/* * Copyright (c) 2000-2005 Apple Computer, Inc. All rights reserved. * * @APPLE_LICENSE_HEADER_START@ * * The contents of this file constitute Original Code as defined in and * are subject to the Apple Public Source License Version 1.1 (the * "License"). You may not use this file except in compliance with the * License. Please obtain a copy of the License at * http://www.apple.com/publicsource and read it before using this file. * * This Original Code and all software distributed under the License are * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the * License for the specific language governing rights and limitations * under the License. * * @APPLE_LICENSE_HEADER_END@ */ #include #include #include #include #include #define STRING ascii #define ILK_LOCKED 0x01 #define WAIT_FLAG 0x02 #define WANT_UPGRADE 0x04 #define WANT_EXCL 0x08 #define TH_FN_OWNED 0x01 # volatile CR bits #define hwtimeout 20 #define mlckmiss 21 #define RW_DATA 0 #define PROLOG(space) \ stwu r1,-(FM_ALIGN(space)+FM_SIZE)(r1) __ASMNL__ \ mfcr r2 __ASMNL__ \ mflr r0 __ASMNL__ \ stw r3,FM_ARG0(r1) __ASMNL__ \ stw r11,FM_ARG0+0x04(r1) __ASMNL__ \ stw r2,(FM_ALIGN(space)+FM_SIZE+FM_CR_SAVE)(r1) __ASMNL__ \ stw r0,(FM_ALIGN(space)+FM_SIZE+FM_LR_SAVE)(r1) __ASMNL__ #define EPILOG \ lwz r1,0(r1) __ASMNL__ \ lwz r0,FM_LR_SAVE(r1) __ASMNL__ \ mtlr r0 __ASMNL__ /* * void hw_lock_init(hw_lock_t) * * Initialize a hardware lock. */ .align 5 .globl EXT(hw_lock_init) LEXT(hw_lock_init) li r0, 0 ; set lock to free == 0 stw r0, 0(r3) ; Initialize the lock blr /* * unsigned int hw_lock_bit(hw_lock_t, unsigned int bit, unsigned int timeout) * * Try to acquire spin-lock. The second parameter is the bit mask to test and set. * multiple bits may be set. Return success (1) or failure (0). * Attempt will fail after timeout ticks of the timebase. */ .align 5 .globl EXT(hw_lock_bit) LEXT(hw_lock_bit) crset hwtimeout ; timeout option mr r12,r4 ; Load bit mask mr r4,r5 ; Load timeout value b lckcomm ; Join on up... /* * void hw_lock_lock(hw_lock_t) * * Acquire lock, spinning until it becomes available. * Return with preemption disabled. * We will just set a default timeout and jump into the NORMAL timeout lock. */ .align 5 .globl EXT(hw_lock_lock) LEXT(hw_lock_lock) crclr hwtimeout ; no timeout option li r4,0 ; request default timeout value li r12,ILK_LOCKED ; Load bit mask b lckcomm ; Join on up... lockDisa: crset hwtimeout ; timeout option li r4,0 ; request default timeout value li r12,ILK_LOCKED ; Load bit mask b lckcomm ; Join on up... /* * unsigned int hw_lock_to(hw_lock_t, unsigned int timeout) * * Try to acquire spin-lock. Return success (1) or failure (0). * Attempt will fail after timeout ticks of the timebase. * We try fairly hard to get this lock. We disable for interruptions, but * reenable after a "short" timeout (128 ticks, we may want to change this). * After checking to see if the large timeout value (passed in) has expired and a * sufficient number of cycles have gone by (to insure pending 'rupts are taken), * we return either in abject failure, or disable and go back to the lock sniff routine. * If the sniffer finds the lock free, it jumps right up and tries to grab it. */ .align 5 .globl EXT(hw_lock_to) LEXT(hw_lock_to) crset hwtimeout ; timeout option li r12,ILK_LOCKED ; Load bit mask lckcomm: mfsprg r6,1 ; Get the current activation lwz r5,ACT_PREEMPT_CNT(r6) ; Get the preemption level addi r5,r5,1 ; Bring up the disable count stw r5,ACT_PREEMPT_CNT(r6) ; Save it back mr r5,r3 ; Get the address of the lock li r8,0 ; Set r8 to zero lcktry: lwarx r6,0,r5 ; Grab the lock value and. r3,r6,r12 ; Is it locked? or r6,r6,r12 ; Set interlock bne-- lckspin ; Yeah, wait for it to clear... stwcx. r6,0,r5 ; Try to seize that there durn lock bne-- lcktry ; Couldn't get it... li r3,1 ; return true .globl EXT(hwllckPatch_isync) LEXT(hwllckPatch_isync) isync ; Make sure we don't use a speculativily loaded value blr ; Go on home... lckspin: li r6,lgKillResv ; Get killing field stwcx. r6,0,r6 ; Kill reservation mr. r4,r4 ; Test timeout value bne++ lockspin0 lis r4,hi16(EXT(LockTimeOut)) ; Get the high part ori r4,r4,lo16(EXT(LockTimeOut)) ; And the low part lwz r4,0(r4) ; Get the timeout value lockspin0: mr. r8,r8 ; Is r8 set to zero bne++ lockspin1 ; If yes, first spin attempt lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable mfmsr r9 ; Get the MSR value ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Turn off interruptions isync ; May have turned off vec and fp here mftb r8 ; Get timestamp on entry b lcksniff lockspin1: mtmsr r7 ; Turn off interruptions mftb r8 ; Get timestamp on entry lcksniff: lwz r3,0(r5) ; Get that lock in here and. r3,r3,r12 ; Is it free yet? beq++ lckretry ; Yeah, try for it again... mftb r10 ; Time stamp us now sub r10,r10,r8 ; Get the elapsed time cmplwi r10,128 ; Have we been spinning for 128 tb ticks? blt++ lcksniff ; Not yet... mtmsr r9 ; Say, any interrupts pending? ; The following instructions force the pipeline to be interlocked to that only one ; instruction is issued per cycle. The insures that we stay enabled for a long enough ; time; if it's too short, pending interruptions will not have a chance to be taken subi r4,r4,128 ; Back off elapsed time from timeout value or r4,r4,r4 ; Do nothing here but force a single cycle delay mr. r4,r4 ; See if we used the whole timeout li r3,0 ; Assume a timeout return code or r4,r4,r4 ; Do nothing here but force a single cycle delay ble-- lckfail ; We failed b lockspin1 ; Now that we've opened an enable window, keep trying... lckretry: mtmsr r9 ; Restore interrupt state li r8,1 ; Insure that R8 is not 0 b lcktry lckfail: ; We couldn't get the lock bf hwtimeout,lckpanic li r3,0 ; Set failure return code blr ; Return, head hanging low... lckpanic: mr r4,r5 mr r5,r3 lis r3,hi16(lckpanic_str) ; Get the failed lck message ori r3,r3,lo16(lckpanic_str) ; Get the failed lck message bl EXT(panic) BREAKPOINT_TRAP ; We die here anyway .data lckpanic_str: STRINGD "timeout on attempt to acquire lock (0x%08X), value = 0x%08X\n\000" .text /* * void hw_lock_unlock(hw_lock_t) * * Unconditionally release lock. * Release preemption level. */ .align 5 .globl EXT(hw_lock_unlock) LEXT(hw_lock_unlock) .globl EXT(hwulckPatch_isync) LEXT(hwulckPatch_isync) isync .globl EXT(hwulckPatch_eieio) LEXT(hwulckPatch_eieio) eieio li r0, 0 ; set lock to free stw r0, 0(r3) b epStart ; Go enable preemption... /* * unsigned int hw_unlock_bit(hw_lock_t, unsigned int bit) * * Release bit based spin-lock. The second parameter is the bit mask to clear. * Multiple bits may be cleared. * */ .align 5 .globl EXT(hw_unlock_bit) LEXT(hw_unlock_bit) .globl EXT(hwulckbPatch_isync) LEXT(hwulckbPatch_isync) isync .globl EXT(hwulckbPatch_eieio) LEXT(hwulckbPatch_eieio) eieio ubittry: lwarx r0,0,r3 ; Grab the lock value andc r0,r0,r4 ; Clear the lock bits stwcx. r0,0,r3 ; Try to clear that there durn lock bne- ubittry ; Try again, couldn't save it... b epStart ; Go enable preemption... /* * unsigned int hw_lock_mbits(hw_lock_t, unsigned int bits, unsigned int value, * unsigned int newb, unsigned int timeout) * * Try to acquire spin-lock. The second parameter is the bit mask to check. * The third is the value of those bits and the 4th is what to set them to. * Return success (1) or failure (0). * Attempt will fail after timeout ticks of the timebase. * We try fairly hard to get this lock. We disable for interruptions, but * reenable after a "short" timeout (128 ticks, we may want to shorten this). * After checking to see if the large timeout value (passed in) has expired and a * sufficient number of cycles have gone by (to insure pending 'rupts are taken), * we return either in abject failure, or disable and go back to the lock sniff routine. * If the sniffer finds the lock free, it jumps right up and tries to grab it. */ .align 5 .globl EXT(hw_lock_mbits) LEXT(hw_lock_mbits) li r10,0 mbittry: lwarx r12,0,r3 ; Grab the lock value and r0,r12,r4 ; Clear extra bits andc r12,r12,r4 ; Clear all bits in the bit mask or r12,r12,r6 ; Turn on the lock bits cmplw r0,r5 ; Are these the right bits? bne-- mbitspin ; Nope, wait for it to clear... stwcx. r12,0,r3 ; Try to seize that there durn lock beq++ mbitgot ; We got it, yahoo... b mbittry ; Just start up again if the store failed... .align 5 mbitspin: li r11,lgKillResv ; Point to killing field stwcx. r11,0,r11 ; Kill it mr. r10,r10 ; Is r10 set to zero bne++ mbitspin0 ; If yes, first spin attempt lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable mfmsr r9 ; Get the MSR value ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r8,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r8,r9,r8 ; Clear EE as well mtmsr r8 ; Turn off interruptions isync ; May have turned off vectors or float here mftb r10 ; Get the low part of the time base b mbitsniff mbitspin0: mtmsr r8 ; Turn off interruptions mftb r10 ; Get the low part of the time base mbitsniff: lwz r12,0(r3) ; Get that lock in here and r0,r12,r4 ; Clear extra bits cmplw r0,r5 ; Are these the right bits? beq++ mbitretry ; Yeah, try for it again... mftb r11 ; Time stamp us now sub r11,r11,r10 ; Get the elapsed time cmplwi r11,128 ; Have we been spinning for 128 tb ticks? blt++ mbitsniff ; Not yet... mtmsr r9 ; Say, any interrupts pending? ; The following instructions force the pipeline to be interlocked to that only one ; instruction is issued per cycle. The insures that we stay enabled for a long enough ; time. If it is too short, pending interruptions will not have a chance to be taken subi r7,r7,128 ; Back off elapsed time from timeout value or r7,r7,r7 ; Do nothing here but force a single cycle delay mr. r7,r7 ; See if we used the whole timeout or r7,r7,r7 ; Do nothing here but force a single cycle delay ble-- mbitfail ; We failed b mbitspin0 ; Now that we have opened an enable window, keep trying... mbitretry: mtmsr r9 ; Enable for interruptions li r10,1 ; Make sure this is non-zero b mbittry .align 5 mbitgot: li r3,1 ; Set good return code .globl EXT(hwlmlckPatch_isync) LEXT(hwlmlckPatch_isync) isync ; Make sure we do not use a speculativily loaded value blr mbitfail: li r3,0 ; Set failure return code blr ; Return, head hanging low... /* * unsigned int hw_cpu_sync(unsigned int *, unsigned int timeout) * * Spin until word hits 0 or timeout. * Return success (1) or failure (0). * Attempt will fail after timeout ticks of the timebase. * * The theory is that a processor will bump a counter as it signals * other processors. Then it will spin untl the counter hits 0 (or * times out). The other processors, as it receives the signal will * decrement the counter. * * The other processors use interlocked update to decrement, this one * does not need to interlock. */ .align 5 .globl EXT(hw_cpu_sync) LEXT(hw_cpu_sync) mftb r10 ; Get the low part of the time base mr r9,r3 ; Save the sync word address li r3,1 ; Assume we work csynctry: lwz r11,0(r9) ; Grab the sync value mr. r11,r11 ; Counter hit 0? beqlr- ; Yeah, we are sunk... mftb r12 ; Time stamp us now sub r12,r12,r10 ; Get the elapsed time cmplw r4,r12 ; Have we gone too long? bge+ csynctry ; Not yet... li r3,0 ; Set failure... blr ; Return, head hanging low... /* * unsigned int hw_cpu_wcng(unsigned int *, unsigned int, unsigned int timeout) * * Spin until word changes or timeout. * Return success (1) or failure (0). * Attempt will fail after timeout ticks of the timebase. * * This is used to insure that a processor passes a certain point. * An example of use is to monitor the last interrupt time in the * per_proc block. This can be used to insure that the other processor * has seen at least one interrupt since a specific time. */ .align 5 .globl EXT(hw_cpu_wcng) LEXT(hw_cpu_wcng) mftb r10 ; Get the low part of the time base mr r9,r3 ; Save the sync word address li r3,1 ; Assume we work wcngtry: lwz r11,0(r9) ; Grab the value cmplw r11,r4 ; Do they still match? bnelr- ; Nope, cool... mftb r12 ; Time stamp us now sub r12,r12,r10 ; Get the elapsed time cmplw r5,r12 ; Have we gone too long? bge+ wcngtry ; Not yet... li r3,0 ; Set failure... blr ; Return, head hanging low... /* * unsigned int hw_lock_try(hw_lock_t) * * Try to acquire spin-lock. Return success (1) or failure (0) * Returns with preemption disabled on success. * */ .align 5 .globl EXT(hw_lock_try) LEXT(hw_lock_try) lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable mfmsr r9 ; Get the MSR value ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Disable interruptions and thus, preemption lwz r5,0(r3) ; Quick load andi. r6,r5,ILK_LOCKED ; TEST... bne-- .L_lock_try_failed ; No go... .L_lock_try_loop: lwarx r5,0,r3 ; Ld from addr of arg and reserve andi. r6,r5,ILK_LOCKED ; TEST... ori r5,r5,ILK_LOCKED bne-- .L_lock_try_failedX ; branch if taken. Predict free stwcx. r5,0,r3 ; And SET (if still reserved) bne-- .L_lock_try_loop ; If set failed, loop back .globl EXT(hwltlckPatch_isync) LEXT(hwltlckPatch_isync) isync mfsprg r6,1 ; Get current activation lwz r5,ACT_PREEMPT_CNT(r6) ; Get the preemption level addi r5,r5,1 ; Bring up the disable count stw r5,ACT_PREEMPT_CNT(r6) ; Save it back mtmsr r9 ; Allow interruptions now li r3,1 ; Set that the lock was free blr .L_lock_try_failedX: li r6,lgKillResv ; Killing field stwcx. r6,0,r6 ; Kill reservation .L_lock_try_failed: mtmsr r9 ; Allow interruptions now li r3,0 ; FAILURE - lock was taken blr /* * unsigned int hw_lock_held(hw_lock_t) * * Return 1 if lock is held * Doesn't change preemption state. * N.B. Racy, of course. */ .align 5 .globl EXT(hw_lock_held) LEXT(hw_lock_held) isync ; Make sure we don't use a speculativily fetched lock lwz r3, 0(r3) ; Get lock value andi. r6,r3,ILK_LOCKED ; Extract the ILK_LOCKED bit blr /* * uint32_t hw_compare_and_store(uint32_t oldval, uint32_t newval, uint32_t *dest) * * Compare old to area if equal, store new, and return true * else return false and no store * This is an atomic operation */ .align 5 .globl EXT(hw_compare_and_store) LEXT(hw_compare_and_store) mr r6,r3 ; Save the old value cstry: lwarx r9,0,r5 ; Grab the area value li r3,1 ; Assume it works cmplw cr0,r9,r6 ; Does it match the old value? bne-- csfail ; No, it must have changed... stwcx. r4,0,r5 ; Try to save the new value bne-- cstry ; Didn't get it, try again... .globl EXT(hwcsatomicPatch_isync) LEXT(hwcsatomicPatch_isync) isync ; Just hold up prefetch blr ; Return... csfail: li r3,lgKillResv ; Killing field stwcx. r3,0,r3 ; Blow reservation li r3,0 ; Set failure blr ; Better luck next time... /* * uint32_t hw_atomic_add(uint32_t *dest, uint32_t delt) * * Atomically add the second parameter to the first. * Returns the result. * */ .align 5 .globl EXT(hw_atomic_add) LEXT(hw_atomic_add) mr r6,r3 ; Save the area addtry: lwarx r3,0,r6 ; Grab the area value add r3,r3,r4 ; Add the value stwcx. r3,0,r6 ; Try to save the new value bne-- addtry ; Didn't get it, try again... blr ; Return... /* * uint32_t hw_atomic_sub(uint32_t *dest, uint32_t delt) * * Atomically subtract the second parameter from the first. * Returns the result. * */ .align 5 .globl EXT(hw_atomic_sub) LEXT(hw_atomic_sub) mr r6,r3 ; Save the area subtry: lwarx r3,0,r6 ; Grab the area value sub r3,r3,r4 ; Subtract the value stwcx. r3,0,r6 ; Try to save the new value bne-- subtry ; Didn't get it, try again... blr ; Return... /* * uint32_t hw_atomic_or(uint32_t *dest, uint32_t mask) * * Atomically ORs the second parameter into the first. * Returns the result. */ .align 5 .globl EXT(hw_atomic_or) LEXT(hw_atomic_or) mr r6,r3 ; Save the area ortry: lwarx r3,0,r6 ; Grab the area value or r3,r3,r4 ; OR the value stwcx. r3,0,r6 ; Try to save the new value bne-- ortry ; Did not get it, try again... blr ; Return... /* * uint32_t hw_atomic_and(uint32_t *dest, uint32_t mask) * * Atomically ANDs the second parameter with the first. * Returns the result. * */ .align 5 .globl EXT(hw_atomic_and) LEXT(hw_atomic_and) mr r6,r3 ; Save the area andtry: lwarx r3,0,r6 ; Grab the area value and r3,r3,r4 ; AND the value stwcx. r3,0,r6 ; Try to save the new value bne-- andtry ; Did not get it, try again... blr ; Return... /* * void hw_queue_atomic(unsigned int * anchor, unsigned int * elem, unsigned int disp) * * Atomically inserts the element at the head of the list * anchor is the pointer to the first element * element is the pointer to the element to insert * disp is the displacement into the element to the chain pointer * * NOTE: OSEnqueueAtomic() is aliased to this, see xnu/libkern/Makefile */ .align 5 .globl EXT(hw_queue_atomic) LEXT(hw_queue_atomic) mr r7,r4 ; Make end point the same as start mr r8,r5 ; Copy the displacement also b hw_queue_comm ; Join common code... /* * void hw_queue_atomic_list(unsigned int * anchor, unsigned int * first, unsigned int * last, unsigned int disp) * * Atomically inserts the list of elements at the head of the list * anchor is the pointer to the first element * first is the pointer to the first element to insert * last is the pointer to the last element to insert * disp is the displacement into the element to the chain pointer */ .align 5 .globl EXT(hw_queue_atomic_list) LEXT(hw_queue_atomic_list) mr r7,r5 ; Make end point the same as start mr r8,r6 ; Copy the displacement also hw_queue_comm: lwarx r9,0,r3 ; Pick up the anchor stwx r9,r8,r7 ; Chain that to the end of the new stuff eieio ; Make sure this store makes it before the anchor update stwcx. r4,0,r3 ; Try to chain into the front bne-- hw_queue_comm ; Didn't make it, try again... blr ; Return... /* * unsigned int *hw_dequeue_atomic(unsigned int *anchor, unsigned int disp) * * Atomically removes the first element in a list and returns it. * anchor is the pointer to the first element * disp is the displacement into the element to the chain pointer * Returns element if found, 0 if empty. * * NOTE: OSDequeueAtomic() is aliased to this, see xnu/libkern/Makefile */ .align 5 .globl EXT(hw_dequeue_atomic) LEXT(hw_dequeue_atomic) mr r5,r3 ; Save the anchor hw_dequeue_comm: lwarx r3,0,r5 ; Pick up the anchor mr. r3,r3 ; Is the list empty? beq-- hdcFail ; Leave it list empty... lwzx r9,r4,r3 ; Get the next in line stwcx. r9,0,r5 ; Try to chain into the front beqlr++ ; Got the thing, go away with it... b hw_dequeue_comm ; Did not make it, try again... hdcFail: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Dump reservation blr ; Leave... /* * Routines for mutex lock debugging. */ /* * Gets lock check flags in CR6: CR bits 24-27 */ #define CHECK_SETUP(rg) \ lbz rg,lglcksWork(0) __ASMNL__ \ mtcrf 2,rg __ASMNL__ /* * Checks for expected lock type. */ #define CHECK_MUTEX_TYPE() \ bf MUTEX_ATTR_DEBUGb,1f __ASMNL__ \ bt 24+disLktypeb,1f __ASMNL__ \ lwz r10,MUTEX_TYPE(r3) __ASMNL__ \ cmpwi r10,MUTEX_TAG __ASMNL__ \ beq++ 1f __ASMNL__ \ PROLOG(0) __ASMNL__ \ mr r4,r11 __ASMNL__ \ mr r5,r10 __ASMNL__ \ lis r3,hi16(not_a_mutex) __ASMNL__ \ ori r3,r3,lo16(not_a_mutex) __ASMNL__ \ bl EXT(panic) __ASMNL__ \ BREAKPOINT_TRAP __ASMNL__ \ 1: .data not_a_mutex: STRINGD "mutex (0x%08X) not a mutex type (0x%08X)\n\000" .text /* * Verifies return to the correct thread in "unlock" situations. */ #define CHECK_THREAD(thread_offset) \ bf MUTEX_ATTR_DEBUGb,3f __ASMNL__ \ bt 24+disLkThreadb,3f __ASMNL__ \ mfsprg r10,1 __ASMNL__ \ lwz r5,MUTEX_DATA(r3) __ASMNL__ \ rlwinm. r9,r5,0,0,29 __ASMNL__ \ bne++ 1f __ASMNL__ \ lis r3,hi16(not_held) __ASMNL__ \ ori r3,r3,lo16(not_held) __ASMNL__ \ b 2f __ASMNL__ \ 1: __ASMNL__ \ cmpw r9,r10 __ASMNL__ \ beq++ 3f __ASMNL__ \ mr r5,r10 __ASMNL__ \ mr r6,r9 __ASMNL__ \ lis r3,hi16(wrong_thread) __ASMNL__ \ ori r3,r3,lo16(wrong_thread) __ASMNL__ \ 2: __ASMNL__ \ mr r4,r11 __ASMNL__ \ PROLOG(0) __ASMNL__ \ bl EXT(panic) __ASMNL__ \ BREAKPOINT_TRAP __ASMNL__ \ 3: .data not_held: STRINGD "mutex (0x%08X) not held\n\000" wrong_thread: STRINGD "mutex (0x%08X) unlocked by non-owner(0x%08X), current owner(0x%08X)\n\000" .text #define CHECK_MYLOCK() \ bf MUTEX_ATTR_DEBUGb,1f __ASMNL__ \ bt 24+disLkMyLckb,1f __ASMNL__ \ mfsprg r10,1 __ASMNL__ \ lwz r9,MUTEX_DATA(r3) __ASMNL__ \ rlwinm r9,r9,0,0,29 __ASMNL__ \ cmpw r9,r10 __ASMNL__ \ bne++ 1f __ASMNL__ \ mr r4,r11 __ASMNL__ \ lis r3, hi16(mylock_attempt) __ASMNL__ \ ori r3,r3,lo16(mylock_attempt) __ASMNL__ \ bl EXT(panic) __ASMNL__ \ BREAKPOINT_TRAP __ASMNL__ \ 1: .data mylock_attempt: STRINGD "mutex (0x%08X) recursive lock attempt\n\000" .text #define LCK_STACK(lck, stack, lck_stack, frame_cnt, lr_save, tmp) \ bf 24+enaLkExtStckb,3f __ASMNL__ \ addi lck_stack,lck,MUTEX_STACK __ASMNL__ \ li frame_cnt,MUTEX_FRAMES-1 __ASMNL__ \ 1: __ASMNL__ \ mr tmp,stack __ASMNL__ \ lwz stack,0(stack) __ASMNL__ \ xor tmp,stack,tmp __ASMNL__ \ cmplwi tmp,8192 __ASMNL__ \ bge-- 2f __ASMNL__ \ lwz lr_save,FM_LR_SAVE(stack) __ASMNL__ \ stwu lr_save,4(lck_stack) __ASMNL__ \ subi frame_cnt,frame_cnt,1 __ASMNL__ \ cmpi cr0,frame_cnt,0 __ASMNL__ \ bne 1b __ASMNL__ \ b 3f __ASMNL__ \ 2: __ASMNL__ \ li tmp,0 __ASMNL__ \ stwu tmp,4(lck_stack) __ASMNL__ \ subi frame_cnt,frame_cnt,1 __ASMNL__ \ cmpi cr0,frame_cnt,0 __ASMNL__ \ bne 2b __ASMNL__ \ 3: /* * void mutex_init(mutex_t* l, etap_event_t etap) * */ .align 5 .globl EXT(mutex_init) LEXT(mutex_init) PROLOG(0) li r10,0 stw r10,MUTEX_DATA(r3) ; clear lock word sth r10,MUTEX_WAITERS(r3) ; init waiter count sth r10,MUTEX_PROMOTED_PRI(r3) #if MACH_LDEBUG li r11,MUTEX_ATTR_DEBUG stw r10,MUTEX_STACK(r3) ; init caller pc stw r10,MUTEX_THREAD(r3) ; and owning thread li r9, MUTEX_TAG stw r9, MUTEX_TYPE(r3) ; set lock type stw r11,MUTEX_ATTR(r3) addi r8,r3,MUTEX_STACK-4 li r9,MUTEX_FRAMES mlistck: stwu r10,4(r8) ; init stack subi r9,r9,1 cmpi cr0,r9,0 bne mlistck #endif /* MACH_LDEBUG */ EPILOG blr /* * void lck_mtx_lock_ext(lck_mtx_ext_t*) * */ .align 5 .globl EXT(lck_mtx_lock_ext) LEXT(lck_mtx_lock_ext) #if MACH_LDEBUG .globl EXT(mutex_lock) LEXT(mutex_lock) .globl EXT(_mutex_lock) LEXT(_mutex_lock) #endif mr r11,r3 ; Save lock addr mlckeEnter: lwz r0,MUTEX_ATTR(r3) mtcrf 1,r0 ; Set cr7 CHECK_SETUP(r12) CHECK_MUTEX_TYPE() bf MUTEX_ATTR_DEBUGb,L_mutex_lock_assert_wait_2 PROLOG(0) bl EXT(assert_wait_possible) mr. r3,r3 bne L_mutex_lock_assert_wait_1 lis r3,hi16(L_mutex_lock_assert_wait_panic_str) ori r3,r3,lo16(L_mutex_lock_assert_wait_panic_str) bl EXT(panic) BREAKPOINT_TRAP ; We die here anyway .data L_mutex_lock_assert_wait_panic_str: STRINGD "mutex lock attempt with assert_wait_possible false\n\000" .text L_mutex_lock_assert_wait_1: lwz r3,FM_ARG0(r1) lwz r11,FM_ARG0+0x04(r1) lwz r2,(FM_ALIGN(0)+FM_SIZE+FM_CR_SAVE)(r1) mtcr r2 EPILOG L_mutex_lock_assert_wait_2: mfsprg r6,1 ; load the current thread bf MUTEX_ATTR_STATb,mlckestatskip ; Branch if no stat lwz r5,MUTEX_GRP(r3) ; Load lock group li r7,GRP_MTX_STAT_UTIL+4 ; Set stat util offset mlckestatloop: lwarx r8,r7,r5 ; Load stat util cnt addi r8,r8,1 ; Increment stat util cnt stwcx. r8,r7,r5 ; Store stat util cnt bne-- mlckestatloop ; Retry if failed mr. r8,r8 ; Test for zero bne++ mlckestatskip ; Did stat util cnt wrapped? lwz r8,GRP_MTX_STAT_UTIL(r5) ; Load upper stat util cnt addi r8,r8,1 ; Increment upper stat util cnt stw r8,GRP_MTX_STAT_UTIL(r5) ; Store upper stat util cnt mlckestatskip: lwz r5,MUTEX_DATA(r3) ; Get the lock quickly li r4,0 li r8,0 lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable mfmsr r9 ; Get the MSR value ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Turn off interruptions isync ; May have turned off vec and fp here mr. r5,r5 ; Quick check bne-- mlckespin01 ; Can not get it right now... mlcketry: lwarx r5,MUTEX_DATA,r3 ; load the mutex lock mr. r5,r5 bne-- mlckespin0 ; Can not get it right now... stwcx. r6,MUTEX_DATA,r3 ; grab the lock bne-- mlcketry ; loop back if failed .globl EXT(mlckePatch_isync) LEXT(mlckePatch_isync) isync ; stop prefeteching mflr r12 bf MUTEX_ATTR_DEBUGb,mlckedebskip mr r8,r6 ; Get the active thread stw r12,MUTEX_STACK(r3) ; Save our caller stw r8,MUTEX_THREAD(r3) ; Set the mutex's holding thread mr r5,r1 LCK_STACK(r3,r5,r6,r7,r8,r10) mlckedebskip: mtmsr r9 ; Say, any interrupts pending? blr mlckespin0: li r5,lgKillResv ; Killing field stwcx. r5,0,r5 ; Kill reservation mlckespin01: mflr r12 mtmsr r9 ; Say, any interrupts pending? bl mlckspin1 mtmsr r7 ; Turn off interruptions, vec and fp off already mtlr r12 b mlcketry /* * void lck_mtx_lock(lck_mtx_t*) * */ .align 5 .globl EXT(lck_mtx_lock) LEXT(lck_mtx_lock) #if !MACH_LDEBUG .globl EXT(mutex_lock) LEXT(mutex_lock) .globl EXT(_mutex_lock) LEXT(_mutex_lock) #endif mfsprg r6,1 ; load the current thread lwz r5,MUTEX_DATA(r3) ; Get the lock quickly mr r11,r3 ; Save lock addr li r4,0 li r8,0 li r9,0 mr. r5,r5 ; Quick check bne-- mlckspin00 ; Indirect or Can not get it right now... mlcktry: lwarx r5,MUTEX_DATA,r3 ; load the mutex lock mr. r5,r5 bne-- mlckspin01 ; Can not get it right now... stwcx. r6,MUTEX_DATA,r3 ; grab the lock bne-- mlcktry ; loop back if failed .globl EXT(mlckPatch_isync) LEXT(mlckPatch_isync) isync ; stop prefeteching blr mlckspin00: cmpli cr0,r5,MUTEX_IND ; Is it a mutex indirect bne-- mlckspin02 ; No, go handle contention lwz r3,MUTEX_PTR(r3) ; load mutex ext pointer b mlckeEnter mlckspin01: li r5,lgKillResv ; Killing field stwcx. r5,0,r5 ; Kill reservation mlckspin02: mflr r12 li r0,0 mtcrf 1,r0 ; Set cr7 to zero bl mlckspin1 mtlr r12 b mlcktry mlckspin1: mr. r4,r4 ; Test timeout value bne++ mlckspin2 lis r4,hi16(EXT(MutexSpin)) ; Get the high part ori r4,r4,lo16(EXT(MutexSpin) ) ; And the low part lwz r4,0(r4) ; Get spin timerout value mr. r4,r4 ; Test spin timeout value bne++ mlckspin2 ; Is spin timeout requested crclr mlckmiss ; Clear miss test b mlckslow1 ; Don't try to spin mlckspin2: mr. r8,r8 ; Is r8 set to zero bne++ mlckspin3 ; If yes, first spin attempt crclr mlckmiss ; Clear miss test mr. r9,r9 ; Is r9 set to zero bne++ mlckspin3 ; If yes, r9 set with msr value lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable mfmsr r9 ; Get the MSR value ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Turn off interruptions isync ; May have turned off vec and fp here mftb r8 ; Get timestamp on entry b mlcksniff mlckspin3: mtmsr r7 ; Turn off interruptions mftb r8 ; Get timestamp on entry mlcksniff: lwz r5,MUTEX_DATA(r3) ; Get that lock in here mr. r5,r5 ; Is the lock held beq++ mlckretry ; No, try for it again... rlwinm. r10,r5,0,0,29 ; Extract the lock owner beq++ mlckslow0 ; InterLock is held bf MUTEX_ATTR_STATb,mlStatSkip ; Branch if no stat andi. r5,r5,ILK_LOCKED ; extract interlocked? bne mlStatSkip ; yes, skip bt mlckmiss,mlStatSkip ; miss already counted crset mlckmiss ; Remember miss recorded lwz r5,MUTEX_GRP(r3) ; Load lock group addi r5,r5,GRP_MTX_STAT_MISS+4 ; Add stat miss offset mlStatLoop: lwarx r6,0,r5 ; Load stat miss cnt addi r6,r6,1 ; Increment stat miss cnt stwcx. r6,0,r5 ; Update stat miss cnt bne-- mlStatLoop ; Retry if failed mfsprg r6,1 ; Reload current thread mlStatSkip: lwz r2,ACT_MACT_SPF(r10) ; Get the special flags rlwinm. r2,r2,0,OnProcbit,OnProcbit ; Is OnProcbit set? beq mlckslow0 ; Lock owner isn't running lis r2,hi16(TH_OPT_DELAYIDLE) ; Get DelayedIdle Option ori r2,r2,lo16(TH_OPT_DELAYIDLE) ; Get DelayedIdle Option lwz r10,THREAD_OPTIONS(r10) ; Get the thread options and. r10,r10,r2 ; Is DelayedIdle set? bne mlckslow0 ; Lock owner is in delay idle mftb r10 ; Time stamp us now sub r10,r10,r8 ; Get the elapsed time cmplwi r10,128 ; Have we been spinning for 128 tb ticks? blt++ mlcksniff ; Not yet... mtmsr r9 ; Say, any interrupts pending? ; The following instructions force the pipeline to be interlocked to that only one ; instruction is issued per cycle. The insures that we stay enabled for a long enough ; time; if it's too short, pending interruptions will not have a chance to be taken subi r4,r4,128 ; Back off elapsed time from timeout value or r4,r4,r4 ; Do nothing here but force a single cycle delay mr. r4,r4 ; See if we used the whole timeout or r4,r4,r4 ; Do nothing here but force a single cycle delay ble-- mlckslow1 ; We failed b mlckspin3 ; Now that we've opened an enable window, keep trying... mlckretry: mtmsr r9 ; Restore interrupt state li r8,1 ; Show already through once blr mlckslow0: ; We couldn't get the lock mtmsr r9 ; Restore interrupt state mlckslow1: mtlr r12 PROLOG(0) .L_ml_retry: bl lockDisa ; Go get a lock on the mutex's interlock lock mr. r4,r3 ; Did we get it? lwz r3,FM_ARG0(r1) ; Restore the lock address bne++ mlGotInt ; We got it just fine... mr r4,r11 ; Saved lock addr lis r3,hi16(mutex_failed1) ; Get the failed mutex message ori r3,r3,lo16(mutex_failed1) ; Get the failed mutex message bl EXT(panic) ; Call panic BREAKPOINT_TRAP ; We die here anyway, can not get the lock .data mutex_failed1: STRINGD "attempt to interlock mutex (0x%08X) failed on mutex lock\n\000" .text mlGotInt: ; Note that there is no reason to do a load and reserve here. We already ; hold the interlock lock and no one can touch this field unless they ; have that, so, we're free to play lwz r4,MUTEX_DATA(r3) ; Get the mutex's lock field rlwinm. r9,r4,30,2,31 ; So, can we have it? bne- mlInUse ; Nope, sombody's playing already... bf++ MUTEX_ATTR_DEBUGb,mlDebSkip CHECK_SETUP(r5) mfsprg r9,1 ; Get the current activation lwz r5,0(r1) ; Get previous save frame lwz r6,FM_LR_SAVE(r5) ; Get our caller's address mr r8,r9 ; Get the active thread stw r6,MUTEX_STACK(r3) ; Save our caller stw r8,MUTEX_THREAD(r3) ; Set the mutex's holding thread LCK_STACK(r3,r5,r6,r7,r8,r10) mlDebSkip: mr r3,r11 ; Get the based lock address bl EXT(lck_mtx_lock_acquire) lwz r2,(FM_ALIGN(0)+FM_SIZE+FM_CR_SAVE)(r1) mfsprg r5,1 mtcr r2 mr. r4,r3 lwz r3,FM_ARG0(r1) ; restore r3 (saved in prolog) lwz r11,FM_ARG0+0x04(r1) ; restore r11 (saved in prolog) beq mlUnlock ori r5,r5,WAIT_FLAG mlUnlock: eieio stw r5,MUTEX_DATA(r3) ; grab the mutexlock and free the interlock EPILOG ; Restore all saved registers b epStart ; Go enable preemption... ; We come to here when we have a resource conflict. In other words, ; the mutex is held. mlInUse: CHECK_SETUP(r12) CHECK_MYLOCK() ; Assert we don't own the lock already */ ; Note that we come in here with the interlock set. The wait routine ; will unlock it before waiting. bf MUTEX_ATTR_STATb,mlStatSkip2 ; Branch if no stat lwz r5,MUTEX_GRP(r3) ; Load lck group bt mlckmiss,mlStatSkip1 ; Skip miss already counted crset mlckmiss ; Remember miss recorded li r9,GRP_MTX_STAT_MISS+4 ; Get stat miss offset mlStatLoop1: lwarx r8,r9,r5 ; Load stat miss cnt addi r8,r8,1 ; Increment stat miss cnt stwcx. r8,r9,r5 ; Store stat miss cnt bne-- mlStatLoop1 ; Retry if failed mlStatSkip1: lwz r9,GRP_MTX_STAT_WAIT+4(r5) ; Load wait cnt addi r9,r9,1 ; Increment wait cnt stw r9,GRP_MTX_STAT_WAIT+4(r5) ; Update miss cnt mlStatSkip2: ori r4,r4,WAIT_FLAG ; Set the wait flag stw r4,MUTEX_DATA(r3) rlwinm r4,r4,0,0,29 ; Extract the lock owner mfcr r2 stw r2,(FM_ALIGN(0)+FM_SIZE+FM_CR_SAVE)(r1) mr r3,r11 ; Get the based lock address bl EXT(lck_mtx_lock_wait) ; Wait for our turn at the lock lwz r3,FM_ARG0(r1) ; restore r3 (saved in prolog) lwz r11,FM_ARG0+0x04(r1) ; restore r11 (saved in prolog) lwz r2,(FM_ALIGN(0)+FM_SIZE+FM_CR_SAVE)(r1) mtcr r2 b .L_ml_retry ; and try again... /* * void lck_mtx_try_lock(_extlck_mtx_ext_t*) * */ .align 5 .globl EXT(lck_mtx_try_lock_ext) LEXT(lck_mtx_try_lock_ext) #if MACH_LDEBUG .globl EXT(mutex_try) LEXT(mutex_try) .globl EXT(_mutex_try) LEXT(_mutex_try) #endif mr r11,r3 ; Save lock addr mlteEnter: lwz r0,MUTEX_ATTR(r3) mtcrf 1,r0 ; Set cr7 CHECK_SETUP(r12) CHECK_MUTEX_TYPE() bf MUTEX_ATTR_STATb,mlteStatSkip ; Branch if no stat lwz r5,MUTEX_GRP(r3) ; Load lock group li r7,GRP_MTX_STAT_UTIL+4 ; Set stat util offset mlteStatLoop: lwarx r8,r7,r5 ; Load stat util cnt addi r8,r8,1 ; Increment stat util cnt stwcx. r8,r7,r5 ; Store stat util cnt bne-- mlteStatLoop ; Retry if failed mr. r8,r8 ; Test for zero bne++ mlteStatSkip ; Did stat util cnt wrapped? lwz r8,GRP_MTX_STAT_UTIL(r5) ; Load upper stat util cnt addi r8,r8,1 ; Increment upper stat util cnt stw r8,GRP_MTX_STAT_UTIL(r5) ; Store upper stat util cnt mlteStatSkip: mfsprg r6,1 ; load the current thread lwz r5,MUTEX_DATA(r3) ; Get the lock value mr. r5,r5 ; Quick check bne-- L_mutex_try_slow ; Can not get it now... mfmsr r9 ; Get the MSR value lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Turn off interruptions isync ; May have turned off vec and fp here mlteLoopTry: lwarx r5,MUTEX_DATA,r3 ; load the lock value mr. r5,r5 bne-- mlteSlowX ; branch to the slow path stwcx. r6,MUTEX_DATA,r3 ; grab the lock bne-- mlteLoopTry ; retry if failed .globl EXT(mltelckPatch_isync) LEXT(mltelckPatch_isync) isync ; stop prefetching mflr r12 bf MUTEX_ATTR_DEBUGb,mlteDebSkip mr r8,r6 ; Get the active thread stw r12,MUTEX_STACK(r3) ; Save our caller stw r8,MUTEX_THREAD(r3) ; Set the mutex's holding thread mr r5,r1 LCK_STACK(r3,r5,r6,r7,r8,r10) mlteDebSkip: li r3, 1 mtmsr r9 ; Say, any interrupts pending? blr mlteSlowX: li r5,lgKillResv ; Killing field stwcx. r5,0,r5 ; Kill reservation mtmsr r9 ; Say, any interrupts pending? b L_mutex_try_slow /* * void lck_mtx_try_lock(lck_mtx_t*) * */ .align 5 .globl EXT(lck_mtx_try_lock) LEXT(lck_mtx_try_lock) #if !MACH_LDEBUG .globl EXT(mutex_try) LEXT(mutex_try) .globl EXT(_mutex_try) LEXT(_mutex_try) #endif mfsprg r6,1 ; load the current thread lwz r5,MUTEX_DATA(r3) ; Get the lock value mr r11,r3 ; Save lock addr mr. r5,r5 ; Quick check bne-- mltSlow00 ; Indirect or Can not get it now... mltLoopTry: lwarx r5,MUTEX_DATA,r3 ; load the lock value mr. r5,r5 bne-- mltSlow01 ; branch to the slow path stwcx. r6,MUTEX_DATA,r3 ; grab the lock bne-- mltLoopTry ; retry if failed .globl EXT(mltlckPatch_isync) LEXT(mltlckPatch_isync) isync ; stop prefetching li r3, 1 blr mltSlow00: cmpli cr0,r5,MUTEX_IND ; Is it a mutex indirect bne-- mltSlow02 ; No, go handle contention lwz r3,MUTEX_PTR(r3) ; load mutex ext pointer b mlteEnter mltSlow01: li r5,lgKillResv ; Killing field stwcx. r5,0,r5 ; Kill reservation mltSlow02: li r0,0 mtcrf 1,r0 ; Set cr7 to zero L_mutex_try_slow: PROLOG(0) lwz r6,MUTEX_DATA(r3) ; Quick check rlwinm. r6,r6,30,2,31 ; to see if someone has this lock already bne- mtFail ; Someone's got it already... bl lockDisa ; Go get a lock on the mutex's interlock lock mr. r4,r3 ; Did we get it? lwz r3,FM_ARG0(r1) ; Restore the lock address bne++ mtGotInt ; We got it just fine... mr r4,r11 ; Saved lock addr lis r3,hi16(mutex_failed2) ; Get the failed mutex message ori r3,r3,lo16(mutex_failed2) ; Get the failed mutex message bl EXT(panic) ; Call panic BREAKPOINT_TRAP ; We die here anyway, can not get the lock .data mutex_failed2: STRINGD "attempt to interlock mutex (0x%08X) failed on mutex lock try\n\000" .text mtGotInt: ; Note that there is no reason to do a load and reserve here. We already ; hold the interlock and no one can touch at this field unless they ; have that, so, we're free to play lwz r4,MUTEX_DATA(r3) ; Get the mutex's lock field rlwinm. r9,r4,30,2,31 ; So, can we have it? bne- mtInUse ; Nope, sombody's playing already... bf++ MUTEX_ATTR_DEBUGb,mtDebSkip CHECK_SETUP(r5) mfsprg r9,1 ; Get the current activation lwz r5,0(r1) ; Get previous save frame lwz r6,FM_LR_SAVE(r5) ; Get our caller's address mr r8,r9 ; Get the active thread stw r6,MUTEX_STACK(r3) ; Save our caller stw r8,MUTEX_THREAD(r3) ; Set the mutex's holding thread LCK_STACK(r3,r5,r6,r7,r8,r10) mtDebSkip: mr r3,r11 ; Get the based lock address bl EXT(lck_mtx_lock_acquire) mfsprg r5,1 mr. r4,r3 lwz r3,FM_ARG0(r1) ; restore r3 (saved in prolog) lwz r11,FM_ARG0+0x04(r1) ; restore r11 (saved in prolog) beq mtUnlock ori r5,r5,WAIT_FLAG mtUnlock: eieio stw r5,MUTEX_DATA(r3) ; grab the mutexlock and free the interlock bl epStart ; Go enable preemption... li r3, 1 EPILOG ; Restore all saved registers blr ; Return... ; We come to here when we have a resource conflict. In other words, ; the mutex is held. mtInUse: bf++ MUTEX_ATTR_STATb,mtStatSkip ; Branch if no stat lwz r5,MUTEX_GRP(r3) ; Load lock group li r9,GRP_MTX_STAT_MISS+4 ; Get stat miss offset mtStatLoop: lwarx r8,r9,r5 ; Load stat miss cnt addi r8,r8,1 ; Increment stat miss cnt stwcx. r8,r9,r5 ; Store stat miss cnt bne-- mtStatLoop ; Retry if failed mtStatSkip: rlwinm r4,r4,0,0,30 ; Get the unlock value stw r4,MUTEX_DATA(r3) ; free the interlock bl epStart ; Go enable preemption... mtFail: li r3,0 ; Set failure code EPILOG ; Restore all saved registers blr ; Return... /* * void mutex_unlock(mutex_t* l) * */ .align 5 .globl EXT(mutex_unlock) LEXT(mutex_unlock) sync mr r11,r3 ; Save lock addr #if MACH_LDEBUG b mlueEnter1 #else b mluEnter1 #endif /* * void lck_mtx_ext_unlock(lck_mtx_ext_t* l) * */ .align 5 .globl EXT(lck_mtx_ext_unlock) LEXT(lck_mtx_ext_unlock) #if MACH_LDEBUG .globl EXT(mutex_unlock_rwcmb) LEXT(mutex_unlock_rwcmb) #endif mlueEnter: .globl EXT(mulckePatch_isync) LEXT(mulckePatch_isync) isync .globl EXT(mulckePatch_eieio) LEXT(mulckePatch_eieio) eieio mr r11,r3 ; Save lock addr mlueEnter1: lwz r0,MUTEX_ATTR(r3) mtcrf 1,r0 ; Set cr7 CHECK_SETUP(r12) CHECK_MUTEX_TYPE() CHECK_THREAD(MUTEX_THREAD) lwz r5,MUTEX_DATA(r3) ; Get the lock rlwinm. r4,r5,0,30,31 ; Quick check bne-- L_mutex_unlock_slow ; Can not get it now... mfmsr r9 ; Get the MSR value lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Turn off interruptions isync ; May have turned off vec and fp here mlueLoop: lwarx r5,MUTEX_DATA,r3 rlwinm. r4,r5,0,30,31 ; Bail if pending waiter or interlock set li r5,0 ; Clear the mutexlock bne-- mlueSlowX stwcx. r5,MUTEX_DATA,r3 bne-- mlueLoop mtmsr r9 ; Say, any interrupts pending? blr mlueSlowX: li r5,lgKillResv ; Killing field stwcx. r5,0,r5 ; Dump reservation mtmsr r9 ; Say, any interrupts pending? b L_mutex_unlock_slow ; Join slow path... /* * void lck_mtx_unlock(lck_mtx_t* l) * */ .align 5 .globl EXT(lck_mtx_unlock) LEXT(lck_mtx_unlock) #if !MACH_LDEBUG .globl EXT(mutex_unlock_rwcmb) LEXT(mutex_unlock_rwcmb) #endif mluEnter: .globl EXT(mulckPatch_isync) LEXT(mulckPatch_isync) isync .globl EXT(mulckPatch_eieio) LEXT(mulckPatch_eieio) eieio mr r11,r3 ; Save lock addr mluEnter1: lwz r5,MUTEX_DATA(r3) ; Get the lock rlwinm. r4,r5,0,30,31 ; Quick check bne-- mluSlow0 ; Indirect or Can not get it now... mluLoop: lwarx r5,MUTEX_DATA,r3 rlwinm. r4,r5,0,30,31 ; Bail if pending waiter or interlock set li r5,0 ; Clear the mutexlock bne-- mluSlowX stwcx. r5,MUTEX_DATA,r3 bne-- mluLoop blr mluSlow0: cmpli cr0,r5,MUTEX_IND ; Is it a mutex indirect bne-- L_mutex_unlock_slow ; No, go handle contention lwz r3,MUTEX_PTR(r3) ; load mutex ext pointer b mlueEnter1 mluSlowX: li r5,lgKillResv ; Killing field stwcx. r5,0,r5 ; Dump reservation L_mutex_unlock_slow: PROLOG(0) bl lockDisa ; Go get a lock on the mutex's interlock lock mr. r4,r3 ; Did we get it? lwz r3,FM_ARG0(r1) ; Restore the lock address bne++ muGotInt ; We got it just fine... mr r4,r11 ; Saved lock addr lis r3,hi16(mutex_failed3) ; Get the failed mutex message ori r3,r3,lo16(mutex_failed3) ; Get the failed mutex message bl EXT(panic) ; Call panic BREAKPOINT_TRAP ; We die here anyway, can not get the lock .data mutex_failed3: STRINGD "attempt to interlock mutex (0x%08X) failed on mutex unlock\n\000" .text muGotInt: lwz r4,MUTEX_DATA(r3) andi. r5,r4,WAIT_FLAG ; are there any waiters ? rlwinm r4,r4,0,0,29 beq+ muUnlock ; Nope, we're done... mr r3,r11 ; Get the based lock address bl EXT(lck_mtx_unlock_wakeup) ; yes, wake a thread lwz r3,FM_ARG0(r1) ; restore r3 (saved in prolog) lwz r11,FM_ARG0+0x04(r1) ; restore r11 (saved in prolog) lwz r5,MUTEX_DATA(r3) ; load the lock muUnlock: andi. r5,r5,WAIT_FLAG ; Get the unlock value eieio stw r5,MUTEX_DATA(r3) ; unlock the interlock and lock EPILOG ; Deal with the stack now, enable_preemption doesn't always want one b epStart ; Go enable preemption... /* * void lck_mtx_assert(lck_mtx_t* l, unsigned int) * */ .align 5 .globl EXT(lck_mtx_assert) LEXT(lck_mtx_assert) .globl EXT(_mutex_assert) LEXT(_mutex_assert) mr r11,r3 maEnter: lwz r5,MUTEX_DATA(r3) cmpli cr0,r5,MUTEX_IND ; Is it a mutex indirect bne-- maCheck ; No, go check the assertion lwz r3,MUTEX_PTR(r3) ; load mutex ext pointer b maEnter maCheck: mfsprg r6,1 ; load the current thread rlwinm r5,r5,0,0,29 ; Extract the lock owner cmpwi r4,MUTEX_ASSERT_OWNED cmplw cr1,r6,r5 ; Is the lock held by current act crandc cr0_eq,cr0_eq,cr1_eq ; Check owned assertion bne-- maNext mr r4,r11 lis r3,hi16(mutex_assert1) ; Get the failed mutex message ori r3,r3,lo16(mutex_assert1) ; Get the failed mutex message b maPanic ; Panic path maNext: cmpwi r4,MUTEX_ASSERT_NOTOWNED ; Check not owned assertion crand cr0_eq,cr0_eq,cr1_eq ; bnelr++ maPanic: PROLOG(0) mr r4,r11 lis r3,hi16(mutex_assert2) ; Get the failed mutex message ori r3,r3,lo16(mutex_assert2) ; Get the failed mutex message bl EXT(panic) ; Call panic BREAKPOINT_TRAP ; We die here anyway .data mutex_assert1: STRINGD "mutex (0x%08X) not owned\n\000" mutex_assert2: STRINGD "mutex (0x%08X) owned\n\000" .text /* * void lck_mtx_ilk_unlock(lck_mtx *lock) */ .globl EXT(lck_mtx_ilk_unlock) LEXT(lck_mtx_ilk_unlock) lwz r10,MUTEX_DATA(r3) rlwinm r10,r10,0,0,30 eieio stw r10,MUTEX_DATA(r3) b epStart ; Go enable preemption... /* * void _enable_preemption_no_check(void) * * This version does not check if we get preempted or not */ .align 4 .globl EXT(_enable_preemption_no_check) LEXT(_enable_preemption_no_check) cmplw cr1,r1,r1 ; Force zero cr so we know not to check if preempted b epCommn ; Join up with the other enable code... /* * void _enable_preemption(void) * * This version checks if we get preempted or not */ .align 5 .globl EXT(_enable_preemption) LEXT(_enable_preemption) ; Here is where we enable preemption. epStart: cmplwi cr1,r1,0 ; Force non-zero cr so we know to check if preempted epCommn: mfsprg r3,1 ; Get current activation li r8,-1 ; Get a decrementer lwz r5,ACT_PREEMPT_CNT(r3) ; Get the preemption level add. r5,r5,r8 ; Bring down the disable count blt- epTooFar ; Yeah, we did... stw r5,ACT_PREEMPT_CNT(r3) ; Save it back crandc cr0_eq,cr0_eq,cr1_eq beq+ epCheckPreempt ; Go check if we need to be preempted... blr ; Leave... epTooFar: mr r4,r5 lis r3,hi16(epTooFarStr) ; First half of panic string ori r3,r3,lo16(epTooFarStr) ; Second half of panic string PROLOG(0) bl EXT(panic) BREAKPOINT_TRAP ; We die here anyway .data epTooFarStr: STRINGD "enable_preemption: preemption_level %d\n\000" .text .align 5 epCheckPreempt: lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable mfmsr r9 ; Get the MSR value ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable andi. r4,r9,lo16(MASK(MSR_EE)) ; We cannot preempt if interruptions are off beq+ epCPno ; No preemption here... ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Turn off interruptions isync ; May have turned off vec and fp here lwz r3,ACT_PER_PROC(r3) ; Get the per_proc block lwz r7,PP_PENDING_AST(r3) ; Get pending AST mask li r5,AST_URGENT ; Get the requests we do honor lis r0,hi16(DoPreemptCall) ; Just in case, get the top of firmware call and. r7,r7,r5 ; Should we preempt? ori r0,r0,lo16(DoPreemptCall) ; Merge in bottom part mtmsr r9 ; Allow interrupts if we can epCPno: beqlr+ ; We probably will not preempt... sc ; Do the preemption blr ; Now, go away now... /* * void disable_preemption(void) * * Here is where we disable preemption. */ .align 5 .globl EXT(_disable_preemption) LEXT(_disable_preemption) mfsprg r6,1 ; Get the current activation lwz r5,ACT_PREEMPT_CNT(r6) ; Get the preemption level addi r5,r5,1 ; Bring up the disable count stw r5,ACT_PREEMPT_CNT(r6) ; Save it back blr ; Return... /* * int get_preemption_level(void) * * Return the current preemption level */ .align 5 .globl EXT(get_preemption_level) LEXT(get_preemption_level) mfsprg r6,1 ; Get current activation lwz r3,ACT_PREEMPT_CNT(r6) ; Get the preemption level blr ; Return... /* * void ppc_usimple_lock_init(simple_lock_t, etap_event_t) * * Initialize a simple lock. */ .align 5 .globl EXT(ppc_usimple_lock_init) LEXT(ppc_usimple_lock_init) li r0, 0 ; set lock to free == 0 stw r0, 0(r3) ; Initialize the lock blr /* * void lck_spin_lock(lck_spin_t *) * void ppc_usimple_lock(simple_lock_t *) * */ .align 5 .globl EXT(lck_spin_lock) LEXT(lck_spin_lock) .globl EXT(ppc_usimple_lock) LEXT(ppc_usimple_lock) mfsprg r6,1 ; Get the current activation lwz r5,ACT_PREEMPT_CNT(r6) ; Get the preemption level addi r5,r5,1 ; Bring up the disable count stw r5,ACT_PREEMPT_CNT(r6) ; Save it back mr r5,r3 ; Get the address of the lock li r8,0 ; Set r8 to zero li r4,0 ; Set r4 to zero slcktry: lwarx r11,SLOCK_ILK,r5 ; Grab the lock value andi. r3,r11,ILK_LOCKED ; Is it locked? ori r11,r6,ILK_LOCKED ; Set interlock bne-- slckspin ; Yeah, wait for it to clear... stwcx. r11,SLOCK_ILK,r5 ; Try to seize that there durn lock bne-- slcktry ; Couldn't get it... .globl EXT(slckPatch_isync) LEXT(slckPatch_isync) isync ; Make sure we don't use a speculativily loaded value blr ; Go on home... slckspin: li r11,lgKillResv ; Killing field stwcx. r11,0,r11 ; Kill reservation mr. r4,r4 ; Test timeout value bne++ slockspin0 lis r4,hi16(EXT(LockTimeOut)) ; Get the high part ori r4,r4,lo16(EXT(LockTimeOut)) ; And the low part lwz r4,0(r4) ; Get the timerout value slockspin0: mr. r8,r8 ; Is r8 set to zero bne++ slockspin1 ; If yes, first spin attempt lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable mfmsr r9 ; Get the MSR value ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Turn off interruptions isync ; May have turned off vec and fp here mftb r8 ; Get timestamp on entry b slcksniff slockspin1: mtmsr r7 ; Turn off interruptions mftb r8 ; Get timestamp on entry slcksniff: lwz r3,SLOCK_ILK(r5) ; Get that lock in here andi. r3,r3,ILK_LOCKED ; Is it free yet? beq++ slckretry ; Yeah, try for it again... mftb r10 ; Time stamp us now sub r10,r10,r8 ; Get the elapsed time cmplwi r10,128 ; Have we been spinning for 128 tb ticks? blt++ slcksniff ; Not yet... mtmsr r9 ; Say, any interrupts pending? ; The following instructions force the pipeline to be interlocked to that only one ; instruction is issued per cycle. The insures that we stay enabled for a long enough ; time; if it's too short, pending interruptions will not have a chance to be taken subi r4,r4,128 ; Back off elapsed time from timeout value or r4,r4,r4 ; Do nothing here but force a single cycle delay mr. r4,r4 ; See if we used the whole timeout li r3,0 ; Assume a timeout return code or r4,r4,r4 ; Do nothing here but force a single cycle delay ble-- slckfail ; We failed b slockspin1 ; Now that we've opened an enable window, keep trying... slckretry: mtmsr r9 ; Restore interrupt state li r8,1 ; Show already through once b slcktry slckfail: ; We couldn't get the lock lis r3,hi16(slckpanic_str) ori r3,r3,lo16(slckpanic_str) mr r4,r5 mflr r5 PROLOG(0) bl EXT(panic) BREAKPOINT_TRAP ; We die here anyway .data slckpanic_str: STRINGD "simple lock (0x%08X) deadlock detection, pc=0x%08X\n\000" .text /* * boolean_t lck_spin_try_lock(lck_spin_t *) * unsigned int ppc_usimple_lock_try(simple_lock_t *) * */ .align 5 .globl EXT(lck_spin_try_lock) LEXT(lck_spin_try_lock) .globl EXT(ppc_usimple_lock_try) LEXT(ppc_usimple_lock_try) lis r0,hi16(MASK(MSR_VEC)) ; Get vector enable mfmsr r9 ; Get the MSR value ori r0,r0,lo16(MASK(MSR_FP)) ; Get FP enable ori r7,r0,lo16(MASK(MSR_EE)) ; Get EE bit on too andc r9,r9,r0 ; Clear FP and VEC andc r7,r9,r7 ; Clear EE as well mtmsr r7 ; Disable interruptions and thus, preemption mfsprg r6,1 ; Get current activation lwz r11,SLOCK_ILK(r3) ; Get the lock andi. r5,r11,ILK_LOCKED ; Check it... bne-- slcktryfail ; Quickly fail... slcktryloop: lwarx r11,SLOCK_ILK,r3 ; Ld from addr of arg and reserve andi. r5,r11,ILK_LOCKED ; TEST... ori r5,r6,ILK_LOCKED bne-- slcktryfailX ; branch if taken. Predict free stwcx. r5,SLOCK_ILK,r3 ; And SET (if still reserved) bne-- slcktryloop ; If set failed, loop back .globl EXT(stlckPatch_isync) LEXT(stlckPatch_isync) isync lwz r5,ACT_PREEMPT_CNT(r6) ; Get the preemption level addi r5,r5,1 ; Bring up the disable count stw r5,ACT_PREEMPT_CNT(r6) ; Save it back mtmsr r9 ; Allow interruptions now li r3,1 ; Set that the lock was free blr slcktryfailX: li r5,lgKillResv ; Killing field stwcx. r5,0,r5 ; Kill reservation slcktryfail: mtmsr r9 ; Allow interruptions now li r3,0 ; FAILURE - lock was taken blr /* * void lck_spin_unlock(lck_spin_t *) * void ppc_usimple_unlock_rwcmb(simple_lock_t *) * */ .align 5 .globl EXT(lck_spin_unlock) LEXT(lck_spin_unlock) .globl EXT(ppc_usimple_unlock_rwcmb) LEXT(ppc_usimple_unlock_rwcmb) li r0,0 .globl EXT(sulckPatch_isync) LEXT(sulckPatch_isync) isync .globl EXT(sulckPatch_eieio) LEXT(sulckPatch_eieio) eieio stw r0, SLOCK_ILK(r3) b epStart ; Go enable preemption... /* * void ppc_usimple_unlock_rwmb(simple_lock_t *) * */ .align 5 .globl EXT(ppc_usimple_unlock_rwmb) LEXT(ppc_usimple_unlock_rwmb) li r0,0 sync stw r0, SLOCK_ILK(r3) b epStart ; Go enable preemption... /* * void enter_funnel_section(funnel_t *) * */ .align 5 .globl EXT(enter_funnel_section) LEXT(enter_funnel_section) #if !MACH_LDEBUG lis r10,hi16(EXT(kdebug_enable)) ori r10,r10,lo16(EXT(kdebug_enable)) lwz r10,0(r10) lis r11,hi16(EXT(split_funnel_off)) ori r11,r11,lo16(EXT(split_funnel_off)) lwz r11,0(r11) or. r10,r11,r10 ; Check kdebug_enable or split_funnel_off bne- L_enter_funnel_section_slow ; If set, call the slow path mfsprg r6,1 ; Get the current activation lwz r7,LOCK_FNL_MUTEX(r3) lwz r5,0(r7) ; Get lock quickly mr. r5,r5 ; Locked? bne-- L_enter_funnel_section_slow ; Yup... L_enter_funnel_section_loop: lwarx r5,0,r7 ; Load the mutex lock mr. r5,r5 bne-- L_enter_funnel_section_slowX ; Go to the slow path stwcx. r6,0,r7 ; Grab the lock bne-- L_enter_funnel_section_loop ; Loop back if failed .globl EXT(entfsectPatch_isync) LEXT(entfsectPatch_isync) isync ; Stop prefeteching li r7,TH_FN_OWNED stw r3,THREAD_FUNNEL_LOCK(r6) ; Set the funnel lock reference stw r7,THREAD_FUNNEL_STATE(r6) ; Set the funnel state blr L_enter_funnel_section_slowX: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill reservation L_enter_funnel_section_slow: #endif li r4,TRUE b EXT(thread_funnel_set) /* * void exit_funnel_section(void) * */ .align 5 .globl EXT(exit_funnel_section) LEXT(exit_funnel_section) mfsprg r6,1 ; Get the current activation lwz r3,THREAD_FUNNEL_LOCK(r6) ; Get the funnel lock mr. r3,r3 ; Check on funnel held beq- L_exit_funnel_section_ret ; #if !MACH_LDEBUG lis r10,hi16(EXT(kdebug_enable)) ori r10,r10,lo16(EXT(kdebug_enable)) lwz r10,0(r10) mr. r10,r10 bne- L_exit_funnel_section_slow ; If set, call the slow path lwz r7,LOCK_FNL_MUTEX(r3) ; Get the funnel mutex lock .globl EXT(retfsectPatch_isync) LEXT(retfsectPatch_isync) isync .globl EXT(retfsectPatch_eieio) LEXT(retfsectPatch_eieio) eieio lwz r5,0(r7) ; Get lock rlwinm. r4,r5,0,30,31 ; Quick check for bail if pending waiter or interlock set bne-- L_exit_funnel_section_slow ; No can get... L_exit_funnel_section_loop: lwarx r5,0,r7 rlwinm. r4,r5,0,30,31 ; Bail if pending waiter or interlock set li r5,0 ; Clear the mutexlock bne-- L_exit_funnel_section_slowX stwcx. r5,0,r7 ; Release the funnel mutexlock bne-- L_exit_funnel_section_loop li r7,0 stw r7,THREAD_FUNNEL_STATE(r6) ; Clear the funnel state stw r7,THREAD_FUNNEL_LOCK(r6) ; Clear the funnel lock reference blr ; Return L_exit_funnel_section_slowX: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it L_exit_funnel_section_slow: #endif li r4,FALSE b EXT(thread_funnel_set) L_exit_funnel_section_ret: blr /* * void lck_rw_lock_exclusive(lck_rw_t*) * */ .align 5 .globl EXT(lck_rw_lock_exclusive) LEXT(lck_rw_lock_exclusive) #if !MACH_LDEBUG .globl EXT(lock_write) LEXT(lock_write) #endif rwleloop: lwarx r5,RW_DATA,r3 ; Grab the lock value rlwinm. r7,r5,30,1,31 ; Can we have it? ori r6,r5,WANT_EXCL ; Mark Exclusive bne-- rwlespin ; Branch if cannot be held stwcx. r6,RW_DATA,r3 ; Update lock word bne-- rwleloop .globl EXT(rwlePatch_isync) LEXT(rwlePatch_isync) isync blr rwlespin: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it cmpli cr0,r5,RW_IND ; Is it a lock indirect bne-- rwlespin1 ; No, go handle contention mr r4,r3 ; pass lock pointer lwz r3,RW_PTR(r3) ; load lock ext pointer b EXT(lck_rw_lock_exclusive_ext) rwlespin1: b EXT(lck_rw_lock_exclusive_gen) /* * void lck_rw_lock_shared(lck_rw_t*) * */ .align 5 .globl EXT(lck_rw_lock_shared) LEXT(lck_rw_lock_shared) #if !MACH_LDEBUG .globl EXT(lock_read) LEXT(lock_read) #endif rwlsloop: lwarx r5,RW_DATA,r3 ; Grab the lock value andi. r7,r5,WANT_EXCL|WANT_UPGRADE|ILK_LOCKED ; Can we have it? addis r6,r5,1 ; Increment read cnt bne-- rwlsspin ; Branch if cannot be held stwcx. r6,RW_DATA,r3 ; Update lock word bne-- rwlsloop .globl EXT(rwlsPatch_isync) LEXT(rwlsPatch_isync) isync blr rwlsspin: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it cmpli cr0,r5,RW_IND ; Is it a lock indirect bne-- rwlsspin1 ; No, go handle contention mr r4,r3 ; pass lock pointer lwz r3,RW_PTR(r3) ; load lock ext pointer b EXT(lck_rw_lock_shared_ext) rwlsspin1: b EXT(lck_rw_lock_shared_gen) /* * boolean_t lck_rw_lock_shared_to_exclusive(lck_rw_t*) * */ .align 5 .globl EXT(lck_rw_lock_shared_to_exclusive) LEXT(lck_rw_lock_shared_to_exclusive) #if !MACH_LDEBUG .globl EXT(lock_read_to_write) LEXT(lock_read_to_write) #endif rwlseloop: lwarx r5,RW_DATA,r3 ; Grab the lock value addis r6,r5,0xFFFF ; Decrement read cnt lis r8,0xFFFF ; Get read count mask ori r8,r8,WANT_UPGRADE|ILK_LOCKED ; Include Interlock and upgrade flags and. r7,r6,r8 ; Can we have it? ori r9,r6,WANT_UPGRADE ; Mark Exclusive bne-- rwlsespin ; Branch if cannot be held stwcx. r9,RW_DATA,r3 ; Update lock word bne-- rwlseloop .globl EXT(rwlsePatch_isync) LEXT(rwlsePatch_isync) isync li r3,0 ; Succeed, return FALSE... blr rwlsespin: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it cmpli cr0,r5,RW_IND ; Is it a lock indirect bne-- rwlsespin1 ; No, go handle contention mr r4,r3 ; pass lock pointer lwz r3,RW_PTR(r3) ; load lock ext pointer b EXT(lck_rw_lock_shared_to_exclusive_ext) rwlsespin1: b EXT(lck_rw_lock_shared_to_exclusive_gen) /* * void lck_rw_lock_exclusive_to_shared(lck_rw_t*) * */ .align 5 .globl EXT(lck_rw_lock_exclusive_to_shared) LEXT(lck_rw_lock_exclusive_to_shared) #if !MACH_LDEBUG .globl EXT(lock_write_to_read) LEXT(lock_write_to_read) #endif .globl EXT(rwlesPatch_isync) LEXT(rwlesPatch_isync) isync .globl EXT(rwlesPatch_eieio) LEXT(rwlesPatch_eieio) eieio rwlesloop: lwarx r5,RW_DATA,r3 ; Grab the lock value andi. r7,r5,ILK_LOCKED ; Test interlock flag bne-- rwlesspin ; Branch if interlocked lis r6,1 ; Get 1 for read count andi. r10,r5,WANT_UPGRADE ; Is it held with upgrade li r9,WANT_UPGRADE|WAIT_FLAG ; Get upgrade and wait flags mask bne rwlesexcl1 ; Skip if held with upgrade li r9,WANT_EXCL|WAIT_FLAG ; Get exclusive and wait flags mask rwlesexcl1: andc r7,r5,r9 ; Marked free rlwimi r6,r7,0,16,31 ; Set shared cnt to one stwcx. r6,RW_DATA,r3 ; Update lock word bne-- rwlesloop andi. r7,r5,WAIT_FLAG ; Test wait flag beqlr++ ; Return of no waiters addi r3,r3,RW_EVENT ; Get lock event address b EXT(thread_wakeup) ; wakeup waiters rwlesspin: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it cmpli cr0,r5,RW_IND ; Is it a lock indirect bne-- rwlesspin1 ; No, go handle contention mr r4,r3 ; pass lock pointer lwz r3,RW_PTR(r3) ; load lock ext pointer b EXT(lck_rw_lock_exclusive_to_shared_ext) rwlesspin1: b EXT(lck_rw_lock_exclusive_to_shared_gen) /* * boolean_t lck_rw_try_lock_exclusive(lck_rw_t*) * */ .align 5 .globl EXT(lck_rw_try_lock_exclusive) LEXT(lck_rw_try_lock_exclusive) lis r10,0xFFFF ; Load read count mask ori r10,r10,WANT_EXCL|WANT_UPGRADE ; Include exclusive and upgrade flags rwtleloop: lwarx r5,RW_DATA,r3 ; Grab the lock value andi. r7,r5,ILK_LOCKED ; Test interlock flag bne-- rwtlespin ; Branch if interlocked and. r7,r5,r10 ; Can we have it ori r6,r5,WANT_EXCL ; Mark Exclusive bne-- rwtlefail ; stwcx. r6,RW_DATA,r3 ; Update lock word bne-- rwtleloop .globl EXT(rwtlePatch_isync) LEXT(rwtlePatch_isync) isync li r3,1 ; Return TRUE blr rwtlefail: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it li r3,0 ; Return FALSE blr rwtlespin: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it cmpli cr0,r5,RW_IND ; Is it a lock indirect bne-- rwtlespin1 ; No, go handle contention mr r4,r3 ; pass lock pointer lwz r3,RW_PTR(r3) ; load lock ext pointer b EXT(lck_rw_try_lock_exclusive_ext) rwtlespin1: b EXT(lck_rw_try_lock_exclusive_gen) /* * boolean_t lck_rw_try_lock_shared(lck_rw_t*) * */ .align 5 .globl EXT(lck_rw_try_lock_shared) LEXT(lck_rw_try_lock_shared) rwtlsloop: lwarx r5,RW_DATA,r3 ; Grab the lock value andi. r7,r5,ILK_LOCKED ; Test interlock flag bne-- rwtlsspin ; Branch if interlocked andi. r7,r5,WANT_EXCL|WANT_UPGRADE ; So, can we have it? addis r6,r5,1 ; Increment read cnt bne-- rwtlsfail ; Branch if held exclusive stwcx. r6,RW_DATA,r3 ; Update lock word bne-- rwtlsloop .globl EXT(rwtlsPatch_isync) LEXT(rwtlsPatch_isync) isync li r3,1 ; Return TRUE blr rwtlsfail: li r3,0 ; Return FALSE blr rwtlsspin: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it cmpli cr0,r5,RW_IND ; Is it a lock indirect bne-- rwtlsspin1 ; No, go handle contention mr r4,r3 ; pass lock pointer lwz r3,RW_PTR(r3) ; load lock ext pointer b EXT(lck_rw_try_lock_shared_ext) rwtlsspin1: b EXT(lck_rw_try_lock_shared_gen) /* * lck_rw_type_t lck_rw_done(lck_rw_t*) * */ .align 5 .globl EXT(lck_rw_done) LEXT(lck_rw_done) #if !MACH_LDEBUG .globl EXT(lock_done) LEXT(lock_done) #endif .globl EXT(rwldPatch_isync) LEXT(rwldPatch_isync) isync .globl EXT(rwldPatch_eieio) LEXT(rwldPatch_eieio) eieio li r10,WAIT_FLAG ; Get wait flag lis r7,0xFFFF ; Get read cnt mask mr r12,r3 ; Save lock addr rwldloop: lwarx r5,RW_DATA,r3 ; Grab the lock value andi. r8,r5,ILK_LOCKED ; Test interlock flag bne-- rwldspin ; Branch if interlocked and. r8,r5,r7 ; Is it shared cmpi cr1,r8,0 ; Is it shared beq cr1,rwldexcl ; No, check exclusive li r11,RW_SHARED ; Set return value addis r6,r5,0xFFFF ; Decrement read count and. r8,r6,r7 ; Is it still shared li r8,0 ; Assume no wakeup bne rwldshared1 ; Skip if still held shared and r8,r6,r10 ; Extract wait flag andc r6,r6,r10 ; Clear wait flag rwldshared1: b rwldstore rwldexcl: li r11,RW_EXCL ; Set return value li r9,WANT_UPGRADE ; Get upgrade flag and. r6,r5,r9 ; Is it held with upgrade li r9,WANT_UPGRADE|WAIT_FLAG ; Mask upgrade abd wait flags bne rwldexcl1 ; Skip if held with upgrade li r9,WANT_EXCL|WAIT_FLAG ; Mask exclusive and wait flags rwldexcl1: andc r6,r5,r9 ; Marked free and r8,r5,r10 ; Null if no waiter rwldstore: stwcx. r6,RW_DATA,r3 ; Update lock word bne-- rwldloop mr. r8,r8 ; wakeup needed? mr r3,r11 ; Return lock held type beqlr++ mr r3,r12 ; Restore lock address PROLOG(0) addi r3,r3,RW_EVENT ; Get lock event address bl EXT(thread_wakeup) ; wakeup threads lwz r2,(FM_ALIGN(0)+FM_SIZE+FM_CR_SAVE)(r1) mtcr r2 EPILOG li r3,RW_SHARED ; Assume lock type shared bne cr1,rwldret ; Branch if was held exclusive li r3,RW_EXCL ; Return lock type exclusive rwldret: blr rwldspin: li r4,lgKillResv ; Killing field stwcx. r4,0,r4 ; Kill it cmpli cr0,r5,RW_IND ; Is it a lock indirect bne-- rwldspin1 ; No, go handle contention mr r4,r3 ; pass lock pointer lwz r3,RW_PTR(r3) ; load lock ext pointer b EXT(lck_rw_done_ext) rwldspin1: b EXT(lck_rw_done_gen) /* * void lck_rw_ilk_lock(lck_rw_t *lock) */ .globl EXT(lck_rw_ilk_lock) LEXT(lck_rw_ilk_lock) crclr hwtimeout ; no timeout option li r4,0 ; request default timeout value li r12,ILK_LOCKED ; Load bit mask b lckcomm ; Join on up... /* * void lck_rw_ilk_unlock(lck_rw_t *lock) */ .globl EXT(lck_rw_ilk_unlock) LEXT(lck_rw_ilk_unlock) li r4,1 b EXT(hw_unlock_bit)