]> git.saurik.com Git - apple/security.git/blob - OSX/libsecurity_smime/lib/cmslocal.h
Security-57337.20.44.tar.gz
[apple/security.git] / OSX / libsecurity_smime / lib / cmslocal.h
1 /*
2 * The contents of this file are subject to the Mozilla Public
3 * License Version 1.1 (the "License"); you may not use this file
4 * except in compliance with the License. You may obtain a copy of
5 * the License at http://www.mozilla.org/MPL/
6 *
7 * Software distributed under the License is distributed on an "AS
8 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
9 * implied. See the License for the specific language governing
10 * rights and limitations under the License.
11 *
12 * The Original Code is the Netscape security libraries.
13 *
14 * The Initial Developer of the Original Code is Netscape
15 * Communications Corporation. Portions created by Netscape are
16 * Copyright (C) 1994-2000 Netscape Communications Corporation. All
17 * Rights Reserved.
18 *
19 * Contributor(s):
20 *
21 * Alternatively, the contents of this file may be used under the
22 * terms of the GNU General Public License Version 2 or later (the
23 * "GPL"), in which case the provisions of the GPL are applicable
24 * instead of those above. If you wish to allow use of your
25 * version of this file only under the terms of the GPL and not to
26 * allow others to use your version of this file under the MPL,
27 * indicate your decision by deleting the provisions above and
28 * replace them with the notice and other provisions required by
29 * the GPL. If you do not delete the provisions above, a recipient
30 * may use your version of this file under either the MPL or the
31 * GPL.
32 */
33
34 /*
35 * Support routines for CMS implementation, none of which are exported.
36 *
37 * Do not export this file! If something in here is really needed outside
38 * of smime code, first try to add a CMS interface which will do it for
39 * you. If that has a problem, then just move out what you need, changing
40 * its name as appropriate!
41 */
42
43 #ifndef _CMSLOCAL_H_
44 #define _CMSLOCAL_H_
45
46 #include "cmspriv.h"
47 #include "cmsreclist.h"
48 #include <Security/secasn1t.h>
49
50 extern const SecAsn1Template SecCmsIssuerAndSNTemplate[];
51 extern const SecAsn1Template SecCmsContentInfoTemplate[];
52
53 /************************************************************************/
54 SEC_BEGIN_PROTOS
55
56 /***********************************************************************
57 * cmscipher.c - en/decryption routines
58 ***********************************************************************/
59
60 /*
61 * SecCmsCipherContextStartDecrypt - create a cipher context to do decryption
62 * based on the given bulk * encryption key and algorithm identifier (which may include an iv).
63 */
64 extern SecCmsCipherContextRef
65 SecCmsCipherContextStartDecrypt(SecSymmetricKeyRef key, SECAlgorithmID *algid);
66
67 /*
68 * SecCmsCipherContextStartEncrypt - create a cipher object to do encryption,
69 * based on the given bulk encryption key and algorithm tag. Fill in the algorithm
70 * identifier (which may include an iv) appropriately.
71 */
72 extern SecCmsCipherContextRef
73 SecCmsCipherContextStartEncrypt(PRArenaPool *poolp, SecSymmetricKeyRef key, SECAlgorithmID *algid);
74
75 extern void
76 SecCmsCipherContextDestroy(SecCmsCipherContextRef cc);
77
78 /*
79 * SecCmsCipherContextDecryptLength - find the output length of the next call to decrypt.
80 *
81 * cc - the cipher context
82 * input_len - number of bytes used as input
83 * final - true if this is the final chunk of data
84 *
85 * Result can be used to perform memory allocations. Note that the amount
86 * is exactly accurate only when not doing a block cipher or when final
87 * is false, otherwise it is an upper bound on the amount because until
88 * we see the data we do not know how many padding bytes there are
89 * (always between 1 and bsize).
90 */
91 extern size_t
92 SecCmsCipherContextDecryptLength(SecCmsCipherContextRef cc, size_t input_len, Boolean final);
93
94 /*
95 * SecCmsCipherContextEncryptLength - find the output length of the next call to encrypt.
96 *
97 * cc - the cipher context
98 * input_len - number of bytes used as input
99 * final - true if this is the final chunk of data
100 *
101 * Result can be used to perform memory allocations.
102 */
103 extern size_t
104 SecCmsCipherContextEncryptLength(SecCmsCipherContextRef cc, size_t input_len, Boolean final);
105
106 /*
107 * SecCmsCipherContextDecrypt - do the decryption
108 *
109 * cc - the cipher context
110 * output - buffer for decrypted result bytes
111 * output_len_p - number of bytes in output
112 * max_output_len - upper bound on bytes to put into output
113 * input - pointer to input bytes
114 * input_len - number of input bytes
115 * final - true if this is the final chunk of data
116 *
117 * Decrypts a given length of input buffer (starting at "input" and
118 * containing "input_len" bytes), placing the decrypted bytes in
119 * "output" and storing the output length in "*output_len_p".
120 * "cc" is the return value from SecCmsCipherStartDecrypt.
121 * When "final" is true, this is the last of the data to be decrypted.
122 */
123 extern OSStatus
124 SecCmsCipherContextDecrypt(SecCmsCipherContextRef cc, unsigned char *output,
125 size_t *output_len_p, size_t max_output_len,
126 const unsigned char *input, size_t input_len,
127 Boolean final);
128
129 /*
130 * SecCmsCipherContextEncrypt - do the encryption
131 *
132 * cc - the cipher context
133 * output - buffer for decrypted result bytes
134 * output_len_p - number of bytes in output
135 * max_output_len - upper bound on bytes to put into output
136 * input - pointer to input bytes
137 * input_len - number of input bytes
138 * final - true if this is the final chunk of data
139 *
140 * Encrypts a given length of input buffer (starting at "input" and
141 * containing "input_len" bytes), placing the encrypted bytes in
142 * "output" and storing the output length in "*output_len_p".
143 * "cc" is the return value from SecCmsCipherStartEncrypt.
144 * When "final" is true, this is the last of the data to be encrypted.
145 */
146 extern OSStatus
147 SecCmsCipherContextEncrypt(SecCmsCipherContextRef cc, unsigned char *output,
148 size_t *output_len_p, size_t max_output_len,
149 const unsigned char *input, size_t input_len,
150 Boolean final);
151
152 /************************************************************************
153 * cmspubkey.c - public key operations
154 ************************************************************************/
155
156 /*
157 * SecCmsUtilEncryptSymKeyRSA - wrap a symmetric key with RSA
158 *
159 * this function takes a symmetric key and encrypts it using an RSA public key
160 * according to PKCS#1 and RFC2633 (S/MIME)
161 */
162 extern OSStatus
163 SecCmsUtilEncryptSymKeyRSA(PLArenaPool *poolp, SecCertificateRef cert,
164 SecSymmetricKeyRef key,
165 CSSM_DATA_PTR encKey);
166
167 extern OSStatus
168 SecCmsUtilEncryptSymKeyRSAPubKey(PLArenaPool *poolp,
169 SecPublicKeyRef publickey,
170 SecSymmetricKeyRef bulkkey, CSSM_DATA_PTR encKey);
171
172 /*
173 * SecCmsUtilDecryptSymKeyRSA - unwrap a RSA-wrapped symmetric key
174 *
175 * this function takes an RSA-wrapped symmetric key and unwraps it, returning a symmetric
176 * key handle. Please note that the actual unwrapped key data may not be allowed to leave
177 * a hardware token...
178 */
179 extern SecSymmetricKeyRef
180 SecCmsUtilDecryptSymKeyRSA(SecPrivateKeyRef privkey, CSSM_DATA_PTR encKey, SECOidTag bulkalgtag);
181
182 extern OSStatus
183 SecCmsUtilEncryptSymKeyECDH(PLArenaPool *poolp, SecCertificateRef cert, SecSymmetricKeyRef key,
184 CSSM_DATA_PTR encKey, CSSM_DATA_PTR ukm, SECAlgorithmID *keyEncAlg,
185 CSSM_DATA_PTR originatorPubKey);
186
187 extern SecSymmetricKeyRef
188 SecCmsUtilDecryptSymKeyECDH(SecPrivateKeyRef privkey, CSSM_DATA_PTR encKey, CSSM_DATA_PTR ukm,
189 SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, CSSM_DATA_PTR pubKey);
190
191 #if 0
192 extern OSStatus
193 SecCmsUtilEncryptSymKeyMISSI(PLArenaPool *poolp, SecCertificateRef cert, SecSymmetricKeyRef key,
194 SECOidTag symalgtag, CSSM_DATA_PTR encKey, CSSM_DATA_PTR *pparams, void *pwfn_arg);
195
196 extern SecSymmetricKeyRef
197 SecCmsUtilDecryptSymKeyMISSI(SecPrivateKeyRef privkey, CSSM_DATA_PTR encKey,
198 SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, void *pwfn_arg);
199
200 extern OSStatus
201 SecCmsUtilEncryptSymKeyESDH(PLArenaPool *poolp, SecCertificateRef cert, SecSymmetricKeyRef key,
202 CSSM_DATA_PTR encKey, CSSM_DATA_PTR ukm, SECAlgorithmID *keyEncAlg,
203 CSSM_DATA_PTR originatorPubKey);
204
205 extern SecSymmetricKeyRef
206 SecCmsUtilDecryptSymKeyESDH(SecPrivateKeyRef privkey, CSSM_DATA_PTR encKey,
207 SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, void *pwfn_arg);
208 #endif
209
210 /************************************************************************
211 * cmsreclist.c - recipient list stuff
212 ************************************************************************/
213 extern SecCmsRecipient **nss_cms_recipient_list_create(SecCmsRecipientInfoRef *recipientinfos);
214 extern void nss_cms_recipient_list_destroy(SecCmsRecipient **recipient_list);
215 extern SecCmsRecipientEncryptedKey *SecCmsRecipientEncryptedKeyCreate(PLArenaPool *poolp);
216
217 /************************************************************************
218 * cmsarray.c - misc array functions
219 ************************************************************************/
220 /*
221 * SecCmsArrayAlloc - allocate an array in an arena
222 */
223 extern void **
224 SecCmsArrayAlloc(PRArenaPool *poolp, int n);
225
226 /*
227 * SecCmsArrayAdd - add an element to the end of an array
228 */
229 extern OSStatus
230 SecCmsArrayAdd(PRArenaPool *poolp, void ***array, void *obj);
231
232 /*
233 * SecCmsArrayIsEmpty - check if array is empty
234 */
235 extern Boolean
236 SecCmsArrayIsEmpty(void **array);
237
238 /*
239 * SecCmsArrayCount - count number of elements in array
240 */
241 extern int
242 SecCmsArrayCount(void **array);
243
244 /*
245 * SecCmsArraySort - sort an array ascending, in place
246 *
247 * If "secondary" is not NULL, the same reordering gets applied to it.
248 * If "tertiary" is not NULL, the same reordering gets applied to it.
249 * "compare" is a function that returns
250 * < 0 when the first element is less than the second
251 * = 0 when the first element is equal to the second
252 * > 0 when the first element is greater than the second
253 */
254 extern void
255 SecCmsArraySort(void **primary, int (*compare)(void *,void *), void **secondary, void **tertiary);
256
257 /************************************************************************
258 * cmsattr.c - misc attribute functions
259 ************************************************************************/
260 /*
261 * SecCmsAttributeCreate - create an attribute
262 *
263 * if value is NULL, the attribute won't have a value. It can be added later
264 * with SecCmsAttributeAddValue.
265 */
266 extern SecCmsAttribute *
267 SecCmsAttributeCreate(PRArenaPool *poolp, SECOidTag oidtag, CSSM_DATA_PTR value, Boolean encoded);
268
269 /*
270 * SecCmsAttributeAddValue - add another value to an attribute
271 */
272 extern OSStatus
273 SecCmsAttributeAddValue(PLArenaPool *poolp, SecCmsAttribute *attr, CSSM_DATA_PTR value);
274
275 /*
276 * SecCmsAttributeGetType - return the OID tag
277 */
278 extern SECOidTag
279 SecCmsAttributeGetType(SecCmsAttribute *attr);
280
281 /*
282 * SecCmsAttributeGetValue - return the first attribute value
283 *
284 * We do some sanity checking first:
285 * - Multiple values are *not* expected.
286 * - Empty values are *not* expected.
287 */
288 extern CSSM_DATA_PTR
289 SecCmsAttributeGetValue(SecCmsAttribute *attr);
290
291 /*
292 * SecCmsAttributeCompareValue - compare the attribute's first value against data
293 */
294 extern Boolean
295 SecCmsAttributeCompareValue(SecCmsAttribute *attr, CSSM_DATA_PTR av);
296
297 /*
298 * SecCmsAttributeArrayEncode - encode an Attribute array as SET OF Attributes
299 *
300 * If you are wondering why this routine does not reorder the attributes
301 * first, and might be tempted to make it do so, see the comment by the
302 * call to ReorderAttributes in cmsencode.c. (Or, see who else calls this
303 * and think long and hard about the implications of making it always
304 * do the reordering.)
305 */
306 extern CSSM_DATA_PTR
307 SecCmsAttributeArrayEncode(PRArenaPool *poolp, SecCmsAttribute ***attrs, CSSM_DATA_PTR dest);
308
309 /*
310 * SecCmsAttributeArrayReorder - sort attribute array by attribute's DER encoding
311 *
312 * make sure that the order of the attributes guarantees valid DER (which must be
313 * in lexigraphically ascending order for a SET OF); if reordering is necessary it
314 * will be done in place (in attrs).
315 */
316 extern OSStatus
317 SecCmsAttributeArrayReorder(SecCmsAttribute **attrs);
318
319 /*
320 * SecCmsAttributeArrayFindAttrByOidTag - look through a set of attributes and
321 * find one that matches the specified object ID.
322 *
323 * If "only" is true, then make sure that there is not more than one attribute
324 * of the same type. Otherwise, just return the first one found. (XXX Does
325 * anybody really want that first-found behavior? It was like that when I found it...)
326 */
327 extern SecCmsAttribute *
328 SecCmsAttributeArrayFindAttrByOidTag(SecCmsAttribute **attrs, SECOidTag oidtag, Boolean only);
329
330 /*
331 * SecCmsAttributeArrayAddAttr - add an attribute to an
332 * array of attributes.
333 */
334 extern OSStatus
335 SecCmsAttributeArrayAddAttr(PLArenaPool *poolp, SecCmsAttribute ***attrs, SecCmsAttribute *attr);
336
337 /*
338 * SecCmsAttributeArraySetAttr - set an attribute's value in a set of attributes
339 */
340 extern OSStatus
341 SecCmsAttributeArraySetAttr(PLArenaPool *poolp, SecCmsAttribute ***attrs, SECOidTag type, CSSM_DATA_PTR value, Boolean encoded);
342
343 /************************************************************************/
344 SEC_END_PROTOS
345
346 #endif /* _CMSLOCAL_H_ */