions .short PROCESSOR_VERSION_7447A .short 0 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pfNoMSRir | pfNoL2PFNap | pfLClck | pf32Byte | pfL2 | pfL2fa | pfL2i | pfL3 | pfL3fa | pfHasDcba .long kHasAltivec | kCache32 | kDcbaAvailable | kDataStreamsRecommended | kDataStreamsAvailable | kHasGraphicsOps | kHasStfiwx .long pmDFS .long PatchExt32 .long init745X .long CPU_SUBTYPE_POWERPC_7450 .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 36 ; 970 .align 2 .long 0xFFFF0000 ; All versions so far .short PROCESSOR_VERSION_970 .short 0 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pf128Byte | pf64Bit | pfL2 | pfSCOMFixUp .long kHasAltivec | k64Bit | kCache128 | kDataStreamsAvailable | kDcbtStreamsRecommended | kDcbtStreamsAvailable | kHasGraphicsOps | kHasStfiwx | kHasFsqrt .long 0 .long PatchLwsync .long init970 .long CPU_SUBTYPE_POWERPC_970 .long 128 .long 64*1024 .long 32*1024 .long 128 .long 65 .long 42 ; 970FX .align 2 .long 0xFFFF0000 ; All versions so far .short PROCESSOR_VERSION_970FX .short 0 .long pfFloat | pfAltivec | pfSMPcap | pfCanSleep | pfCanNap | pf128Byte | pf64Bit | pfL2 .long kHasAltivec | k64Bit | kCache128 | kDataStreamsAvailable | kDcbtStreamsRecommended | kDcbtStreamsAvailable | kHasGraphicsOps | kHasStfiwx | kHasFsqrt .long pmPowerTune .long PatchLwsync .long init970 .long CPU_SUBTYPE_POWERPC_970 .long 128 .long 64*1024 .long 32*1024 .long 128 .long 65 .long 42 ; All other processors are not supported .align 2 .long 0x00000000 ; Matches everything .short 0 .short 0 .long pfFloat | pf32Byte .long kCache32 | kHasGraphicsOps | kHasStfiwx .long 0 .long PatchExt32 .long initUnsupported .long CPU_SUBTYPE_POWERPC_ALL .long 32 .long 32*1024 .long 32*1024 .long 64 .long 52 .long 32