/* * Copyright (c) 2000-2005 Apple Computer, Inc. All rights reserved. * * @APPLE_LICENSE_HEADER_START@ * * The contents of this file constitute Original Code as defined in and * are subject to the Apple Public Source License Version 1.1 (the * "License"). You may not use this file except in compliance with the * License. Please obtain a copy of the License at * http://www.apple.com/publicsource and read it before using this file. * * This Original Code and all software distributed under the License are * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the * License for the specific language governing rights and limitations * under the License. * * @APPLE_LICENSE_HEADER_END@ */ /* * @OSF_COPYRIGHT@ */ #include #include #include #include #include #include #include #include #include #include #define ESPDEBUG 0 #define INSTRUMENT 0 #define featAltivec 29 #define wasNapping 30 #define VECTOR_SEGMENT .section __VECTORS, __interrupts VECTOR_SEGMENT .globl EXT(lowGlo) EXT(lowGlo): .globl EXT(ExceptionVectorsStart) EXT(ExceptionVectorsStart): /* Used if relocating the exception vectors */ baseR: /* Used so we have more readable code */ ; ; Handle system reset. ; We do not ever expect a hard reset so we do not actually check. ; When we come here, we check for a RESET_HANDLER_START (which means we are ; waking up from sleep), a RESET_HANDLER_BUPOR (which is using for bring up ; when starting directly from a POR), and RESET_HANDLER_IGNORE (which means ; ignore the interrupt). ; ; Some machines (so far, 32-bit guys) will always ignore a non-START interrupt. ; The ones who do take it, check if the interrupt is too be ignored. This is ; always the case until the previous reset is handled (i.e., we have exited ; from the debugger). ; . = 0xf0 .globl EXT(ResetHandler) EXT(ResetHandler): .long 0x0 .long 0x0 .long 0x0 . = 0x100 .L_handler100: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ lwz r13,lo16(EXT(ResetHandler)-EXT(ExceptionVectorsStart)+RESETHANDLER_TYPE)(br0) ; Get reset type mfcr r11 cmpi cr0,r13,RESET_HANDLER_START bne resetexc li r11,RESET_HANDLER_NULL stw r11,lo16(EXT(ResetHandler)-EXT(ExceptionVectorsStart)+RESETHANDLER_TYPE)(br0) ; Clear reset type lwz r4,lo16(EXT(ResetHandler)-EXT(ExceptionVectorsStart)+RESETHANDLER_CALL)(br0) lwz r3,lo16(EXT(ResetHandler)-EXT(ExceptionVectorsStart)+RESETHANDLER_ARG)(br0) mtlr r4 blr resetexc: cmplwi r13,RESET_HANDLER_BUPOR ; Special bring up POR sequence? bne resetexc2 ; No... lis r4,hi16(EXT(resetPOR)) ; Get POR code ori r4,r4,lo16(EXT(resetPOR)) ; The rest mtlr r4 ; Set it blr ; Jump to it.... resetexc2: cmplwi cr1,r13,RESET_HANDLER_IGNORE ; Are we ignoring these? (Software debounce) mfsprg r13,0 ; Get per_proc lwz r13,pfAvailable(r13) ; Get the features rlwinm. r13,r13,0,pf64Bitb,pf64Bitb ; Is this a 64-bit machine? cror cr1_eq,cr0_eq,cr1_eq ; See if we want to take this bne-- cr1,rxCont ; Yes, continue... bne-- rxIg64 ; 64-bit path... mtcr r11 ; Restore the CR mfsprg r13,2 ; Restore R13 mfsprg r11,0 ; Get per_proc lwz r11,pfAvailable(r11) ; Get the features mtsprg 2,r11 ; Restore sprg2 mfsprg r11,3 ; Restore R11 rfi ; Return and ignore the reset rxIg64: mtcr r11 ; Restore the CR mfsprg r11,0 ; Get per_proc mtspr hsprg0,r14 ; Save a register ld r14,UAW(r11) ; Get the User Assist DoubleWord mfsprg r13,2 ; Restore R13 lwz r11,pfAvailable(r11) ; Get the features mtsprg 2,r11 ; Restore sprg2 mfsprg r11,3 ; Restore R11 mtsprg 3,r14 ; Set the UAW in sprg3 mfspr r14,hsprg0 ; Restore R14 rfid ; Return and ignore the reset rxCont: mtcr r11 li r11,RESET_HANDLER_IGNORE ; Get set to ignore stw r11,lo16(EXT(ResetHandler)-EXT(ExceptionVectorsStart)+RESETHANDLER_TYPE)(br0) ; Start ignoring these mfsprg r13,1 /* Get the exception save area */ li r11,T_RESET /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * Machine check */ . = 0x200 .L_handler200: mtsprg 2,r13 ; Save R13 mtsprg 3,r11 ; Save R11 .globl EXT(extPatchMCK) LEXT(extPatchMCK) ; This is patched to a nop for 64-bit b h200aaa ; Skip 64-bit code... ; ; Fall through here for 970 MCKs. ; li r11,1 ; ? sldi r11,r11,32+3 ; ? mfspr r13,hid4 ; ? or r11,r11,r13 ; ? sync mtspr hid4,r11 ; ? isync li r11,1 ; ? sldi r11,r11,32+8 ; ? andc r13,r13,r11 ; ? lis r11,0xE000 ; Get the unlikeliest ESID possible sync mtspr hid4,r13 ; ? isync ; ? srdi r11,r11,1 ; ? slbie r11 ; ? sync isync li r11,T_MACHINE_CHECK ; Set rupt code b .L_exception_entry ; Join common... ; ; Preliminary checking of other MCKs ; h200aaa: mfsrr1 r11 ; Get the SRR1 mfcr r13 ; Save the CR rlwinm. r11,r11,0,dcmck,dcmck ; ? beq+ notDCache ; ? sync mfspr r11,msscr0 ; ? dssall ; ? sync isync oris r11,r11,hi16(dl1hwfm) ; ? mtspr msscr0,r11 ; ? rstbsy: mfspr r11,msscr0 ; ? rlwinm. r11,r11,0,dl1hwf,dl1hwf ; ? bne rstbsy ; ? sync ; ? mfsprg r11,0 ; Get the per_proc mtcrf 255,r13 ; Restore CRs lwz r13,hwMachineChecks(r11) ; Get old count addi r13,r13,1 ; Count this one stw r13,hwMachineChecks(r11) ; Set new count lwz r11,pfAvailable(r11) ; Get the feature flags mfsprg r13,2 ; Restore R13 mtsprg 2,r11 ; Set the feature flags mfsprg r11,3 ; Restore R11 rfi ; Return notDCache: mtcrf 255,r13 ; Restore CRs li r11,T_MACHINE_CHECK ; Set rupt code b .L_exception_entry ; Join common... /* * Data access - page fault, invalid memory rights for operation */ . = 0x300 .L_handler300: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_DATA_ACCESS /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * Data segment */ . = 0x380 .L_handler380: mtsprg 2,r13 ; Save R13 mtsprg 3,r11 ; Save R11 li r11,T_DATA_SEGMENT ; Set rupt code b .L_exception_entry ; Join common... /* * Instruction access - as for data access */ . = 0x400 .L_handler400: mtsprg 2,r13 ; Save R13 mtsprg 3,r11 ; Save R11 li r11,T_INSTRUCTION_ACCESS ; Set rupt code b .L_exception_entry ; Join common... /* * Instruction segment */ . = 0x480 .L_handler480: mtsprg 2,r13 ; Save R13 mtsprg 3,r11 ; Save R11 li r11,T_INSTRUCTION_SEGMENT ; Set rupt code b .L_exception_entry ; Join common... /* * External interrupt */ . = 0x500 .L_handler500: mtsprg 2,r13 ; Save R13 mtsprg 3,r11 ; Save R11 li r11,T_INTERRUPT ; Set rupt code b .L_exception_entry ; Join common... /* * Alignment - many reasons */ . = 0x600 .L_handler600: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_ALIGNMENT|T_FAM /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * Program - floating point exception, illegal inst, priv inst, user trap */ . = 0x700 .L_handler700: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ #if 0 mfsrr1 r13 ; (BRINGUP) mfcr r11 ; (BRINGUP) rlwinm. r13,r13,0,12,12 ; (BRINGUP) crmove cr1_eq,cr0_eq ; (BRINGUP) mfsrr1 r13 ; (BRINGUP) rlwinm. r13,r13,0,MSR_PR_BIT,MSR_PR_BIT ; (BRINGUP) crorc cr0_eq,cr1_eq,cr0_eq ; (BRINGUP) bf-- cr0_eq,. ; (BRINGUP) mtcrf 255,r11 ; (BRINGUP) #endif li r11,T_PROGRAM|T_FAM /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * Floating point disabled */ . = 0x800 .L_handler800: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_FP_UNAVAILABLE /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * Decrementer - DEC register has passed zero. */ . = 0x900 .L_handler900: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_DECREMENTER /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * I/O controller interface error - MACH does not use this */ . = 0xA00 .L_handlerA00: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_IO_ERROR /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * Reserved */ . = 0xB00 .L_handlerB00: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_RESERVED /* Set interrupt code */ b .L_exception_entry /* Join common... */ ; System Calls (sc instruction) ; ; The syscall number is in r0. All we do here is munge the number into an ; 8-bit index into the "scTable", and dispatch on it to handle the Ultra ; Fast Traps (UFTs.) The index is: ; ; 0x80 - set if syscall number is 0x80000000 (CutTrace) ; 0x40 - set if syscall number is 0x00006004 ; 0x20 - set if upper 29 bits of syscall number are 0xFFFFFFF8 ; 0x10 - set if upper 29 bits of syscall number are 0x00007FF0 ; 0x0E - low three bits of syscall number ; 0x01 - zero, as scTable is an array of shorts . = 0xC00 .L_handlerC00: mtsprg 3,r11 ; Save R11 mtsprg 2,r13 ; Save R13 rlwinm r11,r0,0,0xFFFFFFF8 ; mask off low 3 bits of syscall number xori r13,r11,0x7FF0 ; start to check for the 0x7FFx traps addi r11,r11,8 ; make a 0 iff this is a 0xFFFFFFF8 trap cntlzw r13,r13 ; set bit 0x20 iff a 0x7FFx trap cntlzw r11,r11 ; set bit 0x20 iff a 0xFFFFFFF8 trap xoris r0,r0,0x8000 ; Flip bit to make 0 iff 0x80000000 rlwimi r11,r13,31,0x10 ; move 0x7FFx bit into position cntlzw r13,r0 ; Set bit 0x20 iff 0x80000000 xoris r0,r0,0x8000 ; Flip bit to restore R0 rlwimi r11,r13,2,0x80 ; Set bit 0x80 iff CutTrace xori r13,r0,0x6004 ; start to check for 0x6004 rlwimi r11,r0,1,0xE ; move in low 3 bits of syscall number cntlzw r13,r13 ; set bit 0x20 iff 0x6004 rlwinm r11,r11,0,0,30 ; clear out bit 31 rlwimi r11,r13,1,0x40 ; move 0x6004 bit into position lhz r11,lo16(scTable)(r11) ; get branch address from sc table mfctr r13 ; save callers ctr in r13 mtctr r11 ; set up branch to syscall handler mfsprg r11,0 ; get per_proc, which most UFTs use bctr ; dispatch (r11 in sprg3, r13 in sprg2, ctr in r13, per_proc in r11) /* * Trace - generated by single stepping * performance monitor BE branch enable tracing/logging * is also done here now. while this is permanently in the * system the impact is completely unnoticable as this code is * only executed when (a) a single step or branch exception is * hit, (b) in the single step debugger case there is so much * overhead already the few extra instructions for testing for BE * are not even noticable, (c) the BE logging code is *only* run * when it is enabled by the tool which will not happen during * normal system usage * * Note that this trace is available only to user state so we do not * need to set sprg2 before returning. */ . = 0xD00 .L_handlerD00: mtsprg 3,r11 ; Save R11 mfsprg r11,2 ; Get the feature flags mtsprg 2,r13 ; Save R13 rlwinm r11,r11,pf64Bitb-4,4,4 ; Get the 64-bit flag mfcr r13 ; Get the CR mtcrf 0x40,r11 ; Set the CR mfsrr1 r11 ; Get the old MSR rlwinm. r11,r11,0,MSR_PR_BIT,MSR_PR_BIT ; Are we in supervisor state? mfsprg r11,0 ; Get the per_proc lhz r11,PP_CPU_FLAGS(r11) ; Get the flags crmove cr1_eq,cr0_eq ; Remember if we are in supervisor state rlwinm. r11,r11,0,traceBEb+16,traceBEb+16 ; Special trace enabled? cror cr0_eq,cr0_eq,cr1_eq ; Is trace off or supervisor state? bf-- cr0_eq,specbrtr ; No, we need to trace... notspectr: mtcr r13 ; Restore CR li r11,T_TRACE|T_FAM ; Set interrupt code b .L_exception_entry ; Join common... .align 5 ; ; We are doing the special branch trace ; specbrtr: mfsprg r11,0 ; Get the per_proc area bt++ 4,sbxx64a ; Jump if 64-bit... stw r1,tempr0+4(r11) ; Save in a scratch area stw r2,tempr1+4(r11) ; Save in a scratch area stw r3,tempr2+4(r11) ; Save in a scratch area b sbxx64b ; Skip... sbxx64a: std r1,tempr0(r11) ; Save in a scratch area std r2,tempr1(r11) ; Save in a scratch area std r3,tempr2(r11) ; Save in a scratch area sbxx64b: lis r2,hi16(EXT(pc_trace_buf)) ; Get the top of the buffer lwz r3,spcTRp(r11) ; Pick up buffer position ori r2,r2,lo16(EXT(pc_trace_buf)) ; Get the bottom of the buffer cmplwi cr2,r3,4092 ; Set cr1_eq if we should take exception mfsrr0 r1 ; Get the pc stwx r1,r2,r3 ; Save it in the buffer addi r3,r3,4 ; Point to the next slot rlwinm r3,r3,0,20,31 ; Wrap the slot at one page stw r3,spcTRp(r11) ; Save the new slot bt++ 4,sbxx64c ; Jump if 64-bit... lwz r1,tempr0+4(r11) ; Restore work register lwz r2,tempr1+4(r11) ; Restore work register lwz r3,tempr2+4(r11) ; Restore work register beq cr2,notspectr ; Buffer filled, make a rupt... mtcr r13 ; Restore CR b uftRFI ; Go restore and leave... sbxx64c: ld r1,tempr0(r11) ; Restore work register ld r2,tempr1(r11) ; Restore work register ld r3,tempr2(r11) ; Restore work register beq cr2,notspectr ; Buffer filled, make a rupt... mtcr r13 ; Restore CR b uftRFI ; Go restore and leave... /* * Floating point assist */ . = 0xE00 .L_handlerE00: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_FP_ASSIST /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * Performance monitor interruption */ . = 0xF00 PMIhandler: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_PERF_MON /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * VMX exception */ . = 0xF20 VMXhandler: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_VMX /* Set interrupt code */ b .L_exception_entry /* Join common... */ ; ; Instruction translation miss exception - not supported ; . = 0x1000 .L_handler1000: mtsprg 2,r13 ; Save R13 mtsprg 3,r11 ; Save R11 li r11,T_INVALID_EXCP0 ; Set rupt code b .L_exception_entry ; Join common... ; ; Data load translation miss exception - not supported ; . = 0x1100 .L_handler1100: mtsprg 2,r13 ; Save R13 mtsprg 3,r11 ; Save R11 li r11,T_INVALID_EXCP1 ; Set rupt code b .L_exception_entry ; Join common... ; ; Data store translation miss exception - not supported ; . = 0x1200 .L_handler1200: mtsprg 2,r13 ; Save R13 mtsprg 3,r11 ; Save R11 li r11,T_INVALID_EXCP2 ; Set rupt code b .L_exception_entry ; Join common... /* * Instruction address breakpoint */ . = 0x1300 .L_handler1300: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_INSTRUCTION_BKPT /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * System management interrupt */ . = 0x1400 .L_handler1400: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_SYSTEM_MANAGEMENT /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * Soft Patch */ . = 0x1500 .L_handler1500: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_SOFT_PATCH /* Set interrupt code */ b .L_exception_entry /* Join common... */ ; ; Altivec Java Mode Assist interrupt or Maintenace interrupt ; . = 0x1600 .L_handler1600: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_ALTIVEC_ASSIST /* Set interrupt code */ b .L_exception_entry /* Join common... */ ; ; Altivec Java Mode Assist interrupt or Thermal interruption ; . = 0x1700 .L_handler1700: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_THERMAL /* Set interrupt code */ b .L_exception_entry /* Join common... */ ; ; Thermal interruption - 64-bit ; . = 0x1800 .L_handler1800: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_ARCHDEP0 /* Set interrupt code */ b .L_exception_entry /* Join common... */ /* * There is now a large gap of reserved traps */ /* * Instrumentation interruption */ . = 0x2000 .L_handler2000: mtsprg 2,r13 /* Save R13 */ mtsprg 3,r11 /* Save R11 */ li r11,T_INSTRUMENTATION /* Set interrupt code */ b .L_exception_entry /* Join common... */ .data .align ALIGN .globl EXT(exception_entry) EXT(exception_entry): .long .L_exception_entry-EXT(ExceptionVectorsStart) /* phys addr of fn */ VECTOR_SEGMENT /*<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><> * * First-level syscall dispatch. The syscall vector maps r0 (the syscall number) into an * index into the "scTable" (below), and then branches to one of these routines. The PPC * syscalls come in several varieties, as follows: * * 1. If (syscall & 0xFFFFF000) == 0x00007000, then it is a PPC Fast Trap or UFT. * The UFTs are dispatched here, the Fast Traps are dispatched in hw_exceptions.s. * * 2. If (syscall & 0xFFFFF000) == 0x00006000, then it is a PPC-only trap. * One of these (0x6004) is a UFT, but most are dispatched in hw_exceptions.s. These * are mostly Blue Box or VMM (Virtual Machine) calls. * * 3. If (syscall & 0xFFFFFFF0) == 0xFFFFFFF0, then it is also a UFT and is dispatched here. * * 4. If (syscall & 0xFFFFF000) == 0x80000000, then it is a "firmware" call and is dispatched in * Firmware.s, though the special "Cut Trace" trap (0x80000000) is handled here as an ultra * fast trap. * * 5. If (syscall & 0xFFFFF000) == 0xFFFFF000, and it is not one of the above, then it is a Mach * syscall, which are dispatched in hw_exceptions.s via "mach_trap_table". * * 6. If (syscall & 0xFFFFF000) == 0x00000000, then it is a BSD syscall, which are dispatched * by "unix_syscall" using the "sysent" table. * * What distinguishes the UFTs, aside from being ultra fast, is that they cannot rely on translation * being on, and so cannot look at the activation or task control block, etc. We handle them right * here, and return to the caller without turning interrupts or translation on. The UFTs are: * * 0xFFFFFFFF - BlueBox only - MKIsPreemptiveTask * 0xFFFFFFFE - BlueBox only - MKIsPreemptiveTaskEnv * 0x00007FF2 - User state only - thread info (32-bit mode) * 0x00007FF3 - User state only - floating point / vector facility status * 0x00007FF4 - Kernel only - loadMSR - not used on 64-bit machines * 0x00006004 - vmm_dispatch (only some of which are UFTs) * * "scTable" is an array of 2-byte addresses, accessed using a 7-bit index derived from the syscall * number as follows: * * 0x80 (A) - set if syscall number is 0x80000000 * 0x40 (B) - set if syscall number is 0x00006004 * 0x20 (C) - set if upper 29 bits of syscall number are 0xFFFFFFF8 * 0x10 (D) - set if upper 29 bits of syscall number are 0x00007FF0 * 0x0E (E) - low three bits of syscall number * * If you define another UFT, try to use a number in one of the currently decoded ranges, ie one marked * "unassigned" below. The dispatch table and the UFT handlers must reside in the first 32KB of * physical memory. */ .align 8 ; start this table on a 256-byte boundry scTable: ; ABCD E .short uftNormalSyscall-baseR ; 0000 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0000 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0000 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0000 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0000 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0000 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0000 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0000 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0001 0 0x7FF0 is unassigned .short uftNormalSyscall-baseR ; 0001 1 0x7FF1 is Set Thread Info Fast Trap (pass up) .short uftThreadInfo-baseR ; 0001 2 0x7FF2 is Thread Info .short uftFacilityStatus-baseR ; 0001 3 0x7FF3 is Facility Status .short uftLoadMSR-baseR ; 0001 4 0x7FF4 is Load MSR .short uftNormalSyscall-baseR ; 0001 5 0x7FF5 is the Null FastPath Trap (pass up) .short uftNormalSyscall-baseR ; 0001 6 0x7FF6 is unassigned .short uftNormalSyscall-baseR ; 0001 7 0x7FF7 is unassigned .short uftNormalSyscall-baseR ; 0010 0 0xFFFFFFF0 is unassigned .short uftNormalSyscall-baseR ; 0010 1 0xFFFFFFF1 is unassigned .short uftNormalSyscall-baseR ; 0010 2 0xFFFFFFF2 is unassigned .short uftNormalSyscall-baseR ; 0010 3 0xFFFFFFF3 is unassigned .short uftNormalSyscall-baseR ; 0010 4 0xFFFFFFF4 is unassigned .short uftNormalSyscall-baseR ; 0010 5 0xFFFFFFF5 is unassigned .short uftIsPreemptiveTaskEnv-baseR ; 0010 6 0xFFFFFFFE is Blue Box uftIsPreemptiveTaskEnv .short uftIsPreemptiveTask-baseR ; 0010 7 0xFFFFFFFF is Blue Box IsPreemptiveTask .short WhoaBaby-baseR ; 0011 0 impossible combination .short WhoaBaby-baseR ; 0011 1 impossible combination .short WhoaBaby-baseR ; 0011 2 impossible combination .short WhoaBaby-baseR ; 0011 3 impossible combination .short WhoaBaby-baseR ; 0011 4 impossible combination .short WhoaBaby-baseR ; 0011 5 impossible combination .short WhoaBaby-baseR ; 0011 6 impossible combination .short WhoaBaby-baseR ; 0011 7 impossible combination .short WhoaBaby-baseR ; 0100 0 0x6000 is an impossible index (diagCall) .short WhoaBaby-baseR ; 0100 1 0x6001 is an impossible index (vmm_get_version) .short WhoaBaby-baseR ; 0100 2 0x6002 is an impossible index (vmm_get_features) .short WhoaBaby-baseR ; 0100 3 0x6003 is an impossible index (vmm_init_context) .short uftVMM-baseR ; 0100 4 0x6004 is vmm_dispatch (only some of which are UFTs) .short WhoaBaby-baseR ; 0100 5 0x6005 is an impossible index (bb_enable_bluebox) .short WhoaBaby-baseR ; 0100 6 0x6006 is an impossible index (bb_disable_bluebox) .short WhoaBaby-baseR ; 0100 7 0x6007 is an impossible index (bb_settaskenv) .short uftNormalSyscall-baseR ; 0101 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0101 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0101 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0101 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0101 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0101 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0101 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0101 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0110 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0110 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0110 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0110 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0110 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0110 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0110 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0110 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0111 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0111 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0111 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0111 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0111 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0111 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0111 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 0111 7 these syscalls are not in a reserved range .short uftCutTrace-baseR ; 1000 0 CutTrace .short uftNormalSyscall-baseR ; 1000 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1000 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1000 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1000 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1000 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1000 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1000 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1001 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1001 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1001 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1001 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1001 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1001 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1001 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1001 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1010 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1010 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1010 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1010 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1010 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1010 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1010 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1010 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1011 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1011 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1011 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1011 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1011 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1011 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1011 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1011 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1100 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1100 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1100 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1100 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1100 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1100 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1100 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1100 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1101 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1101 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1101 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1101 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1101 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1101 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1101 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1101 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1110 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1110 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1110 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1110 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1110 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1110 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1110 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1110 7 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1111 0 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1111 1 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1111 2 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1111 3 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1111 4 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1111 5 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1111 6 these syscalls are not in a reserved range .short uftNormalSyscall-baseR ; 1111 7 these syscalls are not in a reserved range .align 2 ; prepare for code /* Ultra Fast Trap (UFT) Handlers: * * We get here directly from the hw syscall vector via the "scTable" vector (above), * with interrupts and VM off, in 64-bit mode if supported, and with all registers live * except the following: * * r11 = per_proc ptr (ie, sprg0) * r13 = holds callers ctr register * sprg2 = holds callers r13 * sprg3 = holds callers r11 */ ; Handle "vmm_dispatch" (0x6004), of which only some selectors are UFTs. uftVMM: mtctr r13 ; restore callers ctr lwz r11,spcFlags(r11) ; get the special flags word from per_proc mfcr r13 ; save callers entire cr (we use all fields below) rlwinm r11,r11,16,16,31 ; Extract spcFlags upper bits andi. r11,r11,hi16(runningVM|FamVMena|FamVMmode) cmpwi cr0,r11,hi16(runningVM|FamVMena|FamVMmode) ; Test in VM FAM bne-- uftNormal80 ; not eligible for FAM UFTs cmpwi cr5,r3,kvmmResumeGuest ; Compare r3 with kvmmResumeGuest cmpwi cr2,r3,kvmmSetGuestRegister ; Compare r3 with kvmmSetGuestRegister cror cr1_eq,cr5_lt,cr2_gt ; Set true if out of VMM Fast syscall range bt-- cr1_eq,uftNormalFF ; Exit if out of range (the others are not UFTs) b EXT(vmm_ufp) ; handle UFT range of vmm_dispatch syscall ; Handle blue box UFTs (syscalls -1 and -2). uftIsPreemptiveTask: uftIsPreemptiveTaskEnv: mtctr r13 ; restore callers ctr lwz r11,spcFlags(r11) ; get the special flags word from per_proc mfcr r13,0x80 ; save callers cr0 so we can use it andi. r11,r11,bbNoMachSC|bbPreemptive ; Clear what we do not need cmplwi r11,bbNoMachSC ; See if we are trapping syscalls blt-- uftNormal80 ; No... cmpwi r0,-2 ; is this call IsPreemptiveTaskEnv? rlwimi r13,r11,bbPreemptivebit-cr0_eq,cr0_eq,cr0_eq ; Copy preemptive task flag into user cr0_eq mfsprg r11,0 ; Get the per proc once more bne++ uftRestoreThenRFI ; do not load r0 if IsPreemptiveTask lwz r0,ppbbTaskEnv(r11) ; Get the shadowed taskEnv (only difference) b uftRestoreThenRFI ; restore modified cr0 and return ; Handle "Thread Info" UFT (0x7FF2) .globl EXT(uft_uaw_nop_if_32bit) uftThreadInfo: lwz r3,UAW+4(r11) ; get user assist word, assuming a 32-bit processor LEXT(uft_uaw_nop_if_32bit) ld r3,UAW(r11) ; get the whole doubleword if 64-bit (patched to nop if 32-bit) mtctr r13 ; restore callers ctr b uftRFI ; done ; Handle "Facility Status" UFT (0x7FF3) uftFacilityStatus: lwz r3,spcFlags(r11) ; get "special flags" word from per_proc mtctr r13 ; restore callers ctr b uftRFI ; done ; Handle "Load MSR" UFT (0x7FF4). This is not used on 64-bit processors, though it would work. uftLoadMSR: mfsrr1 r11 ; get callers MSR mtctr r13 ; restore callers ctr mfcr r13,0x80 ; save callers cr0 so we can test PR rlwinm. r11,r11,0,MSR_PR_BIT,MSR_PR_BIT ; really in the kernel? bne- uftNormal80 ; do not permit from user mode mfsprg r11,0 ; restore per_proc mtsrr1 r3 ; Set new MSR ; Return to caller after UFT. When called: ; r11 = per_proc ptr ; r13 = callers cr0 in upper nibble (if uftRestoreThenRFI called) ; sprg2 = callers r13 ; sprg3 = callers r11 uftRestoreThenRFI: ; WARNING: can drop down to here mtcrf 0x80,r13 ; restore callers cr0 uftRFI: .globl EXT(uft_nop_if_32bit) LEXT(uft_nop_if_32bit) b uftX64 ; patched to NOP if 32-bit processor uftX32: lwz r11,pfAvailable(r11) ; Get the feature flags mfsprg r13,2 ; Restore R13 mtsprg 2,r11 ; Set the feature flags mfsprg r11,3 ; Restore R11 rfi ; Back to our guy... uftX64: mtspr hsprg0,r14 ; Save a register in a Hypervisor SPRG ld r14,UAW(r11) ; Get the User Assist DoubleWord lwz r11,pfAvailable(r11) ; Get the feature flags mfsprg r13,2 ; Restore R13 mtsprg 2,r11 ; Set the feature flags mfsprg r11,3 ; Restore R11 mtsprg 3,r14 ; Set the UAW in sprg3 mfspr r14,hsprg0 ; Restore R14 rfid ; Back to our guy... ; ; Quickly cut a trace table entry for the CutTrace firmware call. ; ; All registers except R11 and R13 are unchanged. ; ; Note that this code cuts a trace table entry for the CutTrace call only. ; An identical entry is made during normal interrupt processing. Any entry ; format entry changes made must be done in both places. ; .align 5 .globl EXT(uft_cuttrace) LEXT(uft_cuttrace) uftCutTrace: b uftct64 ; patched to NOP if 32-bit processor stw r20,tempr0(r11) ; Save some work registers lwz r20,dgFlags(0) ; Get the flags stw r21,tempr1(r11) ; Save some work registers mfsrr1 r21 ; Get the SRR1 rlwinm r20,r20,MSR_PR_BIT-enaUsrFCallb,MASK(MSR_PR) ; Shift the validity bit over to pr bit spot stw r25,tempr2(r11) ; Save some work registers orc r20,r20,r21 ; Get ~PR | FC mfcr r25 ; Save the CR stw r22,tempr3(r11) ; Save some work registers lhz r22,PP_CPU_NUMBER(r11) ; Get the logical processor number andi. r20,r20,MASK(MSR_PR) ; Set cr0_eq is we are in problem state and the validity bit is not set stw r23,tempr4(r11) ; Save some work registers lwz r23,traceMask(0) ; Get the trace mask stw r24,tempr5(r11) ; Save some work registers beq- ctbail32 ; Can not issue from user... addi r24,r22,16 ; Get shift to move cpu mask to syscall mask rlwnm r24,r23,r24,12,12 ; Shift cpu mask bit to rupt type mask and. r24,r24,r23 ; See if both are on ; ; We select a trace entry using a compare and swap on the next entry field. ; Since we do not lock the actual trace buffer, there is a potential that ; another processor could wrap an trash our entry. Who cares? ; li r23,trcWork ; Get the trace work area address lwz r21,traceStart(0) ; Get the start of trace table lwz r22,traceEnd(0) ; Get end of trace table beq-- ctdisa32 ; Leave because tracing is disabled... ctgte32: lwarx r20,0,r23 ; Get and reserve the next slot to allocate addi r24,r20,LTR_size ; Point to the next trace entry cmplw r24,r22 ; Do we need to wrap the trace table? bne+ ctgte32s ; No wrap, we got us a trace entry... mr r24,r21 ; Wrap back to start ctgte32s: stwcx. r24,0,r23 ; Try to update the current pointer bne- ctgte32 ; Collision, try again... #if ESPDEBUG dcbf 0,r23 ; Force to memory sync #endif dcbz 0,r20 ; Clear and allocate first trace line li r24,32 ; Offset to next line ctgte32tb: mftbu r21 ; Get the upper time now mftb r22 ; Get the lower time now mftbu r23 ; Get upper again cmplw r21,r23 ; Has it ticked? bne- ctgte32tb ; Yes, start again... dcbz r24,r20 ; Clean second line ; ; Let us cut that trace entry now. ; ; Note that this code cuts a trace table entry for the CutTrace call only. ; An identical entry is made during normal interrupt processing. Any entry ; format entry changes made must be done in both places. ; lhz r24,PP_CPU_NUMBER(r11) ; Get the logical processor number li r23,T_SYSTEM_CALL ; Get the system call id mtctr r13 ; Restore the callers CTR sth r24,LTR_cpu(r20) ; Save processor number li r24,64 ; Offset to third line sth r23,LTR_excpt(r20) ; Set the exception code dcbz r24,r20 ; Clean 3rd line mfspr r23,dsisr ; Get the DSISR stw r21,LTR_timeHi(r20) ; Save top of time stamp li r24,96 ; Offset to fourth line mflr r21 ; Get the LR dcbz r24,r20 ; Clean 4th line stw r22,LTR_timeLo(r20) ; Save bottom of time stamp mfsrr0 r22 ; Get SRR0 stw r25,LTR_cr(r20) ; Save CR mfsrr1 r24 ; Get the SRR1 stw r23,LTR_dsisr(r20) ; Save DSISR stw r22,LTR_srr0+4(r20) ; Save SRR0 mfdar r23 ; Get DAR stw r24,LTR_srr1+4(r20) ; Save SRR1 stw r23,LTR_dar+4(r20) ; Save DAR stw r21,LTR_lr+4(r20) ; Save LR stw r13,LTR_ctr+4(r20) ; Save CTR stw r0,LTR_r0+4(r20) ; Save register stw r1,LTR_r1+4(r20) ; Save register stw r2,LTR_r2+4(r20) ; Save register stw r3,LTR_r3+4(r20) ; Save register stw r4,LTR_r4+4(r20) ; Save register stw r5,LTR_r5+4(r20) ; Save register stw r6,LTR_r6+4(r20) ; Save register #if 0 lwz r21,FPUowner(r11) ; (TEST/DEBUG) Get the current floating point owner stw r21,LTR_rsvd0(r20) ; (TEST/DEBUG) Record the owner #endif #if ESPDEBUG addi r21,r20,32 ; Second line addi r22,r20,64 ; Third line dcbst 0,r20 ; Force to memory dcbst 0,r21 ; Force to memory addi r21,r22,32 ; Fourth line dcbst 0,r22 ; Force to memory dcbst 0,r21 ; Force to memory sync ; Make sure it all goes #endif ctdisa32: mtcrf 0x80,r25 ; Restore the used condition register field lwz r20,tempr0(r11) ; Restore work register lwz r21,tempr1(r11) ; Restore work register lwz r25,tempr2(r11) ; Restore work register mtctr r13 ; Restore the callers CTR lwz r22,tempr3(r11) ; Restore work register lwz r23,tempr4(r11) ; Restore work register lwz r24,tempr5(r11) ; Restore work register b uftX32 ; Go restore the rest and go... ctbail32: mtcrf 0x80,r25 ; Restore the used condition register field lwz r20,tempr0(r11) ; Restore work register lwz r21,tempr1(r11) ; Restore work register lwz r25,tempr2(r11) ; Restore work register mtctr r13 ; Restore the callers CTR lwz r22,tempr3(r11) ; Restore work register lwz r23,tempr4(r11) ; Restore work register b uftNormalSyscall ; Go pass it on along... ; ; This is the 64-bit version. ; uftct64: std r20,tempr0(r11) ; Save some work registers lwz r20,dgFlags(0) ; Get the flags std r21,tempr1(r11) ; Save some work registers mfsrr1 r21 ; Get the SRR1 rlwinm r20,r20,MSR_PR_BIT-enaUsrFCallb,MASK(MSR_PR) ; Shift the validity bit over to pr bit spot std r25,tempr2(r11) ; Save some work registers orc r20,r20,r21 ; Get ~PR | FC mfcr r25 ; Save the CR std r22,tempr3(r11) ; Save some work registers lhz r22,PP_CPU_NUMBER(r11) ; Get the logical processor number andi. r20,r20,MASK(MSR_PR) ; Set cr0_eq when we are in problem state and the validity bit is not set std r23,tempr4(r11) ; Save some work registers lwz r23,traceMask(0) ; Get the trace mask std r24,tempr5(r11) ; Save some work registers beq-- ctbail64 ; Can not issue from user... addi r24,r22,16 ; Get shift to move cpu mask to syscall mask rlwnm r24,r23,r24,12,12 ; Shift cpu mask bit to rupt type mask and. r24,r24,r23 ; See if both are on ; ; We select a trace entry using a compare and swap on the next entry field. ; Since we do not lock the actual trace buffer, there is a potential that ; another processor could wrap an trash our entry. Who cares? ; li r23,trcWork ; Get the trace work area address lwz r21,traceStart(0) ; Get the start of trace table lwz r22,traceEnd(0) ; Get end of trace table beq-- ctdisa64 ; Leave because tracing is disabled... ctgte64: lwarx r20,0,r23 ; Get and reserve the next slot to allocate addi r24,r20,LTR_size ; Point to the next trace entry cmplw r24,r22 ; Do we need to wrap the trace table? bne++ ctgte64s ; No wrap, we got us a trace entry... mr r24,r21 ; Wrap back to start ctgte64s: stwcx. r24,0,r23 ; Try to update the current pointer bne-- ctgte64 ; Collision, try again... #if ESPDEBUG dcbf 0,r23 ; Force to memory sync #endif dcbz128 0,r20 ; Zap the trace entry mftb r21 ; Get the time ; ; Let us cut that trace entry now. ; ; Note that this code cuts a trace table entry for the CutTrace call only. ; An identical entry is made during normal interrupt processing. Any entry ; format entry changes made must be done in both places. ; lhz r24,PP_CPU_NUMBER(r11) ; Get the logical processor number li r23,T_SYSTEM_CALL ; Get the system call id sth r24,LTR_cpu(r20) ; Save processor number sth r23,LTR_excpt(r20) ; Set the exception code mfspr r23,dsisr ; Get the DSISR std r21,LTR_timeHi(r20) ; Save top of time stamp mflr r21 ; Get the LR mfsrr0 r22 ; Get SRR0 stw r25,LTR_cr(r20) ; Save CR mfsrr1 r24 ; Get the SRR1 stw r23,LTR_dsisr(r20) ; Save DSISR std r22,LTR_srr0(r20) ; Save SRR0 mfdar r23 ; Get DAR std r24,LTR_srr1(r20) ; Save SRR1 std r23,LTR_dar(r20) ; Save DAR std r21,LTR_lr(r20) ; Save LR std r13,LTR_ctr(r20) ; Save CTR std r0,LTR_r0(r20) ; Save register std r1,LTR_r1(r20) ; Save register std r2,LTR_r2(r20) ; Save register std r3,LTR_r3(r20) ; Save register std r4,LTR_r4(r20) ; Save register std r5,LTR_r5(r20) ; Save register std r6,LTR_r6(r20) ; Save register #if 0 lwz r21,FPUowner(r11) ; (TEST/DEBUG) Get the current floating point owner stw r21,LTR_rsvd0(r20) ; (TEST/DEBUG) Record the owner #endif #if ESPDEBUG dcbf 0,r20 ; Force to memory sync ; Make sure it all goes #endif ctdisa64: mtcrf 0x80,r25 ; Restore the used condition register field ld r20,tempr0(r11) ; Restore work register ld r21,tempr1(r11) ; Restore work register ld r25,tempr2(r11) ; Restore work register mtctr r13 ; Restore the callers CTR ld r22,tempr3(r11) ; Restore work register ld r23,tempr4(r11) ; Restore work register ld r24,tempr5(r11) ; Restore work register b uftX64 ; Go restore the rest and go... ctbail64: mtcrf 0x80,r25 ; Restore the used condition register field ld r20,tempr0(r11) ; Restore work register ld r21,tempr1(r11) ; Restore work register ld r25,tempr2(r11) ; Restore work register mtctr r13 ; Restore the callers CTR ld r22,tempr3(r11) ; Restore work register ld r23,tempr4(r11) ; Restore work register li r11,T_SYSTEM_CALL|T_FAM ; Set system code call b extEntry64 ; Go straight to the 64-bit code... ; Handle a system call that is not a UFT and which thus goes upstairs. uftNormalFF: ; here with entire cr in r13 mtcr r13 ; restore all 8 fields b uftNormalSyscall1 ; Join common... uftNormal80: ; here with callers cr0 in r13 mtcrf 0x80,r13 ; restore cr0 b uftNormalSyscall1 ; Join common... uftNormalSyscall: ; r13 = callers ctr mtctr r13 ; restore ctr uftNormalSyscall1: li r11,T_SYSTEM_CALL|T_FAM ; this is a system call (and fall through) /*<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>*/ /* * .L_exception_entry(type) * * Come here via branch directly from the vector, or falling down from above, with the following * set up: * * ENTRY: interrupts off, VM off, in 64-bit mode if supported * Callers r13 saved in sprg2. * Callers r11 saved in sprg3. * Exception code (ie, T_SYSTEM_CALL etc) in r11. * All other registers are live. * */ .L_exception_entry: ; WARNING: can fall through from UFT handler /* * * Here we will save off a mess of registers, the special ones and R0-R12. We use the DCBZ * instruction to clear and allcoate a line in the cache. This way we will not take any cache * misses, so these stores will not take all that long. Except the first line that is because * we can not do a DCBZ if the L1 D-cache is off. The rest we will skip if they are * off also. * * Note that if we are attempting to sleep (as opposed to nap or doze) all interruptions * are ignored. */ .globl EXT(extPatch32) LEXT(extPatch32) b extEntry64 ; Go do 64-bit (patched to a nop if 32-bit) mfsprg r13,0 ; Load per_proc lwz r13,next_savearea+4(r13) ; Get the exception save area stw r0,saver0+4(r13) ; Save register 0 stw r1,saver1+4(r13) ; Save register 1 mfspr r1,hid0 ; Get HID0 mfcr r0 ; Save the whole CR mtcrf 0x20,r1 ; Get set to test for sleep cror doze,doze,nap ; Remember if we are napping bf sleep,notsleep ; Skip if we are not trying to sleep mtcrf 0x20,r0 ; Restore the CR lwz r0,saver0+4(r13) ; Restore R0 lwz r1,saver1+4(r13) ; Restore R1 mfsprg r13,0 ; Get the per_proc lwz r11,pfAvailable(r13) ; Get back the feature flags mfsprg r13,2 ; Restore R13 mtsprg 2,r11 ; Set sprg2 to the features mfsprg r11,3 ; Restore R11 rfi ; Jump back into sleep code... .long 0 ; Leave these here please... .long 0 .long 0 .long 0 .long 0 .long 0 .long 0 .long 0 ; ; This is the 32-bit context saving stuff ; .align 5 notsleep: stw r2,saver2+4(r13) ; Save this one bf doze,notspdo ; Skip the next if we are not napping/dozing... rlwinm r2,r1,0,nap+1,doze-1 ; Clear any possible nap and doze bits mtspr hid0,r2 ; Clear the nap/doze bits notspdo: #if INSTRUMENT mfspr r2,pmc1 ; INSTRUMENT - saveinstr[0] - Take earliest possible stamp stw r2,0x6100+(0x00*16)+0x0(0) ; INSTRUMENT - Save it mfspr r2,pmc2 ; INSTRUMENT - Get stamp stw r2,0x6100+(0x00*16)+0x4(0) ; INSTRUMENT - Save it mfspr r2,pmc3 ; INSTRUMENT - Get stamp stw r2,0x6100+(0x00*16)+0x8(0) ; INSTRUMENT - Save it mfspr r2,pmc4 ; INSTRUMENT - Get stamp stw r2,0x6100+(0x00*16)+0xC(0) ; INSTRUMENT - Save it #endif la r1,saver4(r13) ; Point to the next line in case we need it crmove wasNapping,doze ; Remember if we were napping mfsprg r2,0 ; Get the per_proc area dcbz 0,r1 ; allocate r4-r7 32-byte line in cache ; ; Remember, we are setting up CR6 with feature flags ; andi. r1,r11,T_FAM ; Check FAM bit stw r3,saver3+4(r13) ; Save this one stw r4,saver4+4(r13) ; Save this one andc r11,r11,r1 ; Clear FAM bit beq+ noFAM ; Is it FAM intercept mfsrr1 r3 ; Load srr1 rlwinm. r3,r3,0,MSR_PR_BIT,MSR_PR_BIT ; Are we trapping from supervisor state? beq+ noFAM ; From supervisor state lwz r1,spcFlags(r2) ; Load spcFlags rlwinm r1,r1,1+FamVMmodebit,30,31 ; Extract FamVMenabit and FamVMmodebit cmpwi cr0,r1,2 ; Check FamVMena set without FamVMmode bne+ noFAM ; Can this context be FAM intercept lwz r4,FAMintercept(r2) ; Load exceptions mask to intercept srwi r1,r11,2 ; divide r11 by 4 lis r3,0x8000 ; Set r3 to 0x80000000 srw r1,r3,r1 ; Set bit for current exception and. r1,r1,r4 ; And current exception with the intercept mask beq+ noFAM ; Is it FAM intercept b EXT(vmm_fam_exc) noFAM: lwz r1,pfAvailable(r2) ; Get the CPU features flags la r3,saver8(r13) ; Point to line with r8-r11 mtcrf 0xE2,r1 ; Put the features flags (that we care about) in the CR dcbz 0,r3 ; allocate r8-r11 32-byte line in cache la r3,saver12(r13) ; point to r12-r15 line lis r4,hi16(MASK(MSR_VEC)|MASK(MSR_FP)|MASK(MSR_ME)) ; Set up the MSR we will use throughout. Note that ME come on here if MCK stw r6,saver6+4(r13) ; Save this one ori r4,r4,lo16(MASK(MSR_VEC)|MASK(MSR_FP)|MASK(MSR_ME)) ; Rest of MSR stw r8,saver8+4(r13) ; Save this one crmove featAltivec,pfAltivecb ; Set the Altivec flag mtmsr r4 ; Set MSR isync mfsrr0 r6 ; Get the interruption SRR0 la r8,savesrr0(r13) ; point to line with SRR0, SRR1, CR, XER, and LR dcbz 0,r3 ; allocate r12-r15 32-byte line in cache la r3,saver16(r13) ; point to next line dcbz 0,r8 ; allocate 32-byte line with SRR0, SRR1, CR, XER, and LR stw r7,saver7+4(r13) ; Save this one lhz r8,PP_CPU_FLAGS(r2) ; Get the flags mfsrr1 r7 ; Get the interrupt SRR1 rlwinm r8,r8,(((31-MSR_BE_BIT)+(traceBEb+16+1))&31),MSR_BE_BIT,MSR_BE_BIT ; Set BE bit if special trace is on stw r6,savesrr0+4(r13) ; Save the SRR0 rlwinm r6,r7,(((31-MSR_BE_BIT)+(MSR_PR_BIT+1))&31),MSR_BE_BIT,MSR_BE_BIT ; Move PR bit to BE bit stw r5,saver5+4(r13) ; Save this one and r8,r6,r8 ; Remove BE bit only if problem state and special tracing on mfsprg r6,2 ; Get interrupt time R13 mtsprg 2,r1 ; Set the feature flags andc r7,r7,r8 ; Clear BE bit if special trace is on and PR is set mfsprg r8,3 ; Get rupt time R11 stw r7,savesrr1+4(r13) ; Save SRR1 stw r8,saver11+4(r13) ; Save rupt time R11 stw r6,saver13+4(r13) ; Save rupt R13 dcbz 0,r3 ; allocate 32-byte line with r16-r19 la r3,saver20(r13) ; point to next line getTB: mftbu r6 ; Get the upper timebase mftb r7 ; Get the lower timebase mftbu r8 ; Get the upper one again cmplw r6,r8 ; Did the top tick? bne- getTB ; Yeah, need to get it again... #if INSTRUMENT mfspr r6,pmc1 ; INSTRUMENT - saveinstr[1] - Save halfway context save stamp stw r6,0x6100+(0x01*16)+0x0(0) ; INSTRUMENT - Save it mfspr r6,pmc2 ; INSTRUMENT - Get stamp stw r6,0x6100+(0x01*16)+0x4(0) ; INSTRUMENT - Save it mfspr r6,pmc3 ; INSTRUMENT - Get stamp stw r6,0x6100+(0x01*16)+0x8(0) ; INSTRUMENT - Save it mfspr r6,pmc4 ; INSTRUMENT - Get stamp stw r6,0x6100+(0x01*16)+0xC(0) ; INSTRUMENT - Save it #endif stw r8,ruptStamp(r2) ; Save the top of time stamp stw r8,SAVtime(r13) ; Save the top of time stamp stw r7,ruptStamp+4(r2) ; Save the bottom of time stamp stw r7,SAVtime+4(r13) ; Save the bottom of time stamp dcbz 0,r3 ; allocate 32-byte line with r20-r23 stw r9,saver9+4(r13) ; Save this one stw r10,saver10+4(r13) ; Save this one mflr r4 ; Get the LR mfxer r10 ; Get the XER bf+ wasNapping,notNapping ; Skip if not waking up from nap... lwz r6,napStamp+4(r2) ; Pick up low order nap stamp lis r3,hi16(EXT(machine_idle_ret)) ; Get high part of nap/doze return lwz r5,napStamp(r2) ; and high order subfc r7,r6,r7 ; Subtract low stamp from now lwz r6,napTotal+4(r2) ; Pick up low total subfe r5,r5,r8 ; Subtract high stamp and borrow from now lwz r8,napTotal(r2) ; Pick up the high total addc r6,r6,r7 ; Add low to total ori r3,r3,lo16(EXT(machine_idle_ret)) ; Get low part of nap/doze return adde r8,r8,r5 ; Add high and carry to total stw r6,napTotal+4(r2) ; Save the low total stw r8,napTotal(r2) ; Save the high total stw r3,savesrr0+4(r13) ; Modify to return to nap/doze exit rlwinm. r3,r1,0,pfSlowNapb,pfSlowNapb ; Should HID1 be restored? beq notInSlowNap lwz r3,pfHID1(r2) ; Get saved HID1 value mtspr hid1,r3 ; Restore HID1 notInSlowNap: rlwinm. r3,r1,0,pfNoL2PFNapb,pfNoL2PFNapb ; Should MSSCR0 be restored? beq notNapping lwz r3,pfMSSCR0(r2) ; Get saved MSSCR0 value mtspr msscr0,r3 ; Restore MSSCR0 sync isync notNapping: stw r12,saver12+4(r13) ; Save this one stw r14,saver14+4(r13) ; Save this one stw r15,saver15+4(r13) ; Save this one la r14,saver24(r13) ; Point to the next block to save into mfctr r6 ; Get the CTR stw r16,saver16+4(r13) ; Save this one la r15,savectr(r13) ; point to line with CTR, DAR, DSISR, Exception code, and VRSAVE stw r4,savelr+4(r13) ; Save rupt LR dcbz 0,r14 ; allocate 32-byte line with r24-r27 la r16,saver28(r13) ; point to line with r28-r31 dcbz 0,r15 ; allocate line with CTR, DAR, DSISR, Exception code, and VRSAVE stw r17,saver17+4(r13) ; Save this one stw r18,saver18+4(r13) ; Save this one stw r6,savectr+4(r13) ; Save rupt CTR stw r0,savecr(r13) ; Save rupt CR stw r19,saver19+4(r13) ; Save this one mfdar r6 ; Get the rupt DAR stw r20,saver20+4(r13) ; Save this one dcbz 0,r16 ; allocate 32-byte line with r28-r31 stw r21,saver21+4(r13) ; Save this one lwz r21,spcFlags(r2) ; Get the special flags from per_proc stw r10,savexer+4(r13) ; Save the rupt XER stw r30,saver30+4(r13) ; Save this one lhz r30,pfrptdProc(r2) ; Get the reported processor type stw r31,saver31+4(r13) ; Save this one stw r22,saver22+4(r13) ; Save this one stw r23,saver23+4(r13) ; Save this one stw r24,saver24+4(r13) ; Save this one stw r25,saver25+4(r13) ; Save this one mfdsisr r7 ; Get the rupt DSISR stw r26,saver26+4(r13) ; Save this one stw r27,saver27+4(r13) ; Save this one andis. r21,r21,hi16(perfMonitor) ; Is the performance monitor enabled? stw r28,saver28+4(r13) ; Save this one cmpwi cr1, r30,CPU_SUBTYPE_POWERPC_750 ; G3? la r27,savevscr(r13) ; point to 32-byte line with VSCR and FPSCR cmpwi cr2,r30,CPU_SUBTYPE_POWERPC_7400 ; This guy? stw r29,saver29+4(r13) ; Save R29 stw r6,savedar+4(r13) ; Save the rupt DAR li r10,savepmc ; Point to pmc savearea beq+ noPerfMonSave32 ; No perfmon on here... dcbz r10,r13 ; Clear first part of pmc area li r10,savepmc+0x20 ; Point to pmc savearea second part li r22,0 ; r22: zero dcbz r10,r13 ; Clear second part of pmc area beq cr1,perfMonSave32_750 ; This is a G3... beq cr2,perfMonSave32_7400 ; Regular olde G4... mfspr r24,pmc5 ; Here for a 7450 mfspr r25,pmc6 stw r24,savepmc+16(r13) ; Save PMC5 stw r25,savepmc+20(r13) ; Save PMC6 mtspr pmc5,r22 ; Leave PMC5 clear mtspr pmc6,r22 ; Leave PMC6 clear perfMonSave32_7400: mfspr r25,mmcr2 stw r25,savemmcr2+4(r13) ; Save MMCR2 mtspr mmcr2,r22 ; Leave MMCR2 clear perfMonSave32_750: mfspr r23,mmcr0 mfspr r24,mmcr1 stw r23,savemmcr0+4(r13) ; Save MMCR0 stw r24,savemmcr1+4(r13) ; Save MMCR1 mtspr mmcr0,r22 ; Leave MMCR0 clear mtspr mmcr1,r22 ; Leave MMCR1 clear mfspr r23,pmc1 mfspr r24,pmc2 mfspr r25,pmc3 mfspr r26,pmc4 stw r23,savepmc+0(r13) ; Save PMC1 stw r24,savepmc+4(r13) ; Save PMC2 stw r25,savepmc+8(r13) ; Save PMC3 stw r26,savepmc+12(r13) ; Save PMC4 mtspr pmc1,r22 ; Leave PMC1 clear mtspr pmc2,r22 ; Leave PMC2 clear mtspr pmc3,r22 ; Leave PMC3 clear mtspr pmc4,r22 ; Leave PMC4 clear noPerfMonSave32: dcbz 0,r27 ; allocate line with VSCR and FPSCR stw r7,savedsisr(r13) ; Save the rupt code DSISR stw r11,saveexception(r13) ; Save the exception code ; ; Everything is saved at this point, except for FPRs, and VMX registers. ; Time for us to get a new savearea and then trace interrupt if it is enabled. ; lwz r25,traceMask(0) ; Get the trace mask li r0,SAVgeneral ; Get the savearea type value lhz r19,PP_CPU_NUMBER(r2) ; Get the logical processor number rlwinm r22,r11,30,0,31 ; Divide interrupt code by 2 stb r0,SAVflags+2(r13) ; Mark valid context addi r22,r22,10 ; Adjust code so we shift into CR5 li r23,trcWork ; Get the trace work area address rlwnm r7,r25,r22,22,22 ; Set CR5_EQ bit position to 0 if tracing allowed li r26,0x8 ; Get start of cpu mask srw r26,r26,r19 ; Get bit position of cpu number mtcrf 0x04,r7 ; Set CR5 to show trace or not and. r26,r26,r25 ; See if we trace this cpu crandc cr5_eq,cr5_eq,cr0_eq ; Turn off tracing if cpu is disabled ; ; At this point, we can take another exception and lose nothing. ; #if INSTRUMENT mfspr r26,pmc1 ; INSTRUMENT - saveinstr[2] - Take stamp after save is done stw r26,0x6100+(0x02*16)+0x0(0) ; INSTRUMENT - Save it mfspr r26,pmc2 ; INSTRUMENT - Get stamp stw r26,0x6100+(0x02*16)+0x4(0) ; INSTRUMENT - Save it mfspr r26,pmc3 ; INSTRUMENT - Get stamp stw r26,0x6100+(0x02*16)+0x8(0) ; INSTRUMENT - Save it mfspr r26,pmc4 ; INSTRUMENT - Get stamp stw r26,0x6100+(0x02*16)+0xC(0) ; INSTRUMENT - Save it #endif bne+ cr5,xcp32xit ; Skip all of this if no tracing here... ; ; We select a trace entry using a compare and swap on the next entry field. ; Since we do not lock the actual trace buffer, there is a potential that ; another processor could wrap an trash our entry. Who cares? ; lwz r25,traceStart(0) ; Get the start of trace table lwz r26,traceEnd(0) ; Get end of trace table trcsel: lwarx r20,0,r23 ; Get and reserve the next slot to allocate addi r22,r20,LTR_size ; Point to the next trace entry cmplw r22,r26 ; Do we need to wrap the trace table? bne+ gotTrcEnt ; No wrap, we got us a trace entry... mr r22,r25 ; Wrap back to start gotTrcEnt: stwcx. r22,0,r23 ; Try to update the current pointer bne- trcsel ; Collision, try again... #if ESPDEBUG dcbf 0,r23 ; Force to memory sync #endif dcbz 0,r20 ; Clear and allocate first trace line ; ; Let us cut that trace entry now. ; ; Note that this code cuts a trace table entry for everything but the CutTrace call. ; An identical entry is made during normal CutTrace processing. Any entry ; format changes made must be done in both places. ; lwz r16,ruptStamp(r2) ; Get top of time base lwz r17,ruptStamp+4(r2) ; Get the bottom of time stamp li r14,32 ; Offset to second line lwz r0,saver0+4(r13) ; Get back interrupt time R0 lwz r1,saver1+4(r13) ; Get back interrupt time R1 lwz r8,savecr(r13) ; Get the CR value dcbz r14,r20 ; Zap the second line sth r19,LTR_cpu(r20) ; Stash the cpu number li r14,64 ; Offset to third line sth r11,LTR_excpt(r20) ; Save the exception type lwz r7,saver2+4(r13) ; Get back interrupt time R2 lwz r3,saver3+4(r13) ; Restore this one dcbz r14,r20 ; Zap the third half mfdsisr r9 ; Get the DSISR li r14,96 ; Offset to forth line stw r16,LTR_timeHi(r20) ; Set the upper part of TB stw r17,LTR_timeLo(r20) ; Set the lower part of TB lwz r10,savelr+4(r13) ; Get the LR mfsrr0 r17 ; Get SRR0 back, it is still good dcbz r14,r20 ; Zap the forth half lwz r4,saver4+4(r13) ; Restore this one lwz r5,saver5+4(r13) ; Restore this one mfsrr1 r18 ; SRR1 is still good in here stw r8,LTR_cr(r20) ; Save the CR lwz r6,saver6+4(r13) ; Get R6 mfdar r16 ; Get this back stw r9,LTR_dsisr(r20) ; Save the DSISR stw r17,LTR_srr0+4(r20) ; Save the SSR0 stw r18,LTR_srr1+4(r20) ; Save the SRR1 stw r16,LTR_dar+4(r20) ; Save the DAR mfctr r17 ; Get the CTR (still good in register) stw r13,LTR_save+4(r20) ; Save the savearea stw r10,LTR_lr+4(r20) ; Save the LR stw r17,LTR_ctr+4(r20) ; Save off the CTR stw r0,LTR_r0+4(r20) ; Save off register 0 stw r1,LTR_r1+4(r20) ; Save off register 1 stw r7,LTR_r2+4(r20) ; Save off register 2 stw r3,LTR_r3+4(r20) ; Save off register 3 stw r4,LTR_r4+4(r20) ; Save off register 4 stw r5,LTR_r5+4(r20) ; Save off register 5 stw r6,LTR_r6+4(r20) ; Save off register 6 #if ESPDEBUG addi r17,r20,32 ; Second line addi r16,r20,64 ; Third line dcbst br0,r20 ; Force to memory dcbst br0,r17 ; Force to memory addi r17,r17,32 ; Fourth line dcbst br0,r16 ; Force to memory dcbst br0,r17 ; Force to memory sync ; Make sure it all goes #endif xcp32xit: mr r14,r11 ; Save the interrupt code across the call bl EXT(save_get_phys_32) ; Grab a savearea mfsprg r2,0 ; Get the per_proc info li r10,emfp0 ; Point to floating point save mr r11,r14 ; Get the exception code back dcbz r10,r2 ; Clear for speed stw r3,next_savearea+4(r2) ; Store the savearea for the next rupt #if INSTRUMENT mfspr r4,pmc1 ; INSTRUMENT - saveinstr[3] - Take stamp after next savearea stw r4,0x6100+(0x03*16)+0x0(0) ; INSTRUMENT - Save it mfspr r4,pmc2 ; INSTRUMENT - Get stamp stw r4,0x6100+(0x03*16)+0x4(0) ; INSTRUMENT - Save it mfspr r4,pmc3 ; INSTRUMENT - Get stamp stw r4,0x6100+(0x03*16)+0x8(0) ; INSTRUMENT - Save it mfspr r4,pmc4 ; INSTRUMENT - Get stamp stw r4,0x6100+(0x03*16)+0xC(0) ; INSTRUMENT - Save it #endif b xcpCommon ; Go join the common interrupt processing... ; ; ; This is the 64-bit context saving stuff ; .align 5 extEntry64: mfsprg r13,0 ; Load per_proc ld r13,next_savearea(r13) ; Get the exception save area std r0,saver0(r13) ; Save register 0 lis r0,hi16(MASK(MSR_VEC)|MASK(MSR_FP)|MASK(MSR_ME)) ; Set up the MSR we will use throughout. Note that ME come on here if MCK std r1,saver1(r13) ; Save register 1 ori r1,r0,lo16(MASK(MSR_VEC)|MASK(MSR_FP)|MASK(MSR_ME)) ; Rest of MSR lis r0,0x0010 ; Get rupt code transform validity mask mtmsr r1 ; Set MSR isync ori r0,r0,0x0200 ; Get rupt code transform validity mask std r2,saver2(r13) ; Save this one lis r1,0x00F0 ; Top half of xform XOR rlwinm r2,r11,29,27,31 ; Get high 5 bits of rupt code std r3,saver3(r13) ; Save this one slw r0,r0,r2 ; Move transform validity bit to bit 0 std r4,saver4(r13) ; Save this one std r5,saver5(r13) ; Save this one ori r1,r1,0x04EC ; Bottom half of xform XOR mfxer r5 ; Save the XER because we are about to muck with it rlwinm r4,r11,1,27,28 ; Get bottom of interrupt code * 8 lis r3,hi16(dozem|napm) ; Get the nap and doze bits srawi r0,r0,31 ; Get 0xFFFFFFFF of xform valid, 0 otherwise rlwnm r4,r1,r4,24,31 ; Extract the xform XOR li r1,saver16 ; Point to the next line and r4,r4,r0 ; Only keep transform if we are to use it li r2,lgKillResv ; Point to the killing field mfcr r0 ; Save the CR stwcx. r2,0,r2 ; Kill any pending reservation dcbz128 r1,r13 ; Blow away the line sldi r3,r3,32 ; Position it mfspr r1,hid0 ; Get HID0 andc r3,r1,r3 ; Clear nap and doze xor r11,r11,r4 ; Transform 970 rupt code to standard keeping FAM bit cmpld r3,r1 ; See if nap and/or doze was on std r6,saver6(r13) ; Save this one mfsprg r2,0 ; Get the per_proc area la r6,savesrr0(r13) ; point to line with SRR0, SRR1, CR, XER, and LR beq++ eE64NoNap ; No nap here, skip all this... sync ; Make sure we are clean mtspr hid0,r3 ; Set the updated hid0 mfspr r1,hid0 ; Yes, this is silly, keep it here mfspr r1,hid0 ; Yes, this is a duplicate, keep it here mfspr r1,hid0 ; Yes, this is a duplicate, keep it here mfspr r1,hid0 ; Yes, this is a duplicate, keep it here mfspr r1,hid0 ; Yes, this is a duplicate, keep it here mfspr r1,hid0 ; Yes, this is a duplicate, keep it here eE64NoNap: crnot wasNapping,cr0_eq ; Remember if we were napping andi. r1,r11,T_FAM ; Check FAM bit beq++ eEnoFAM ; Is it FAM intercept mfsrr1 r3 ; Load srr1 andc r11,r11,r1 ; Clear FAM bit rlwinm. r3,r3,0,MSR_PR_BIT,MSR_PR_BIT ; Are we trapping from supervisor state? beq++ eEnoFAM ; From supervisor state lwz r1,spcFlags(r2) ; Load spcFlags rlwinm r1,r1,1+FamVMmodebit,30,31 ; Extract FamVMenabit and FamVMmodebit cmpwi cr0,r1,2 ; Check FamVMena set without FamVMmode bne++ eEnoFAM ; Can this context be FAM intercept lwz r4,FAMintercept(r2) ; Load exceptions mask to intercept li r3,0 ; Clear srwi r1,r11,2 ; divide r11 by 4 oris r3,r3,0x8000 ; Set r3 to 0x80000000 srw r1,r3,r1 ; Set bit for current exception and. r1,r1,r4 ; And current exception with the intercept mask beq++ eEnoFAM ; Is it FAM intercept b EXT(vmm_fam_exc) .align 5 eEnoFAM: lwz r1,pfAvailable(r2) ; Get the CPU features flags dcbz128 0,r6 ; allocate 128-byte line with SRR0, SRR1, CR, XER, and LR ; ; Remember, we are setting up CR6 with feature flags ; std r7,saver7(r13) ; Save this one mtcrf 0x80,r1 ; Put the features flags (that we care about) in the CR std r8,saver8(r13) ; Save this one mtcrf 0x40,r1 ; Put the features flags (that we care about) in the CR mfsrr0 r6 ; Get the interruption SRR0 lhz r8,PP_CPU_FLAGS(r2) ; Get the flags mtcrf 0x20,r1 ; Put the features flags (that we care about) in the CR mfsrr1 r7 ; Get the interrupt SRR1 rlwinm r8,r8,(((31-MSR_BE_BIT)+(traceBEb+16+1))&31),MSR_BE_BIT,MSR_BE_BIT ; Set BE bit if special trace is on std r6,savesrr0(r13) ; Save the SRR0 mtcrf 0x02,r1 ; Put the features flags (that we care about) in the CR rlwinm r6,r7,(((31-MSR_BE_BIT)+(MSR_PR_BIT+1))&31),MSR_BE_BIT,MSR_BE_BIT ; Move PR bit to BE bit and r8,r6,r8 ; Remove BE bit only if problem state and special tracing on std r9,saver9(r13) ; Save this one andc r7,r7,r8 ; Clear BE bit if special trace is on and PR is set crmove featAltivec,pfAltivecb ; Set the Altivec flag std r7,savesrr1(r13) ; Save SRR1 mfsprg r9,3 ; Get rupt time R11 std r10,saver10(r13) ; Save this one mfsprg r6,2 ; Get interrupt time R13 std r9,saver11(r13) ; Save rupt time R11 mtsprg 2,r1 ; Set the feature flags std r12,saver12(r13) ; Save this one mflr r4 ; Get the LR mftb r7 ; Get the timebase std r6,saver13(r13) ; Save rupt R13 std r7,ruptStamp(r2) ; Save the time stamp std r7,SAVtime(r13) ; Save the time stamp bf++ wasNapping,notNappingSF ; Skip if not waking up from nap... ld r6,napStamp(r2) ; Pick up nap stamp lis r3,hi16(EXT(machine_idle_ret)) ; Get high part of nap/doze return sub r7,r7,r6 ; Subtract stamp from now ld r6,napTotal(r2) ; Pick up total add r6,r6,r7 ; Add low to total ori r3,r3,lo16(EXT(machine_idle_ret)) ; Get low part of nap/doze return std r6,napTotal(r2) ; Save the high total std r3,savesrr0(r13) ; Modify to return to nap/doze exit notNappingSF: std r14,saver14(r13) ; Save this one std r15,saver15(r13) ; Save this one stw r0,savecr(r13) ; Save rupt CR mfctr r6 ; Get the CTR std r16,saver16(r13) ; Save this one std r4,savelr(r13) ; Save rupt LR std r17,saver17(r13) ; Save this one li r7,savepmc ; Point to pmc area std r18,saver18(r13) ; Save this one lwz r17,spcFlags(r2) ; Get the special flags from per_proc std r6,savectr(r13) ; Save rupt CTR std r19,saver19(r13) ; Save this one mfdar r6 ; Get the rupt DAR std r20,saver20(r13) ; Save this one dcbz128 r7,r13 ; Clear out the pmc spot std r21,saver21(r13) ; Save this one std r5,savexer(r13) ; Save the rupt XER std r22,saver22(r13) ; Save this one std r23,saver23(r13) ; Save this one std r24,saver24(r13) ; Save this one std r25,saver25(r13) ; Save this one mfdsisr r7 ; Get the rupt DSISR std r26,saver26(r13) ; Save this one andis. r17,r17,hi16(perfMonitor) ; Is the performance monitor enabled? std r27,saver27(r13) ; Save this one li r10,emfp0 ; Point to floating point save std r28,saver28(r13) ; Save this one la r27,savevscr(r13) ; point to 32-byte line with VSCR and FPSCR std r29,saver29(r13) ; Save R29 std r30,saver30(r13) ; Save this one std r31,saver31(r13) ; Save this one std r6,savedar(r13) ; Save the rupt DAR stw r7,savedsisr(r13) ; Save the rupt code DSISR stw r11,saveexception(r13) ; Save the exception code beq++ noPerfMonSave64 ; Performance monitor not on... li r22,0 ; r22: zero mfspr r23,mmcr0_gp mfspr r24,mmcr1_gp mfspr r25,mmcra_gp std r23,savemmcr0(r13) ; Save MMCR0 std r24,savemmcr1(r13) ; Save MMCR1 std r25,savemmcr2(r13) ; Save MMCRA mtspr mmcr0_gp,r22 ; Leave MMCR0 clear mtspr mmcr1_gp,r22 ; Leave MMCR1 clear mtspr mmcra_gp,r22 ; Leave MMCRA clear mfspr r23,pmc1_gp mfspr r24,pmc2_gp mfspr r25,pmc3_gp mfspr r26,pmc4_gp stw r23,savepmc+0(r13) ; Save PMC1 stw r24,savepmc+4(r13) ; Save PMC2 stw r25,savepmc+8(r13) ; Save PMC3 stw r26,savepmc+12(r13) ; Save PMC4 mfspr r23,pmc5_gp mfspr r24,pmc6_gp mfspr r25,pmc7_gp mfspr r26,pmc8_gp stw r23,savepmc+16(r13) ; Save PMC5 stw r24,savepmc+20(r13) ; Save PMC6 stw r25,savepmc+24(r13) ; Save PMC7 stw r26,savepmc+28(r13) ; Save PMC8 mtspr pmc1_gp,r22 ; Leave PMC1 clear mtspr pmc2_gp,r22 ; Leave PMC2 clear mtspr pmc3_gp,r22 ; Leave PMC3 clear mtspr pmc4_gp,r22 ; Leave PMC4 clear mtspr pmc5_gp,r22 ; Leave PMC5 clear mtspr pmc6_gp,r22 ; Leave PMC6 clear mtspr pmc7_gp,r22 ; Leave PMC7 clear mtspr pmc8_gp,r22 ; Leave PMC8 clear noPerfMonSave64: ; ; Everything is saved at this point, except for FPRs, and VMX registers. ; Time for us to get a new savearea and then trace interrupt if it is enabled. ; lwz r25,traceMask(0) ; Get the trace mask li r0,SAVgeneral ; Get the savearea type value lhz r19,PP_CPU_NUMBER(r2) ; Get the logical processor number stb r0,SAVflags+2(r13) ; Mark valid context rlwinm r22,r11,30,0,31 ; Divide interrupt code by 2 li r23,trcWork ; Get the trace work area address addi r22,r22,10 ; Adjust code so we shift into CR5 li r26,0x8 ; Get start of cpu mask rlwnm r7,r25,r22,22,22 ; Set CR5_EQ bit position to 0 if tracing allowed srw r26,r26,r19 ; Get bit position of cpu number mtcrf 0x04,r7 ; Set CR5 to show trace or not and. r26,r26,r25 ; See if we trace this cpu crandc cr5_eq,cr5_eq,cr0_eq ; Turn off tracing if cpu is disabled bne++ cr5,xcp64xit ; Skip all of this if no tracing here... ; ; We select a trace entry using a compare and swap on the next entry field. ; Since we do not lock the actual trace buffer, there is a potential that ; another processor could wrap an trash our entry. Who cares? ; lwz r25,traceStart(0) ; Get the start of trace table lwz r26,traceEnd(0) ; Get end of trace table trcselSF: lwarx r20,0,r23 ; Get and reserve the next slot to allocate addi r22,r20,LTR_size ; Point to the next trace entry cmplw r22,r26 ; Do we need to wrap the trace table? bne++ gotTrcEntSF ; No wrap, we got us a trace entry... mr r22,r25 ; Wrap back to start gotTrcEntSF: stwcx. r22,0,r23 ; Try to update the current pointer bne- trcselSF ; Collision, try again... #if ESPDEBUG dcbf 0,r23 ; Force to memory sync #endif ; ; Let us cut that trace entry now. ; ; Note that this code cuts a trace table entry for everything but the CutTrace call. ; An identical entry is made during normal CutTrace processing. Any entry ; format changes made must be done in both places. ; dcbz128 0,r20 ; Zap the trace entry lwz r9,SAVflags(r13) ; Get savearea flags ld r16,ruptStamp(r2) ; Get top of time base ld r0,saver0(r13) ; Get back interrupt time R0 (we need this whether we trace or not) std r16,LTR_timeHi(r20) ; Set the upper part of TB ld r1,saver1(r13) ; Get back interrupt time R1 rlwinm r9,r9,20,16,23 ; Isolate the special flags ld r18,saver2(r13) ; Get back interrupt time R2 std r0,LTR_r0(r20) ; Save off register 0 rlwimi r9,r19,0,24,31 ; Slide in the cpu number ld r3,saver3(r13) ; Restore this one sth r9,LTR_cpu(r20) ; Stash the cpu number and special flags std r1,LTR_r1(r20) ; Save off register 1 ld r4,saver4(r13) ; Restore this one std r18,LTR_r2(r20) ; Save off register 2 ld r5,saver5(r13) ; Restore this one ld r6,saver6(r13) ; Get R6 std r3,LTR_r3(r20) ; Save off register 3 lwz r16,savecr(r13) ; Get the CR value std r4,LTR_r4(r20) ; Save off register 4 mfsrr0 r17 ; Get SRR0 back, it is still good std r5,LTR_r5(r20) ; Save off register 5 std r6,LTR_r6(r20) ; Save off register 6 mfsrr1 r18 ; SRR1 is still good in here stw r16,LTR_cr(r20) ; Save the CR std r17,LTR_srr0(r20) ; Save the SSR0 std r18,LTR_srr1(r20) ; Save the SRR1 mfdar r17 ; Get this back ld r16,savelr(r13) ; Get the LR std r17,LTR_dar(r20) ; Save the DAR mfctr r17 ; Get the CTR (still good in register) std r16,LTR_lr(r20) ; Save the LR std r17,LTR_ctr(r20) ; Save off the CTR mfdsisr r17 ; Get the DSISR std r13,LTR_save(r20) ; Save the savearea stw r17,LTR_dsisr(r20) ; Save the DSISR sth r11,LTR_excpt(r20) ; Save the exception type #if 0 lwz r17,FPUowner(r2) ; (TEST/DEBUG) Get the current floating point owner stw r17,LTR_rsvd0(r20) ; (TEST/DEBUG) Record the owner #endif #if ESPDEBUG dcbf 0,r20 ; Force to memory sync ; Make sure it all goes #endif xcp64xit: mr r14,r11 ; Save the interrupt code across the call bl EXT(save_get_phys_64) ; Grab a savearea mfsprg r2,0 ; Get the per_proc info li r10,emfp0 ; Point to floating point save mr r11,r14 ; Get the exception code back dcbz128 r10,r2 ; Clear for speed std r3,next_savearea(r2) ; Store the savearea for the next rupt b xcpCommon ; Go join the common interrupt processing... ; ; All of the context is saved. Now we will get a ; fresh savearea. After this we can take an interrupt. ; .align 5 xcpCommon: ; ; Here we will save some floating point and vector status ; and we also set a clean default status for a new interrupt level. ; Note that we assume that emfp0 is on an altivec boundary ; and that R10 points to it (as a displacemnt from R2). ; ; We need to save the FPSCR as if it is normal context. ; This is because pending exceptions will cause an exception even if ; FP is disabled. We need to clear the FPSCR when we first start running in the ; kernel. ; stfd f0,emfp0(r2) ; Save FPR0 stfd f1,emfp1(r2) ; Save FPR1 li r19,0 ; Assume no Altivec mffs f0 ; Get the FPSCR lfd f1,Zero(0) ; Make a 0 stfd f0,savefpscrpad(r13) ; Save the FPSCR li r9,0 ; Get set to clear VRSAVE mtfsf 0xFF,f1 ; Clear it addi r14,r10,16 ; Displacement to second vector register lfd f0,emfp0(r2) ; Restore FPR0 la r28,savevscr(r13) ; Point to the status area lfd f1,emfp1(r2) ; Restore FPR1 bf featAltivec,noavec ; No Altivec on this CPU... stvxl v0,r10,r2 ; Save a register stvxl v1,r14,r2 ; Save a second register mfspr r19,vrsave ; Get the VRSAVE register mfvscr v0 ; Get the vector status register vspltish v1,1 ; Turn on the non-Java bit and saturate stvxl v0,0,r28 ; Save the vector status vspltisw v0,1 ; Turn on the saturate bit vxor v1,v1,v0 ; Turn off saturate mtvscr v1 ; Set the non-java, no saturate status for new level mtspr vrsave,r9 ; Clear VRSAVE for each interrupt level lvxl v0,r10,r2 ; Restore first work register lvxl v1,r14,r2 ; Restore second work register noavec: stw r19,savevrsave(r13) ; Save the vector register usage flags ; ; We are now done saving all of the context. Start filtering the interrupts. ; Note that a Redrive will count as an actual interrupt. ; Note also that we take a lot of system calls so we will start decode here. ; Redrive: #if INSTRUMENT mfspr r20,pmc1 ; INSTRUMENT - saveinstr[4] - Take stamp before exception filter stw r20,0x6100+(0x04*16)+0x0(0) ; INSTRUMENT - Save it mfspr r20,pmc2 ; INSTRUMENT - Get stamp stw r20,0x6100+(0x04*16)+0x4(0) ; INSTRUMENT - Save it mfspr r20,pmc3 ; INSTRUMENT - Get stamp stw r20,0x6100+(0x04*16)+0x8(0) ; INSTRUMENT - Save it mfspr r20,pmc4 ; INSTRUMENT - Get stamp stw r20,0x6100+(0x04*16)+0xC(0) ; INSTRUMENT - Save it #endif lwz r22,SAVflags(r13) ; Pick up the flags lwz r0,saver0+4(r13) ; Get back interrupt time syscall number mfsprg r2,0 ; Restore per_proc lwz r20,lo16(xcpTable)(r11) ; Get the interrupt handler (note: xcpTable must be in 1st 32k of physical memory) la r12,hwCounts(r2) ; Point to the exception count area andis. r24,r22,hi16(SAVeat) ; Should we eat this one? rlwinm r22,r22,SAVredriveb+1,31,31 ; Get a 1 if we are redriving add r12,r12,r11 ; Point to the count lwz r25,0(r12) ; Get the old value lwz r23,hwRedrives(r2) ; Get the redrive count crmove cr3_eq,cr0_eq ; Remember if we are ignoring xori r24,r22,1 ; Get the NOT of the redrive mtctr r20 ; Point to the interrupt handler mtcrf 0x80,r0 ; Set our CR0 to the high nybble of possible syscall code add r25,r25,r24 ; Count this one if not a redrive add r23,r23,r22 ; Count this one if if is a redrive crandc cr0_lt,cr0_lt,cr0_gt ; See if we have R0 equal to 0b10xx...x stw r25,0(r12) ; Store it back stw r23,hwRedrives(r2) ; Save the redrive count bne-- cr3,IgnoreRupt ; Interruption is being ignored... bctr ; Go process the exception... ; ; Exception vector filter table (like everything in this file, must be in 1st 32KB of physical memory) ; .align 7 xcpTable: .long EatRupt ; T_IN_VAIN .long PassUpTrap ; T_RESET .long MachineCheck ; T_MACHINE_CHECK .long EXT(handlePF) ; T_DATA_ACCESS .long EXT(handlePF) ; T_INSTRUCTION_ACCESS .long PassUpRupt ; T_INTERRUPT .long EXT(AlignAssist) ; T_ALIGNMENT .long EXT(Emulate) ; T_PROGRAM .long PassUpFPU ; T_FP_UNAVAILABLE .long PassUpRupt ; T_DECREMENTER .long PassUpTrap ; T_IO_ERROR .long PassUpTrap ; T_RESERVED .long xcpSyscall ; T_SYSTEM_CALL .long PassUpTrap ; T_TRACE .long PassUpTrap ; T_FP_ASSIST .long PassUpTrap ; T_PERF_MON .long PassUpVMX ; T_VMX .long PassUpTrap ; T_INVALID_EXCP0 .long PassUpTrap ; T_INVALID_EXCP1 .long PassUpTrap ; T_INVALID_EXCP2 .long PassUpTrap ; T_INSTRUCTION_BKPT .long PassUpRupt ; T_SYSTEM_MANAGEMENT .long EXT(AltivecAssist) ; T_ALTIVEC_ASSIST .long PassUpRupt ; T_THERMAL .long PassUpTrap ; T_INVALID_EXCP5 .long PassUpTrap ; T_INVALID_EXCP6 .long PassUpTrap ; T_INVALID_EXCP7 .long PassUpTrap ; T_INVALID_EXCP8 .long PassUpTrap ; T_INVALID_EXCP9 .long PassUpTrap ; T_INVALID_EXCP10 .long PassUpTrap ; T_INVALID_EXCP11 .long PassUpTrap ; T_INVALID_EXCP12 .long PassUpTrap ; T_INVALID_EXCP13 .long PassUpTrap ; T_RUNMODE_TRACE .long PassUpRupt ; T_SIGP .long PassUpTrap ; T_PREEMPT .long conswtch ; T_CSWITCH .long PassUpRupt ; T_SHUTDOWN .long PassUpAbend ; T_CHOKE .long EXT(handleDSeg) ; T_DATA_SEGMENT .long EXT(handleISeg) ; T_INSTRUCTION_SEGMENT .long WhoaBaby ; T_SOFT_PATCH .long WhoaBaby ; T_MAINTENANCE .long WhoaBaby ; T_INSTRUMENTATION .long WhoaBaby ; T_ARCHDEP0 .long EatRupt ; T_HDEC ; ; Just what the heck happened here???? ; NB: also get here from UFT dispatch table, on bogus index ; WhoaBaby: b . ; Open the hood and wait for help .align 5 IgnoreRupt: lwz r20,hwIgnored(r2) ; Grab the ignored interruption count addi r20,r20,1 ; Count this one stw r20,hwIgnored(r2) ; Save the ignored count b EatRupt ; Ignore it... ; ; System call ; .align 5 xcpSyscall: lis r20,hi16(EXT(shandler)) ; Assume this is a normal one, get handler address rlwinm r6,r0,1,0,31 ; Move sign bit to the end ori r20,r20,lo16(EXT(shandler)) ; Assume this is a normal one, get handler address bnl++ cr0,PassUp ; R0 not 0b10xxx...x, can not be any kind of magical system call, just pass it up... lwz r7,savesrr1+4(r13) ; Get the entering MSR (low half) lwz r1,dgFlags(0) ; Get the flags cmplwi cr2,r6,1 ; See if original R0 had the CutTrace request code in it rlwinm. r7,r7,0,MSR_PR_BIT,MSR_PR_BIT ; Did we come from user state? beq++ FCisok ; From supervisor state... rlwinm. r1,r1,0,enaUsrFCallb,enaUsrFCallb ; Are they valid? beq++ PassUp ; No, treat as a normal one... FCisok: beq++ cr2,EatRupt ; This is a CutTrace system call, we are done with it... ; ; Here is where we call the firmware. If it returns T_IN_VAIN, that means ; that it has handled the interruption. Remember: thou shalt not trash R13 ; while you are away. Anything else is ok. ; lwz r3,saver3+4(r13) ; Restore the first parameter b EXT(FirmwareCall) ; Go handle the firmware call.... ; ; Here is where we return from the firmware call ; .align 5 .globl EXT(FCReturn) LEXT(FCReturn) cmplwi r3,T_IN_VAIN ; Was it handled? beq++ EatRupt ; Interrupt was handled... mr r11,r3 ; Put the rupt code into the right register b Redrive ; Go through the filter again... ; ; Here is where we return from the PTE miss and segment exception handler ; .align 5 .globl EXT(PFSExit) LEXT(PFSExit) #if 0 mfsprg r2,0 ; (BRINGUP) lwz r0,savedsisr(r13) ; (BRINGUP) andis. r0,r0,hi16(dsiAC) ; (BRINGUP) beq++ didnthit ; (BRINGUP) lwz r0,20(0) ; (BRINGUP) mr. r0,r0 ; (BRINGUP) bne-- didnthit ; (BRINGUP) #if 0 li r0,1 ; (BRINGUP) stw r0,20(0) ; (BRINGUP) lis r0,hi16(Choke) ; (BRINGUP) ori r0,r0,lo16(Choke) ; (BRINGUP) sc ; (BRINGUP) #endif lwz r4,savesrr0+4(r13) ; (BRINGUP) lwz r8,savesrr1+4(r13) ; (BRINGUP) lwz r6,savedar+4(r13) ; (BRINGUP) rlwinm. r0,r8,0,MSR_IR_BIT,MSR_IR_BIT ; (BRINGUP) mfmsr r9 ; (BRINGUP) ori r0,r9,lo16(MASK(MSR_DR)) ; (BRINGUP) beq-- hghg ; (BRINGUP) mtmsr r0 ; (BRINGUP) isync ; (BRINGUP) hghg: lwz r5,0(r4) ; (BRINGUP) beq-- hghg1 ; (BRINGUP) mtmsr r9 ; (BRINGUP) isync ; (BRINGUP) hghg1: rlwinm r7,r5,6,26,31 ; (BRINGUP) rlwinm r27,r5,14,24,28 ; (BRINGUP) addi r3,r13,saver0+4 ; (BRINGUP) lwzx r3,r3,r27 ; (BRINGUP) #if 0 lwz r27,patcharea+4(r2) ; (BRINGUP) mr. r3,r3 ; (BRINGUP) bne++ nbnbnb ; (BRINGUP) addi r27,r27,1 ; (BRINGUP) stw r27,patcharea+4(r2) ; (BRINGUP) nbnbnb: #endif rlwinm. r28,r8,0,MSR_DR_BIT,MSR_DR_BIT ; (BRINGUP) rlwinm r27,r6,0,0,29 ; (BRINGUP) ori r28,r9,lo16(MASK(MSR_DR)) ; (BRINGUP) mfspr r10,dabr ; (BRINGUP) li r0,0 ; (BRINGUP) mtspr dabr,r0 ; (BRINGUP) cmplwi cr1,r7,31 ; (BRINGUP) beq-- qqq0 ; (BRINGUP) mtmsr r28 ; (BRINGUP) qqq0: isync ; (BRINGUP) lwz r27,0(r27) ; (BRINGUP) - Get original value bne cr1,qqq1 ; (BRINGUP) rlwinm r5,r5,31,22,31 ; (BRINGUP) cmplwi cr1,r5,151 ; (BRINGUP) beq cr1,qqq3 ; (BRINGUP) cmplwi cr1,r5,407 ; (BRINGUP) beq cr1,qqq2 ; (BRINGUP) cmplwi cr1,r5,215 ; (BRINGUP) beq cr1,qqq0q ; (BRINGUP) cmplwi cr1,r5,1014 ; (BRINGUP) beq cr1,qqqm1 ; (BRINGUP) lis r0,hi16(Choke) ; (BRINGUP) ori r0,r0,lo16(Choke) ; (BRINGUP) sc ; (BRINGUP) qqqm1: rlwinm r7,r6,0,0,26 ; (BRINGUP) stw r0,0(r7) ; (BRINGUP) stw r0,4(r7) ; (BRINGUP) stw r0,8(r7) ; (BRINGUP) stw r0,12(r7) ; (BRINGUP) stw r0,16(r7) ; (BRINGUP) stw r0,20(r7) ; (BRINGUP) stw r0,24(r7) ; (BRINGUP) stw r0,28(r7) ; (BRINGUP) b qqq9 qqq1: cmplwi r7,38 ; (BRINGUP) bgt qqq2 ; (BRINGUP) blt qqq3 ; (BRINGUP) qqq0q: stb r3,0(r6) ; (BRINGUP) b qqq9 ; (BRINGUP) qqq2: sth r3,0(r6) ; (BRINGUP) b qqq9 ; (BRINGUP) qqq3: stw r3,0(r6) ; (BRINGUP) qqq9: #if 0 rlwinm r7,r6,0,0,29 ; (BRINGUP) lwz r0,0(r7) ; (BRINGUP) - Get newest value #else lis r7,hi16(0x000792B8) ; (BRINGUP) ori r7,r7,lo16(0x000792B8) ; (BRINGUP) lwz r0,0(r7) ; (BRINGUP) - Get newest value #endif mtmsr r9 ; (BRINGUP) mtspr dabr,r10 ; (BRINGUP) isync ; (BRINGUP) #if 0 lwz r28,patcharea+12(r2) ; (BRINGUP) mr. r28,r28 ; (BRINGUP) bne++ qqq12 ; (BRINGUP) lis r28,0x4000 ; (BRINGUP) qqq12: stw r27,0(r28) ; (BRINGUP) lwz r6,savedar+4(r13) ; (BRINGUP) stw r0,4(r28) ; (BRINGUP) stw r4,8(r28) ; (BRINGUP) stw r6,12(r28) ; (BRINGUP) addi r28,r28,16 ; (BRINGUP) mr. r3,r3 ; (BRINGUP) stw r28,patcharea+12(r2) ; (BRINGUP) lwz r10,patcharea+8(r2) ; (BRINGUP) lwz r0,patcharea+4(r2) ; (BRINGUP) #endif #if 1 stw r0,patcharea(r2) ; (BRINGUP) #endif #if 0 xor r28,r0,r27 ; (BRINGUP) - See how much it changed rlwinm r28,r28,24,24,31 ; (BRINGUP) cmplwi r28,1 ; (BRINGUP) ble++ qqq10 ; (BRINGUP) mr r7,r0 ; (BRINGUP) li r0,1 ; (BRINGUP) stw r0,20(0) ; (BRINGUP) lis r0,hi16(Choke) ; (BRINGUP) ori r0,r0,lo16(Choke) ; (BRINGUP) sc ; (BRINGUP) #endif qqq10: addi r4,r4,4 ; (BRINGUP) stw r4,savesrr0+4(r13) ; (BRINGUP) li r11,T_IN_VAIN ; (BRINGUP) b EatRupt ; (BRINGUP) didnthit: ; (BRINGUP) #endif #if 0 lwz r0,20(0) ; (BRINGUP) mr. r0,r0 ; (BRINGUP) beq++ opopop ; (BRINGUP) li r0,0 ; (BRINGUP) stw r0,20(0) ; (BRINGUP) lis r0,hi16(Choke) ; (BRINGUP) ori r0,r0,lo16(Choke) ; (BRINGUP) sc ; (BRINGUP) opopop: #endif lwz r0,savesrr1+4(r13) ; Get the MSR in use at exception time cmplwi cr1,r11,T_IN_VAIN ; Was it handled? rlwinm. r4,r0,0,MSR_PR_BIT,MSR_PR_BIT ; Are we trapping from supervisor state? beq++ cr1,EatRupt ; Yeah, just blast back to the user... beq-- NoFamPf mfsprg r2,0 ; Get back per_proc lwz r1,spcFlags(r2) ; Load spcFlags rlwinm r1,r1,1+FamVMmodebit,30,31 ; Extract FamVMenabit and FamVMmodebit cmpi cr0,r1,2 ; Check FamVMena set without FamVMmode bne-- cr0,NoFamPf lwz r6,FAMintercept(r2) ; Load exceptions mask to intercept li r5,0 ; Clear srwi r1,r11,2 ; divide r11 by 4 oris r5,r5,0x8000 ; Set r5 to 0x80000000 srw r1,r5,r1 ; Set bit for current exception and. r1,r1,r6 ; And current exception with the intercept mask beq++ NoFamPf ; Is it FAM intercept bl EXT(vmm_fam_pf) b EatRupt NoFamPf: andi. r4,r0,lo16(MASK(MSR_RI)) ; See if the recover bit is on lis r0,0x8000 ; Get 0xFFFFFFFF80000000 add r0,r0,r0 ; Get 0xFFFFFFFF00000000 beq++ PassUpTrap ; Not on, normal case... ; ; Here is where we handle the "recovery mode" stuff. ; This is set by an emulation routine to trap any faults when it is fetching data or ; instructions. ; ; If we get a fault, we turn off RI, set CR0_EQ to false, bump the PC, and set R0 ; and R1 to the DAR and DSISR, respectively. ; lwz r3,savesrr0(r13) ; Get the failing instruction address lwz r4,savesrr0+4(r13) ; Get the failing instruction address lwz r5,savecr(r13) ; Get the condition register or r4,r4,r0 ; Fill the high part with foxes lwz r0,savedar(r13) ; Get the DAR addic r4,r4,4 ; Skip failing instruction lwz r6,savedar+4(r13) ; Get the DAR addze r3,r3 ; Propagate carry rlwinm r5,r5,0,3,1 ; Clear CR0_EQ to let emulation code know we failed lwz r7,savedsisr(r13) ; Grab the DSISR stw r3,savesrr0(r13) ; Save resume address stw r4,savesrr0+4(r13) ; Save resume address stw r5,savecr(r13) ; And the resume CR stw r0,saver0(r13) ; Pass back the DAR stw r6,saver0+4(r13) ; Pass back the DAR stw r7,saver1+4(r13) ; Pass back the DSISR b EatRupt ; Resume emulated code ; ; Here is where we handle the context switch firmware call. The old ; context has been saved. The new savearea is in kind of hokey, the high order ; half is stored in saver7 and the low half is in saver3. We will just ; muck around with the savearea pointers, and then join the exit routine ; .align 5 conswtch: li r0,0xFFF ; Get page boundary mr r29,r13 ; Save the save andc r30,r13,r0 ; Round down to page boundary (64-bit safe) lwz r5,saver3+4(r13) ; Switch to the new savearea bf-- pf64Bitb,xcswNo64 ; Not 64-bit... lwz r6,saver7+4(r13) ; Get the high order half sldi r6,r6,32 ; Position high half or r5,r5,r6 ; Merge them xcswNo64: lwz r30,SACvrswap+4(r30) ; get real to virtual translation mr r13,r5 ; Switch saveareas li r0,0 ; Clear this xor r27,r29,r30 ; Flip to virtual stw r0,saver3(r5) ; Push the new virtual savearea to the switch to routine stw r27,saver3+4(r5) ; Push the new virtual savearea to the switch to routine b EatRupt ; Start it up... ; ; Handle machine check here. ; ; ? ; .align 5 MachineCheck: bt++ pf64Bitb,mck64 ; ? lwz r27,savesrr1+4(r13) ; Pick up srr1 ; ; Check if the failure was in ; ml_probe_read. If so, this is expected, so modify the PC to ; ml_proble_read_mck and then eat the exception. ; lwz r30,savesrr0+4(r13) ; Get the failing PC lis r28,hi16(EXT(ml_probe_read_mck)) ; High order part lis r27,hi16(EXT(ml_probe_read)) ; High order part ori r28,r28,lo16(EXT(ml_probe_read_mck)) ; Get the low part ori r27,r27,lo16(EXT(ml_probe_read)) ; Get the low part cmplw r30,r28 ; Check highest possible cmplw cr1,r30,r27 ; Check lowest bge- PassUpTrap ; Outside of range blt- cr1,PassUpTrap ; Outside of range ; ; We need to fix up the BATs here because the probe ; routine messed them all up... As long as we are at it, ; fix up to return directly to caller of probe. ; lis r11,hi16(EXT(shadow_BAT)+shdDBAT) ; Get shadow address ori r11,r11,lo16(EXT(shadow_BAT)+shdDBAT) ; Get shadow address lwz r30,0(r11) ; Pick up DBAT 0 high lwz r28,4(r11) ; Pick up DBAT 0 low lwz r27,8(r11) ; Pick up DBAT 1 high lwz r18,16(r11) ; Pick up DBAT 2 high lwz r11,24(r11) ; Pick up DBAT 3 high sync mtdbatu 0,r30 ; Restore DBAT 0 high mtdbatl 0,r28 ; Restore DBAT 0 low mtdbatu 1,r27 ; Restore DBAT 1 high mtdbatu 2,r18 ; Restore DBAT 2 high mtdbatu 3,r11 ; Restore DBAT 3 high sync lwz r28,savelr+4(r13) ; Get return point lwz r27,saver0+4(r13) ; Get the saved MSR li r30,0 ; Get a failure RC stw r28,savesrr0+4(r13) ; Set the return point stw r27,savesrr1+4(r13) ; Set the continued MSR stw r30,saver3+4(r13) ; Set return code b EatRupt ; Yum, yum, eat it all up... ; ; 64-bit machine checks ; mck64: ; ; NOTE: WE NEED TO RETHINK RECOVERABILITY A BIT - radar 3167190 ; ld r23,savesrr0(r13) ; Grab the SRR0 in case we need bad instruction ld r20,savesrr1(r13) ; Grab the SRR1 so we can decode the thing lwz r21,savedsisr(r13) ; We might need this in a bit ld r22,savedar(r13) ; We might need this in a bit lis r8,AsyMCKSrc ; Get the Async MCK Source register address mfsprg r19,2 ; Get the feature flags ori r8,r8,0x8000 ; Set to read data rlwinm. r0,r19,0,pfSCOMFixUpb,pfSCOMFixUpb ; Do we need to fix the SCOM data? sync mtspr scomc,r8 ; Request the MCK source mfspr r24,scomd ; Get the source mfspr r8,scomc ; Get back the status (we just ignore it) sync isync lis r8,AsyMCKRSrc ; Get the Async MCK Source AND mask address li r9,0 ; Get and AND mask of 0 sync mtspr scomd,r9 ; Set the AND mask to 0 mtspr scomc,r8 ; Write the AND mask and clear conditions mfspr r8,scomc ; Get back the status (we just ignore it) sync isync lis r8,cFIR ; Get the Core FIR register address ori r8,r8,0x8000 ; Set to read data sync mtspr scomc,r8 ; Request the Core FIR mfspr r25,scomd ; Get the source mfspr r8,scomc ; Get back the status (we just ignore it) sync isync lis r8,cFIRrst ; Get the Core FIR AND mask address sync mtspr scomd,r9 ; Set the AND mask to 0 mtspr scomc,r8 ; Write the AND mask and clear conditions mfspr r8,scomc ; Get back the status (we just ignore it) sync isync lis r8,l2FIR ; Get the L2 FIR register address ori r8,r8,0x8000 ; Set to read data sync mtspr scomc,r8 ; Request the L2 FIR mfspr r26,scomd ; Get the source mfspr r8,scomc ; Get back the status (we just ignore it) sync isync lis r8,l2FIRrst ; Get the L2 FIR AND mask address sync mtspr scomd,r9 ; Set the AND mask to 0 mtspr scomc,r8 ; Write the AND mask and clear conditions mfspr r8,scomc ; Get back the status (we just ignore it) sync isync lis r8,busFIR ; Get the Bus FIR register address ori r8,r8,0x8000 ; Set to read data sync mtspr scomc,r8 ; Request the Bus FIR mfspr r27,scomd ; Get the source mfspr r8,scomc ; Get back the status (we just ignore it) sync isync lis r8,busFIRrst ; Get the Bus FIR AND mask address sync mtspr scomd,r9 ; Set the AND mask to 0 mtspr scomc,r8 ; Write the AND mask and clear conditions mfspr r8,scomc ; Get back the status (we just ignore it) sync isync ; Note: bug in early chips where scom reads are shifted right by 1. We fix that here. ; Also note that we will lose bit 63 beq++ mckNoFix ; No fix up is needed sldi r24,r24,1 ; Shift left 1 sldi r25,r25,1 ; Shift left 1 sldi r26,r26,1 ; Shift left 1 sldi r27,r27,1 ; Shift left 1 mckNoFix: std r24,savexdat0(r13) ; Save the MCK source in case we pass the error std r25,savexdat1(r13) ; Save the Core FIR in case we pass the error std r26,savexdat2(r13) ; Save the L2 FIR in case we pass the error std r27,savexdat3(r13) ; Save the BUS FIR in case we pass the error rlwinm. r0,r20,0,mckIFUE-32,mckIFUE-32 ; Is this some kind of uncorrectable? bne mckUE ; Yeah... rlwinm. r0,r20,0,mckLDST-32,mckLDST-32 ; Some kind of load/store error? bne mckHandleLDST ; Yes... rldicl. r0,r20,46,62 ; Get the error cause code beq mckNotSure ; We need some more checks for this one... cmplwi r0,2 ; Check for TLB parity error blt mckSLBparity ; This is an SLB parity error... bgt mckhIFUE ; This is an IFetch tablewalk reload UE... ; IFetch TLB parity error isync tlbiel r23 ; Locally invalidate TLB entry for iaddr sync ; Wait for it b ceMck ; All recovered... ; SLB parity error. This could be software caused. We get one if there is ; more than 1 valid SLBE with a matching ESID. That one we do not want to ; try to recover from. Search for it and if we get it, panic. mckSLBparity: crclr cr0_eq ; Make sure we are not equal so we take correct exit la r3,emvr0(r2) ; Use this to keep track of valid ESIDs we find li r5,0 ; Start with index 0 mckSLBck: la r4,emvr0(r2) ; Use this to keep track of valid ESIDs we find slbmfee r6,r5 ; Get the next SLBE andis. r0,r6,0x0800 ; See if valid bit is on beq mckSLBnx ; Skip invalid and go to next mckSLBck2: cmpld r4,r3 ; Have we reached the end of the table? beq mckSLBne ; Yes, go enter this one... ld r7,0(r4) ; Pick up the saved ESID cmpld r6,r7 ; Is this a match? beq mckSLBrec ; Whoops, I did bad, recover and pass up... addi r4,r4,8 ; Next table entry b mckSLBck2 ; Check the next... mckSLBnx: addi r5,r5,1 ; Point to next SLBE cmplwi r5,64 ; Have we checked all of them? bne++ mckSLBck ; Not yet, check again... b mckSLBrec ; We looked at them all, go recover... mckSLBne: std r6,0(r3) ; Save this ESID addi r3,r3,8 ; Point to the new slot b mckSLBnx ; Go do the next SLBE... ; Recover an SLB error mckSLBrec: li r0,0 ; Set an SLB slot index of 0 slbia ; Trash all SLB entries (except for entry 0 that is) slbmfee r7,r0 ; Get the entry that is in SLB index 0 rldicr r7,r7,0,35 ; Clear the valid bit and the rest slbie r7 ; Invalidate it li r3,0 ; Set the first SLBE mckSLBclr: slbmte r0,r3 ; Clear the whole entry to 0s addi r3,r3,1 ; Bump index cmplwi cr1,r3,64 ; Have we done them all? bne++ cr1,mckSLBclr ; Yup.... sth r3,ppInvSeg(r2) ; Store non-zero to trigger SLB reload bne++ ceMck ; This was not a programming error, all recovered... b ueMck ; Pass the software error up... ; ; Handle a load/store unit error. We need to decode the DSISR ; mckHandleLDST: rlwinm. r0,r21,0,mckL1DCPE,mckL1DCPE ; An L1 data cache parity error? bne++ mckL1D ; Yeah, we dealt with this back in the vector... rlwinm. r0,r21,0,mckL1DTPE,mckL1DTPE ; An L1 tag error? bne++ mckL1T ; Yeah, we dealt with this back in the vector... rlwinm. r0,r21,0,mckUEdfr,mckUEdfr ; Is the a "deferred" UE? bne mckDUE ; Yeah, go see if expected... rlwinm. r0,r21,0,mckUETwDfr,mckUETwDfr ; Is the a "deferred" tablewalk UE? bne mckDTW ; Yeah, no recovery... rlwinm. r0,r21,0,mckSLBPE,mckSLBPE ; SLB parity error? bne mckSLBparity ; Yeah, go attempt recovery.... ; This is a recoverable D-ERAT or TLB error la r9,hwMckERCPE(r2) ; Get DERAT parity error count mckInvDAR: isync tlbiel r22 ; Locally invalidate the TLB entry sync lwz r21,0(r9) ; Get count addi r21,r21,1 ; Count this one stw r21,0(r9) ; Stick it back b ceMck ; All recovered... ; ; When we come here, we are not quite sure what the error is. We need to ; dig a bit further. ; ; R24 is interrupt source ; R25 is Core FIR ; ; Note that both have been cleared already. ; mckNotSure: rldicl. r0,r24,AsyMCKfir+1,63 ; Something in the FIR? bne-- mckFIR ; Yup, go check some more... rldicl. r0,r24,AsyMCKhri+1,63 ; Hang recovery? bne-- mckHangRcvr ; Yup... rldicl. r0,r24,AsyMCKext+1,63 ; External signal? bne-- mckExtMck ; Yup... ; ; We really do not know what this one is or what to do with it... ; mckUnk: lwz r21,hwMckUnk(r2) ; Get unknown error count addi r21,r21,1 ; Count it stw r21,hwMckUnk(r2) ; Stuff it b ueMck ; Go south, young man... ; ; Hang recovery. This is just a notification so we only count. ; mckHangRcrvr: lwz r21,hwMckHang(r2) ; Get hang recovery count addi r21,r21,1 ; Count this one stw r21,hwMckHang(r2) ; Stick it back b ceMck ; All recovered... ; ; Externally signaled MCK. No recovery for the moment, but we this may be ; where we handle ml_probe_read problems eventually. ; mckExtMck: lwz r21,hwMckHang(r2) ; Get hang recovery count addi r21,r21,1 ; Count this one stw r21,hwMckHang(r2) ; Stick it back b ceMck ; All recovered... ; ; Machine check cause is in a FIR. Suss it out here. ; Core FIR is in R25 and has been cleared in HW. ; mckFIR: rldicl. r0,r25,cFIRICachePE+1,63 ; I-Cache parity error? la r19,hwMckICachePE(r2) ; Point to counter bne mckInvICache ; Go invalidate I-Cache... rldicl. r0,r25,cFIRITagPE0+1,63 ; I-Cache tag parity error? la r19,hwMckITagPE(r2) ; Point to counter bne mckInvICache ; Go invalidate I-Cache... rldicl. r0,r25,cFIRITagPE1+1,63 ; I-Cache tag parity error? la r19,hwMckITagPE(r2) ; Point to counter bne mckInvICache ; Go invalidate I-Cache... rldicl. r0,r25,cFIRIEratPE+1,63 ; IERAT parity error? la r19,hwMckIEratPE(r2) ; Point to counter bne mckInvERAT ; Go invalidate ERATs... rldicl. r0,r25,cFIRIFUL2UE+1,63 ; IFetch got L2 UE? bne mckhIFUE ; Go count and pass up... rldicl. r0,r25,cFIRDCachePE+1,63 ; D-Cache PE? bne mckL1D ; Handled, just go count... rldicl. r0,r25,cFIRDTagPE+1,63 ; D-Cache tag PE? bne mckL1T ; Handled, just go count... rldicl. r0,r25,cFIRDEratPE+1,63 ; DERAT PE? la r19,hwMckDEratPE(r2) ; Point to counter bne mckInvERAT ; Go invalidate ERATs... rldicl. r0,r25,cFIRTLBPE+1,63 ; TLB PE? la r9,hwMckTLBPE(r2) ; Get TLB parity error count bne mckInvDAR ; Go recover... rldicl. r0,r25,cFIRSLBPE+1,63 ; SLB PE? bne mckSLBparity ; Cope with it... b mckUnk ; Have not a clue... ; ; General recovery for I-Cache errors. Just flush it completely. ; .align 7 ; Force into cache line mckInvICache: lis r0,0x0080 ; Get a 0x0080 (bit 9 >> 32) mfspr r21,hid1 ; Get the current HID1 sldi r0,r0,32 ; Get the "forced ICBI match" bit or r0,r0,r21 ; Set forced match isync mtspr hid1,r0 ; Stick it mtspr hid1,r0 ; Stick it again isync li r6,0 ; Start at 0 mckIcbi: icbi 0,r6 ; Kill I$ addi r6,r6,128 ; Next line andis. r5,r6,1 ; Have we done them all? beq++ mckIcbi ; Not yet... isync mtspr hid1,r21 ; Restore original HID1 mtspr hid1,r21 ; Stick it again isync lwz r5,0(r19) ; Get the counter addi r5,r5,1 ; Count it stw r5,0(r19) ; Stuff it back b ceMck ; All recovered... ; General recovery for ERAT problems - handled in exception vector already mckInvERAT: lwz r21,0(r19) ; Get the exception count spot addi r21,r21,1 ; Count this one stw r21,0(r19) ; Save count b ceMck ; All recovered... ; General hang recovery - this is a notification only, just count. mckHangRcvr: lwz r21,hwMckHang(r2) ; Get hang recovery count addi r21,r21,1 ; Count this one stw r21,hwMckHang(r2) ; Stick it back b ceMck ; All recovered... ; ; These are the uncorrectable errors, just count them then pass it along. ; mckUE: lwz r21,hwMckUE(r2) ; Get general uncorrectable error count addi r21,r21,1 ; Count it stw r21,hwMckUE(r2) ; Stuff it b ueMck ; Go south, young man... mckhIFUE: lwz r21,hwMckIUEr(r2) ; Get I-Fetch TLB reload uncorrectable error count addi r21,r21,1 ; Count it stw r21,hwMckIUEr(r2) ; Stuff it b ueMck ; Go south, young man... mckDUE: lwz r21,hwMckDUE(r2) ; Get deferred uncorrectable error count addi r21,r21,1 ; Count it stw r21,hwMckDUE(r2) ; Stuff it ; ; Right here is where we end up after a failure on a ml_probe_read_64. ; We will check if that is the case, and if so, fix everything up and ; return from it. lis r8,hi16(EXT(ml_probe_read_64)) ; High of start lis r9,hi16(EXT(ml_probe_read_mck_64)) ; High of end ori r8,r8,lo16(EXT(ml_probe_read_64)) ; Low of start ori r9,r9,lo16(EXT(ml_probe_read_mck_64)) ; Low of end cmpld r23,r8 ; Too soon? cmpld cr1,r23,r9 ; Too late? cror cr0_lt,cr0_lt,cr1_gt ; Too soon or too late? ld r3,saver12(r13) ; Get the original MSR ld r5,savelr(r13) ; Get the return address li r4,0 ; Get fail code blt-- ueMck ; This is a normal machine check, just pass up... std r5,savesrr0(r13) ; Set the return MSR std r3,savesrr1(r13) ; Set the return address std r4,saver3(r13) ; Set failure return code b ceMck ; All recovered... mckDTW: lwz r21,hwMckDTW(r2) ; Get deferred tablewalk uncorrectable error count addi r21,r21,1 ; Count it stw r21,hwMckDTW(r2) ; Stuff it b ueMck ; Go south, young man... mckL1D: lwz r21,hwMckL1DPE(r2) ; Get data cache parity error count addi r21,r21,1 ; Count it stw r21,hwMckL1DPE(r2) ; Stuff it b ceMck ; All recovered... mckL1T: lwz r21,hwMckL1TPE(r2) ; Get TLB parity error count addi r21,r21,1 ; Count it stw r21,hwMckL1TPE(r2) ; Stuff it ceMck: lwz r21,mckFlags(0) ; Get the flags li r0,1 ; Set the recovered flag before passing up rlwinm. r21,r21,0,31,31 ; Check if we want to log recoverables stw r0,savemisc3(r13) ; Set it beq++ EatRupt ; No log of recoverables wanted... b PassUpTrap ; Go up and log error... ueMck: li r0,0 ; Set the unrecovered flag before passing up stw r0,savemisc3(r13) ; Set it b PassUpTrap ; Go up and log error and probably panic /* * Here is where we come back from some instruction emulator. If we come back with * T_IN_VAIN, the emulation is done and we should just reload state and directly * go back to the interrupted code. Otherwise, we will check to see if * we need to redrive with a different interrupt, i.e., DSI. * Note that this we are actually not redriving the rupt, rather changing it * into a different one. Thus we clear the redrive bit. */ .align 5 .globl EXT(EmulExit) LEXT(EmulExit) cmplwi cr1,r11,T_IN_VAIN ; Was it emulated? lis r1,hi16(SAVredrive) ; Get redrive request beq++ cr1,EatRupt ; Yeah, just blast back to the user... lwz r4,SAVflags(r13) ; Pick up the flags and. r0,r4,r1 ; Check if redrive requested beq++ PassUpTrap ; No redrive, just keep on going... b Redrive ; Redrive the exception... ; ; Jump into main handler code switching on VM at the same time. ; ; We assume kernel data is mapped contiguously in physical ; memory, otherwise we would need to switch on (at least) virtual data. ; SRs are already set up. ; .align 5 PassUpTrap: lis r20,hi16(EXT(thandler)) ; Get thandler address ori r20,r20,lo16(EXT(thandler)) ; Get thandler address b PassUp ; Go pass it up... PassUpRupt: lis r20,hi16(EXT(ihandler)) ; Get ihandler address ori r20,r20,lo16(EXT(ihandler)) ; Get ihandler address b PassUp ; Go pass it up... .align 5 PassUpFPU: lis r20,hi16(EXT(fpu_switch)) ; Get FPU switcher address ori r20,r20,lo16(EXT(fpu_switch)) ; Get FPU switcher address b PassUp ; Go pass it up... PassUpVMX: lis r20,hi16(EXT(vec_switch)) ; Get VMX switcher address ori r20,r20,lo16(EXT(vec_switch)) ; Get VMX switcher address bt++ featAltivec,PassUp ; We have VMX on this CPU... li r11,T_PROGRAM ; Say that it is a program exception li r20,8 ; Set invalid instruction stw r11,saveexception(r13) ; Set the new the exception code sth r20,savesrr1+4(r13) ; Set the invalid instruction SRR code b PassUpTrap ; Go pass it up... .align 5 PassUpAbend: lis r20,hi16(EXT(chandler)) ; Get choke handler address ori r20,r20,lo16(EXT(chandler)) ; Get choke handler address b PassUp ; Go pass it up... .align 5 PassUp: #if INSTRUMENT mfspr r29,pmc1 ; INSTRUMENT - saveinstr[11] - Take stamp at passup or eatrupt stw r29,0x6100+(11*16)+0x0(0) ; INSTRUMENT - Save it mfspr r29,pmc2 ; INSTRUMENT - Get stamp stw r29,0x6100+(11*16)+0x4(0) ; INSTRUMENT - Save it mfspr r29,pmc3 ; INSTRUMENT - Get stamp stw r29,0x6100+(11*16)+0x8(0) ; INSTRUMENT - Save it mfspr r29,pmc4 ; INSTRUMENT - Get stamp stw r29,0x6100+(11*16)+0xC(0) ; INSTRUMENT - Save it #endif lwz r10,SAVflags(r13) ; Pick up the flags li r0,0xFFF ; Get a page mask li r2,MASK(MSR_BE)|MASK(MSR_SE) ; Get the mask to save trace bits andc r5,r13,r0 ; Back off to the start of savearea block mfmsr r3 ; Get our MSR rlwinm r10,r10,0,SAVredriveb+1,SAVredriveb-1 ; Clear the redrive before we pass it up li r21,MSR_SUPERVISOR_INT_OFF ; Get our normal MSR value and r3,r3,r2 ; Clear all but trace lwz r5,SACvrswap+4(r5) ; Get real to virtual conversion or r21,r21,r3 ; Keep the trace bits if they are on stw r10,SAVflags(r13) ; Set the flags with the cleared redrive flag xor r4,r13,r5 ; Pass up the virtual address of context savearea mfsprg r29,0 ; Get the per_proc block back rlwinm r4,r4,0,0,31 ; Clean top half of virtual savearea if 64-bit mr r3,r21 ; Pass in the MSR we will go to bl EXT(switchSegs) ; Go handle the segment registers/STB #if INSTRUMENT mfspr r30,pmc1 ; INSTRUMENT - saveinstr[7] - Take stamp afer switchsegs stw r30,0x6100+(7*16)+0x0(0) ; INSTRUMENT - Save it mfspr r30,pmc2 ; INSTRUMENT - Get stamp stw r30,0x6100+(7*16)+0x4(0) ; INSTRUMENT - Save it mfspr r30,pmc3 ; INSTRUMENT - Get stamp stw r30,0x6100+(7*16)+0x8(0) ; INSTRUMENT - Save it mfspr r30,pmc4 ; INSTRUMENT - Get stamp stw r30,0x6100+(7*16)+0xC(0) ; INSTRUMENT - Save it #endif lwz r3,saveexception(r13) ; Recall the exception code mtsrr0 r20 ; Set up the handler address mtsrr1 r21 ; Set up our normal MSR value bt++ pf64Bitb,puLaunch ; Handle 64-bit machine... rfi ; Launch the exception handler puLaunch: rfid ; Launch the exception handler /* * This routine is the main place where we return from an interruption. * * This is also where we release the quickfret list. These are saveareas * that were released as part of the exception exit path in hw_exceptions. * In order to save an atomic operation (which actually will not work * properly on a 64-bit machine) we use holdQFret to indicate that the list * is in flux and should not be looked at here. This comes into play only * when we take a PTE miss when we are queuing a savearea onto qfret. * Quite rare but could happen. If the flag is set, this code does not * release the list and waits until next time. * * All we need to remember here is that R13 must point to the savearea * that has the context we need to load up. Translation and interruptions * must be disabled. * * This code always loads the context in the savearea pointed to * by R13. In the process, it throws away the savearea. If there * is any tomfoolery with savearea stacks, it must be taken care of * before we get here. * */ .align 5 EatRupt: mfsprg r29,0 ; Get the per_proc block back mr r31,r13 ; Move the savearea pointer to the far end of the register set mfsprg r27,2 ; Get the processor features lwz r3,holdQFret(r29) ; Get the release hold off flag bt++ pf64Bitb,eat64a ; Skip down to the 64-bit version of this ; ; This starts the 32-bit version ; mr. r3,r3 ; Should we hold off the quick release? lwz r30,quickfret+4(r29) ; Pick up the quick fret list, if any la r21,saver0(r31) ; Point to the first thing we restore bne- ernoqfret ; Hold off set, do not release just now... erchkfret: mr. r3,r30 ; Any savearea to quickly release? beq+ ernoqfret ; No quickfrets... lwz r30,SAVprev+4(r30) ; Chain back now bl EXT(save_ret_phys) ; Put it on the free list stw r30,quickfret+4(r29) ; Dequeue previous guy (really, it is ok to wait until after the release) b erchkfret ; Try the next one... .align 5 ernoqfret: #if INSTRUMENT mfspr r30,pmc1 ; INSTRUMENT - saveinstr[5] - Take stamp at saveareas released stw r30,0x6100+(5*16)+0x0(0) ; INSTRUMENT - Save it mfspr r30,pmc2 ; INSTRUMENT - Get stamp stw r30,0x6100+(5*16)+0x4(0) ; INSTRUMENT - Save it mfspr r30,pmc3 ; INSTRUMENT - Get stamp stw r30,0x6100+(5*16)+0x8(0) ; INSTRUMENT - Save it mfspr r30,pmc4 ; INSTRUMENT - Get stamp stw r30,0x6100+(5*16)+0xC(0) ; INSTRUMENT - Save it #endif dcbt 0,r21 ; Touch in the first thing we need ; ; Here we release the savearea. ; ; Important!!!! The savearea is released before we are done with it. When the ; local free savearea list (anchored at lclfree) gets too long, save_ret_phys ; will trim the list, making the extra saveareas allocatable by another processor ; The code in there must ALWAYS leave our savearea on the local list, otherwise ; we could be very, very unhappy. The code there always queues the "just released" ; savearea to the head of the local list. Then, if it needs to trim, it will ; start with the SECOND savearea, leaving ours intact. ; ; mr r3,r31 ; Get the exiting savearea in parm register bl EXT(save_ret_phys) ; Put it on the free list #if INSTRUMENT mfspr r3,pmc1 ; INSTRUMENT - saveinstr[6] - Take stamp afer savearea released stw r3,0x6100+(6*16)+0x0(0) ; INSTRUMENT - Save it mfspr r3,pmc2 ; INSTRUMENT - Get stamp stw r3,0x6100+(6*16)+0x4(0) ; INSTRUMENT - Save it mfspr r3,pmc3 ; INSTRUMENT - Get stamp stw r3,0x6100+(6*16)+0x8(0) ; INSTRUMENT - Save it mfspr r3,pmc4 ; INSTRUMENT - Get stamp stw r3,0x6100+(6*16)+0xC(0) ; INSTRUMENT - Save it #endif lwz r3,savesrr1+4(r31) ; Pass in the MSR we are going to bl EXT(switchSegs) ; Go handle the segment registers/STB #if INSTRUMENT mfspr r30,pmc1 ; INSTRUMENT - saveinstr[10] - Take stamp afer switchsegs stw r30,0x6100+(10*16)+0x0(0) ; INSTRUMENT - Save it mfspr r30,pmc2 ; INSTRUMENT - Get stamp stw r30,0x6100+(10*16)+0x4(0) ; INSTRUMENT - Save it mfspr r30,pmc3 ; INSTRUMENT - Get stamp stw r30,0x6100+(10*16)+0x8(0) ; INSTRUMENT - Save it mfspr r30,pmc4 ; INSTRUMENT - Get stamp stw r30,0x6100+(10*16)+0xC(0) ; INSTRUMENT - Save it #endif li r3,savesrr1+4 ; Get offset to the srr1 value lhz r9,PP_CPU_FLAGS(r29) ; Get the processor flags lwarx r26,r3,r31 ; Get destination MSR and take reservation along the way (just so we can blow it away) rlwinm r25,r26,27,22,22 ; Move PR bit to BE cmplw cr3,r14,r14 ; Set that we do not need to stop streams rlwinm r9,r9,(((31-MSR_BE_BIT)+(traceBEb+16+1))&31),MSR_BE_BIT,MSR_BE_BIT ; Set BE bit if special trace is on li r21,emfp0 ; Point to the fp savearea and r9,r9,r25 ; Clear BE if supervisor state or r26,r26,r9 ; Flip on the BE bit for special trace if needed stwcx. r26,r3,r31 ; Blow away any reservations we hold (and set BE) lwz r25,savesrr0+4(r31) ; Get the SRR0 to use la r28,saver4(r31) ; Point to the 32-byte line with r4-r7 dcbz r21,r29 ; Clear a work area lwz r0,saver0+4(r31) ; Restore R0 dcbt 0,r28 ; Touch in r4-r7 lwz r1,saver1+4(r31) ; Restore R1 lwz r2,saver2+4(r31) ; Restore R2 la r28,saver8(r31) ; Point to the 32-byte line with r8-r11 lwz r3,saver3+4(r31) ; Restore R3 andis. r6,r27,hi16(pfAltivec) ; Do we have altivec on the machine? dcbt 0,r28 ; touch in r8-r11 lwz r4,saver4+4(r31) ; Restore R4 la r28,saver12(r31) ; Point to the 32-byte line with r12-r15 mtsrr0 r25 ; Restore the SRR0 now lwz r5,saver5+4(r31) ; Restore R5 mtsrr1 r26 ; Restore the SRR1 now lwz r6,saver6+4(r31) ; Restore R6 dcbt 0,r28 ; touch in r12-r15 la r28,saver16(r31) lwz r7,saver7+4(r31) ; Restore R7 lwz r8,saver8+4(r31) ; Restore R8 lwz r9,saver9+4(r31) ; Restore R9 dcbt 0,r28 ; touch in r16-r19 la r28,saver20(r31) lwz r10,saver10+4(r31) ; Restore R10 lwz r11,saver11+4(r31) ; Restore R11 dcbt 0,r28 ; touch in r20-r23 la r28,savevscr(r31) ; Point to the status area lwz r12,saver12+4(r31) ; Restore R12 lwz r13,saver13+4(r31) ; Restore R13 la r14,savectr+4(r31) dcbt 0,r28 ; Touch in VSCR and FPSCR dcbt 0,r14 ; touch in CTR, DAR, DSISR, VRSAVE, and Exception code lwz r26,next_savearea+4(r29) ; Get the exception save area la r28,saver24(r31) lwz r14,saver14+4(r31) ; Restore R14 lwz r15,saver15+4(r31) ; Restore R15 stfd f0,emfp0(r29) ; Save FP0 lwz r27,savevrsave(r31) ; Get the vrsave dcbt 0,r28 ; touch in r24-r27 la r28,savevscr(r31) ; Point to the status area lfd f0,savefpscrpad(r31) ; Get the fpscr la r22,saver28(r31) mtfsf 0xFF,f0 ; Restore fpscr lfd f0,emfp0(r29) ; Restore the used register beq noavec3 ; No Altivec on this CPU... stvxl v0,r21,r29 ; Save a vector register lvxl v0,0,r28 ; Get the vector status mtspr vrsave,r27 ; Set the vrsave mtvscr v0 ; Set the vector status lvxl v0,r21,r29 ; Restore work vector register noavec3: dcbt 0,r22 ; touch in r28-r31 lwz r23,spcFlags(r29) ; Get the special flags from per_proc la r17,savesrr0(r31) la r26,saver0(r26) ; Point to the first part of the next savearea dcbt 0,r17 ; touch in SRR0, SRR1, CR, XER, LR lhz r28,pfrptdProc(r29) ; Get the reported processor type lwz r16,saver16+4(r31) ; Restore R16 lwz r17,saver17+4(r31) ; Restore R17 lwz r18,saver18+4(r31) ; Restore R18 lwz r19,saver19+4(r31) ; Restore R19 lwz r20,saver20+4(r31) ; Restore R20 lwz r21,saver21+4(r31) ; Restore R21 lwz r22,saver22+4(r31) ; Restore R22 cmpwi cr1,r28,CPU_SUBTYPE_POWERPC_750 ; G3? dcbz 0,r26 ; Clear and allocate next savearea we use in the off chance it is still in when we next interrupt andis. r23,r23,hi16(perfMonitor) ; Is the performance monitor enabled? lwz r23,saver23+4(r31) ; Restore R23 cmpwi cr2,r28,CPU_SUBTYPE_POWERPC_7400 ; Yer standard G4? lwz r24,saver24+4(r31) ; Restore R24 lwz r25,saver25+4(r31) ; Restore R25 lwz r26,saver26+4(r31) ; Restore R26 lwz r27,saver27+4(r31) ; Restore R27 beq+ noPerfMonRestore32 ; No perf monitor... beq- cr1,perfMonRestore32_750 ; This is a G3... beq- cr2,perfMonRestore32_7400 ; Standard G4... lwz r28,savepmc+16(r31) lwz r29,savepmc+20(r31) mtspr pmc5,r28 ; Restore PMC5 mtspr pmc6,r29 ; Restore PMC6 perfMonRestore32_7400: lwz r28,savemmcr2+4(r31) mtspr mmcr2,r28 ; Restore MMCR2 perfMonRestore32_750: lwz r28,savepmc+0(r31) lwz r29,savepmc+4(r31) mtspr pmc1,r28 ; Restore PMC1 mtspr pmc2,r29 ; Restore PMC2 lwz r28,savepmc+8(r31) lwz r29,savepmc+12(r31) mtspr pmc3,r28 ; Restore PMC3 mtspr pmc4,r29 ; Restore PMC4 lwz r28,savemmcr1+4(r31) lwz r29,savemmcr0+4(r31) mtspr mmcr1,r28 ; Restore MMCR1 mtspr mmcr0,r29 ; Restore MMCR0 noPerfMonRestore32: lwz r28,savecr(r31) ; Get CR to restore lwz r29,savexer+4(r31) ; Get XER to restore mtcr r28 ; Restore the CR lwz r28,savelr+4(r31) ; Get LR to restore mtxer r29 ; Restore the XER lwz r29,savectr+4(r31) ; Get the CTR to restore mtlr r28 ; Restore the LR lwz r28,saver30+4(r31) ; Get R30 mtctr r29 ; Restore the CTR lwz r29,saver31+4(r31) ; Get R31 mtsprg 2,r28 ; Save R30 for later lwz r28,saver28+4(r31) ; Restore R28 mtsprg 3,r29 ; Save R31 for later lwz r29,saver29+4(r31) ; Restore R29 mfsprg r31,0 ; Get per_proc mfsprg r30,2 ; Restore R30 lwz r31,pfAvailable(r31) ; Get the feature flags mtsprg 2,r31 ; Set the feature flags mfsprg r31,3 ; Restore R31 rfi ; Click heels three times and think very hard that there is no place like home... .long 0 ; Leave this here .long 0 .long 0 .long 0 .long 0 .long 0 .long 0 .long 0 ; ; This starts the 64-bit version ; .align 7 eat64a: ld r30,quickfret(r29) ; Pick up the quick fret list, if any mr. r3,r3 ; Should we hold off the quick release? la r21,saver0(r31) ; Point to the first thing we restore bne-- ernoqfre64 ; Hold off set, do not release just now... erchkfre64: mr. r3,r30 ; Any savearea to quickly release? beq+ ernoqfre64 ; No quickfrets... ld r30,SAVprev(r30) ; Chain back now bl EXT(save_ret_phys) ; Put it on the free list std r30,quickfret(r29) ; Dequeue previous guy (really, it is ok to wait until after the release) b erchkfre64 ; Try the next one... .align 7 ernoqfre64: dcbt 0,r21 ; Touch in the first thing we need ; ; Here we release the savearea. ; ; Important!!!! The savearea is released before we are done with it. When the ; local free savearea list (anchored at lclfree) gets too long, save_ret_phys ; will trim the list, making the extra saveareas allocatable by another processor ; The code in there must ALWAYS leave our savearea on the local list, otherwise ; we could be very, very unhappy. The code there always queues the "just released" ; savearea to the head of the local list. Then, if it needs to trim, it will ; start with the SECOND savearea, leaving ours intact. ; ; li r3,lgKillResv ; Get spot to kill reservation stdcx. r3,0,r3 ; Blow away any reservations we hold mr r3,r31 ; Get the exiting savearea in parm register bl EXT(save_ret_phys) ; Put it on the free list lwz r3,savesrr1+4(r31) ; Pass in the MSR we will be going to bl EXT(switchSegs) ; Go handle the segment registers/STB lhz r9,PP_CPU_FLAGS(r29) ; Get the processor flags ld r26,savesrr1(r31) ; Get destination MSR cmplw cr3,r14,r14 ; Set that we do not need to stop streams rlwinm r25,r26,27,22,22 ; Move PR bit to BE rlwinm r9,r9,(((31-MSR_BE_BIT)+(traceBEb+16+1))&31),MSR_BE_BIT,MSR_BE_BIT ; Set BE bit if special trace is on li r21,emfp0 ; Point to a workarea and r9,r9,r25 ; Clear BE if supervisor state or r26,r26,r9 ; Flip on the BE bit for special trace if needed ld r25,savesrr0(r31) ; Get the SRR0 to use la r28,saver16(r31) ; Point to the 128-byte line with r16-r31 dcbz128 r21,r29 ; Clear a work area ld r0,saver0(r31) ; Restore R0 dcbt 0,r28 ; Touch in r16-r31 ld r1,saver1(r31) ; Restore R1 ld r2,saver2(r31) ; Restore R2 ld r3,saver3(r31) ; Restore R3 mtcrf 0x80,r27 ; Get facility availability flags (do not touch CR1-7) ld r4,saver4(r31) ; Restore R4 mtsrr0 r25 ; Restore the SRR0 now ld r5,saver5(r31) ; Restore R5 mtsrr1 r26 ; Restore the SRR1 now ld r6,saver6(r31) ; Restore R6 ld r7,saver7(r31) ; Restore R7 ld r8,saver8(r31) ; Restore R8 ld r9,saver9(r31) ; Restore R9 la r28,savevscr(r31) ; Point to the status area ld r10,saver10(r31) ; Restore R10 ld r11,saver11(r31) ; Restore R11 ld r12,saver12(r31) ; Restore R12 ld r13,saver13(r31) ; Restore R13 ld r26,next_savearea(r29) ; Get the exception save area ld r14,saver14(r31) ; Restore R14 ld r15,saver15(r31) ; Restore R15 lwz r27,savevrsave(r31) ; Get the vrsave bf-- pfAltivecb,noavec2s ; Skip if no VMX... stvxl v0,r21,r29 ; Save a vector register lvxl v0,0,r28 ; Get the vector status mtvscr v0 ; Set the vector status lvxl v0,r21,r29 ; Restore work vector register noavec2s: mtspr vrsave,r27 ; Set the vrsave lwz r28,saveexception(r31) ; Get exception type stfd f0,emfp0(r29) ; Save FP0 lfd f0,savefpscrpad(r31) ; Get the fpscr mtfsf 0xFF,f0 ; Restore fpscr lfd f0,emfp0(r29) ; Restore the used register ld r16,saver16(r31) ; Restore R16 lwz r30,spcFlags(r29) ; Get the special flags from per_proc ld r17,saver17(r31) ; Restore R17 ld r18,saver18(r31) ; Restore R18 cmplwi cr1,r28,T_RESET ; Are we returning from a reset? ld r19,saver19(r31) ; Restore R19 ld r20,saver20(r31) ; Restore R20 li r27,0 ; Get a zero ld r21,saver21(r31) ; Restore R21 la r26,saver0(r26) ; Point to the first part of the next savearea andis. r30,r30,hi16(perfMonitor) ; Is the performance monitor enabled? ld r22,saver22(r31) ; Restore R22 ld r23,saver23(r31) ; Restore R23 bne++ cr1,er64rrst ; We are not returning from a reset... stw r27,lo16(EXT(ResetHandler)-EXT(ExceptionVectorsStart)+RESETHANDLER_TYPE)(br0) ; Allow resets again er64rrst: ld r24,saver24(r31) ; Restore R24 dcbz128 0,r26 ; Clear and allocate next savearea we use in the off chance it is still in when we next interrupt ld r25,saver25(r31) ; Restore R25 ld r26,saver26(r31) ; Restore R26 ld r27,saver27(r31) ; Restore R27 beq++ noPerfMonRestore64 ; Nope... lwz r28,savepmc+0(r31) lwz r29,savepmc+4(r31) mtspr pmc1_gp,r28 ; Restore PMC1 mtspr pmc2_gp,r29 ; Restore PMC2 lwz r28,savepmc+8(r31) lwz r29,savepmc+12(r31) mtspr pmc3_gp,r28 ; Restore PMC3 mtspr pmc4_gp,r29 ; Restore PMC4 lwz r28,savepmc+16(r31) lwz r29,savepmc+20(r31) mtspr pmc5_gp,r28 ; Restore PMC5 mtspr pmc6_gp,r29 ; Restore PMC6 lwz r28,savepmc+24(r31) lwz r29,savepmc+28(r31) mtspr pmc7_gp,r28 ; Restore PMC7 mtspr pmc8_gp,r29 ; Restore PMC8 ld r28,savemmcr1(r31) ld r29,savemmcr2(r31) mtspr mmcr1_gp,r28 ; Restore MMCR1 mtspr mmcra_gp,r29 ; Restore MMCRA ld r28,savemmcr0(r31) mtspr mmcr0_gp,r28 ; Restore MMCR0 noPerfMonRestore64: mfsprg r30,0 ; Get per_proc lwz r28,savecr(r31) ; Get CR to restore ld r29,savexer(r31) ; Get XER to restore mtcr r28 ; Restore the CR ld r28,savelr(r31) ; Get LR to restore mtxer r29 ; Restore the XER ld r29,savectr(r31) ; Get the CTR to restore mtlr r28 ; Restore the LR ld r28,saver30(r31) ; Get R30 mtctr r29 ; Restore the CTR ld r29,saver31(r31) ; Get R31 mtspr hsprg0,r28 ; Save R30 for later ld r28,saver28(r31) ; Restore R28 mtsprg 3,r29 ; Save R31 for later ld r29,saver29(r31) ; Restore R29 lwz r31,pfAvailable(r30) ; Get the feature flags ld r30,UAW(r30) ; Get the User Assist DoubleWord mtsprg 2,r31 ; Set the feature flags mfsprg r31,3 ; Restore R31 mtsprg 3,r30 ; Set the UAW mfspr r30,hsprg0 ; Restore R30 rfid ; Click heels three times and think very hard that there is no place like home... /* * exception_exit(savearea *) * * * ENTRY : IR and/or DR and/or interruptions can be on * R3 points to the virtual address of a savearea */ .align 5 .globl EXT(exception_exit) LEXT(exception_exit) mfsprg r29,2 ; Get feature flags mr r31,r3 ; Get the savearea in the right register mtcrf 0x04,r29 ; Set the features li r0,1 ; Get this just in case mtcrf 0x02,r29 ; Set the features lis r30,hi16(MASK(MSR_VEC)|MASK(MSR_FP)|MASK(MSR_ME)) ; Set up the MSR we will use throughout. Note that ME come on here if MCK rlwinm r4,r3,0,0,19 ; Round down to savearea block base lis r1,hi16(SAVredrive) ; Get redrive request mfsprg r2,0 ; Get the per_proc block ori r30,r30,lo16(MASK(MSR_VEC)|MASK(MSR_FP)|MASK(MSR_ME)) ; Rest of MSR bt++ pf64Bitb,eeSixtyFour ; We are 64-bit... lwz r4,SACvrswap+4(r4) ; Get the virtual to real translation bt pfNoMSRirb,eeNoMSR ; No MSR... mtmsr r30 ; Translation and all off isync ; Toss prefetch b eeNoMSRx .align 5 eeSixtyFour: ld r4,SACvrswap(r4) ; Get the virtual to real translation rldimi r30,r0,63,MSR_SF_BIT ; Set SF bit (bit 0) mtmsrd r30 ; Set 64-bit mode, turn off EE, DR, and IR isync ; Toss prefetch b eeNoMSRx .align 5 eeNoMSR: li r0,loadMSR ; Get the MSR setter SC mr r3,r30 ; Get new MSR sc ; Set it eeNoMSRx: xor r31,r31,r4 ; Convert the savearea to physical addressing lwz r4,SAVflags(r31) ; Pick up the flags mr r13,r31 ; Put savearea here also #if INSTRUMENT mfspr r5,pmc1 ; INSTRUMENT - saveinstr[8] - stamp exception exit stw r5,0x6100+(8*16)+0x0(0) ; INSTRUMENT - Save it mfspr r5,pmc2 ; INSTRUMENT - Get stamp stw r5,0x6100+(8*16)+0x4(0) ; INSTRUMENT - Save it mfspr r5,pmc3 ; INSTRUMENT - Get stamp stw r5,0x6100+(8*16)+0x8(0) ; INSTRUMENT - Save it mfspr r5,pmc4 ; INSTRUMENT - Get stamp stw r5,0x6100+(8*16)+0xC(0) ; INSTRUMENT - Save it #endif and. r0,r4,r1 ; Check if redrive requested dcbt br0,r2 ; We will need this in just a sec beq+ EatRupt ; No redrive, just exit... 0: mftbu r2 ; Avoid using an obsolete timestamp for the redrive mftb r4 mftbu r0 cmplw r0,r2 bne-- 0b stw r2,SAVtime(r13) stw r4,SAVtime+4(r13) lwz r11,saveexception(r13) ; Restore exception code b Redrive ; Redrive the exception... .align 12 ; Force page alignment .globl EXT(ExceptionVectorsEnd) EXT(ExceptionVectorsEnd): /* Used if relocating the exception vectors */ ; ; Here is where we keep the low memory globals ; . = 0x5000 .ascii "Hagfish " ; 5000 Unique eyecatcher .long 0 ; 5008 Zero .long 0 ; 500C Zero cont... .long EXT(PerProcTable) ; 5010 pointer to per_proc_entry table .long 0 ; 5014 Zero .globl EXT(mckFlags) EXT(mckFlags): .long 0 ; 5018 Machine check flags .long EXT(version) ; 501C Pointer to kernel version string .long 0 ; 5020 physical memory window virtual address .long 0 ; 5024 physical memory window virtual address .long 0 ; 5028 user memory window virtual address .long 0 ; 502C user memory window virtual address .long 0 ; 5030 VMM boot-args forced feature flags .globl EXT(maxDec) EXT(maxDec): .long 0x7FFFFFFF ; 5034 maximum decrementer value .globl EXT(pmsCtlp) EXT(pmsCtlp): .long 0 ; 5038 Pointer to power management stepper control .long 0 ; 503C reserved .long 0 ; 5040 reserved .long 0 ; 5044 reserved .long 0 ; 5048 reserved .long 0 ; 504C reserved .long 0 ; 5050 reserved .long 0 ; 5054 reserved .long 0 ; 5058 reserved .long 0 ; 505C reserved .long 0 ; 5060 reserved .long 0 ; 5064 reserved .long 0 ; 5068 reserved .long 0 ; 506C reserved .long 0 ; 5070 reserved .long 0 ; 5074 reserved .long 0 ; 5078 reserved .long 0 ; 507C reserved .globl EXT(trcWork) EXT(trcWork): .long 0 ; 5080 The next trace entry to use #if DEBUG .long 0xFFFFFFFF ; 5084 All enabled #else .long 0x00000000 ; 5084 All disabled on non-debug systems #endif .long 0 ; 5088 Start of the trace table .long 0 ; 508C End (wrap point) of the trace .long 0 ; 5090 Saved mask while in debugger .long 0 ; 5094 Size of trace table (1 - 256 pages) .long 0 ; 5098 traceGas[0] .long 0 ; 509C traceGas[1] .long 0 ; 50A0 reserved .long 0 ; 50A4 reserved .long 0 ; 50A8 reserved .long 0 ; 50AC reserved .long 0 ; 50B0 reserved .long 0 ; 50B4 reserved .long 0 ; 50B8 reserved .long 0 ; 50BC reserved .long 0 ; 50C0 reserved .long 0 ; 50C4 reserved .long 0 ; 50C8 reserved .long 0 ; 50CC reserved .long 0 ; 50D0 reserved .long 0 ; 50D4 reserved .long 0 ; 50D8 reserved .long 0 ; 50DC reserved .long 0 ; 50E0 reserved .long 0 ; 50E4 reserved .long 0 ; 50E8 reserved .long 0 ; 50EC reserved .long 0 ; 50F0 reserved .long 0 ; 50F4 reserved .long 0 ; 50F8 reserved .long 0 ; 50FC reserved .globl EXT(saveanchor) EXT(saveanchor): ; 5100 saveanchor .set .,.+SVsize .long 0 ; 5140 reserved .long 0 ; 5144 reserved .long 0 ; 5148 reserved .long 0 ; 514C reserved .long 0 ; 5150 reserved .long 0 ; 5154 reserved .long 0 ; 5158 reserved .long 0 ; 515C reserved .long 0 ; 5160 reserved .long 0 ; 5164 reserved .long 0 ; 5168 reserved .long 0 ; 516C reserved .long 0 ; 5170 reserved .long 0 ; 5174 reserved .long 0 ; 5178 reserved .long 0 ; 517C reserved .long 0 ; 5180 tlbieLock .long 0 ; 5184 reserved .long 0 ; 5188 reserved .long 0 ; 518C reserved .long 0 ; 5190 reserved .long 0 ; 5194 reserved .long 0 ; 5198 reserved .long 0 ; 519C reserved .long 0 ; 51A0 reserved .long 0 ; 51A4 reserved .long 0 ; 51A8 reserved .long 0 ; 51AC reserved .long 0 ; 51B0 reserved .long 0 ; 51B4 reserved .long 0 ; 51B8 reserved .long 0 ; 51BC reserved .long 0 ; 51C0 reserved .long 0 ; 51C4 reserved .long 0 ; 51C8 reserved .long 0 ; 51CC reserved .long 0 ; 51D0 reserved .long 0 ; 51D4 reserved .long 0 ; 51D8 reserved .long 0 ; 51DC reserved .long 0 ; 51E0 reserved .long 0 ; 51E4 reserved .long 0 ; 51E8 reserved .long 0 ; 51EC reserved .long 0 ; 51F0 reserved .long 0 ; 51F4 reserved .long 0 ; 51F8 reserved .long 0 ; 51FC reserved .globl EXT(dgWork) EXT(dgWork): .long 0 ; 5200 dgLock .long 0 ; 5204 dgFlags .long 0 ; 5208 dgMisc0 .long 0 ; 520C dgMisc1 .long 0 ; 5210 dgMisc2 .long 0 ; 5214 dgMisc3 .long 0 ; 5218 dgMisc4 .long 0 ; 521C dgMisc5 .globl EXT(LcksOpts) EXT(LcksOpts): .long 0 ; 5220 lcksWork .long 0 ; 5224 reserved .long 0 ; 5228 reserved .long 0 ; 522C reserved .long 0 ; 5230 reserved .long 0 ; 5234 reserved .long 0 ; 5238 reserved .long 0 ; 523C reserved .long 0 ; 5240 reserved .long 0 ; 5244 reserved .long 0 ; 5248 reserved .long 0 ; 524C reserved .long 0 ; 5250 reserved .long 0 ; 5254 reserved .long 0 ; 5258 reserved .long 0 ; 525C reserved .long 0 ; 5260 reserved .long 0 ; 5264 reserved .long 0 ; 5268 reserved .long 0 ; 526C reserved .long 0 ; 5270 reserved .long 0 ; 5274 reserved .long 0 ; 5278 reserved .long 0 ; 527C reserved .globl EXT(pPcfg) EXT(pPcfg): .long 0x80000000 | (12 << 8) | 12 ; 5280 pcfDefPcfg - 4k .long 0 ; 5284 pcfLargePcfg .long 0 ; 5288 Non-primary page configurations .long 0 ; 528C Non-primary page configurations .long 0 ; 5290 Non-primary page configurations .long 0 ; 5294 Non-primary page configurations .long 0 ; 5298 Non-primary page configurations .long 0 ; 529C Non-primary page configurations .long 0 ; 52A0 reserved .long 0 ; 52A4 reserved .long 0 ; 52A8 reserved .long 0 ; 52AC reserved .long 0 ; 52B0 reserved .long 0 ; 52B4 reserved .long 0 ; 52B8 reserved .long 0 ; 52BC reserved .long 0 ; 52C0 reserved .long 0 ; 52C4 reserved .long 0 ; 52C8 reserved .long 0 ; 52CC reserved .long 0 ; 52D0 reserved .long 0 ; 52D4 reserved .long 0 ; 52D8 reserved .long 0 ; 52DC reserved .long 0 ; 52E0 reserved .long 0 ; 52E4 reserved .long 0 ; 52E8 reserved .long 0 ; 52EC reserved .long 0 ; 52F0 reserved .long 0 ; 52F4 reserved .long 0 ; 52F8 reserved .long 0 ; 52FC reserved .globl EXT(killresv) EXT(killresv): .long 0 ; 5300 Used to kill reservations .long 0 ; 5304 Used to kill reservations .long 0 ; 5308 Used to kill reservations .long 0 ; 530C Used to kill reservations .long 0 ; 5310 Used to kill reservations .long 0 ; 5314 Used to kill reservations .long 0 ; 5318 Used to kill reservations .long 0 ; 531C Used to kill reservations .long 0 ; 5320 Used to kill reservations .long 0 ; 5324 Used to kill reservations .long 0 ; 5328 Used to kill reservations .long 0 ; 532C Used to kill reservations .long 0 ; 5330 Used to kill reservations .long 0 ; 5334 Used to kill reservations .long 0 ; 5338 Used to kill reservations .long 0 ; 533C Used to kill reservations .long 0 ; 5340 Used to kill reservations .long 0 ; 5344 Used to kill reservations .long 0 ; 5348 Used to kill reservations .long 0 ; 534C Used to kill reservations .long 0 ; 5350 Used to kill reservations .long 0 ; 5354 Used to kill reservations .long 0 ; 5358 Used to kill reservations .long 0 ; 535C Used to kill reservations .long 0 ; 5360 Used to kill reservations .long 0 ; 5364 Used to kill reservations .long 0 ; 5368 Used to kill reservations .long 0 ; 536C Used to kill reservations .long 0 ; 5370 Used to kill reservations .long 0 ; 5374 Used to kill reservations .long 0 ; 5378 Used to kill reservations .long 0 ; 537C Used to kill reservations .long 0 ; 5380 reserved .long 0 ; 5384 reserved .long 0 ; 5388 reserved .long 0 ; 538C reserved .long 0 ; 5390 reserved .long 0 ; 5394 reserved .long 0 ; 5398 reserved .long 0 ; 539C reserved .long 0 ; 53A0 reserved .long 0 ; 53A4 reserved .long 0 ; 53A8 reserved .long 0 ; 53AC reserved .long 0 ; 53B0 reserved .long 0 ; 53B4 reserved .long 0 ; 53B8 reserved .long 0 ; 53BC reserved .long 0 ; 53C0 reserved .long 0 ; 53C4 reserved .long 0 ; 53C8 reserved .long 0 ; 53CC reserved .long 0 ; 53D0 reserved .long 0 ; 53D4 reserved .long 0 ; 53D8 reserved .long 0 ; 53DC reserved .long 0 ; 53E0 reserved .long 0 ; 53E4 reserved .long 0 ; 53E8 reserved .long 0 ; 53EC reserved .long 0 ; 53F0 reserved .long 0 ; 53F4 reserved .long 0 ; 53F8 reserved .long 0 ; 53FC reserved .long 0 ; 5400 reserved .long 0 ; 5404 reserved .long 0 ; 5408 reserved .long 0 ; 540C reserved .long 0 ; 5410 reserved .long 0 ; 5414 reserved .long 0 ; 5418 reserved .long 0 ; 541C reserved .long 0 ; 5420 reserved .long 0 ; 5424 reserved .long 0 ; 5428 reserved .long 0 ; 542C reserved .long 0 ; 5430 reserved .long 0 ; 5434 reserved .long 0 ; 5438 reserved .long 0 ; 543C reserved .long 0 ; 5440 reserved .long 0 ; 5444 reserved .long 0 ; 5448 reserved .long 0 ; 544C reserved .long 0 ; 5450 reserved .long 0 ; 5454 reserved .long 0 ; 5458 reserved .long 0 ; 545C reserved .long 0 ; 5460 reserved .long 0 ; 5464 reserved .long 0 ; 5468 reserved .long 0 ; 546C reserved .long 0 ; 5470 reserved .long 0 ; 5474 reserved .long 0 ; 5478 reserved .long 0 ; 547C reserved ; ; The "shared page" is used for low-level debugging ; . = 0x6000 .globl EXT(sharedPage) EXT(sharedPage): ; Per processor data area .long 0xC24BC195 ; Comm Area validity value .long 0x87859393 ; Comm Area validity value .long 0xE681A2C8 ; Comm Area validity value .long 0x8599855A ; Comm Area validity value .long 0xD74BD296 ; Comm Area validity value .long 0x8388E681 ; Comm Area validity value .long 0xA2C88599 ; Comm Area validity value .short 0x855A ; Comm Area validity value .short 1 ; Comm Area version number .fill 1016*4,1,0 ; (filled with 0s) .data .align ALIGN .globl EXT(exception_end) EXT(exception_end): .long EXT(ExceptionVectorsEnd) -EXT(ExceptionVectorsStart) /* phys fn */