network_cmds-543.50.4.tar.gz

[apple/network_cmds.git] / ifconfig.tproj / ifconfig.8

diff --git a/ifconfig.tproj/ifconfig.8 b/ifconfig.tproj/ifconfig.8
index 91a2926b1431e35bd478022345d0af3340a280b6..9b06f04fe70d5337d0f2c088e8b9ff3484f64209 100644 (file)
--- a/ifconfig.tproj/ifconfig.8
+++ b/ifconfig.tproj/ifconfig.8
@@ -558,6 +558,16 @@ Do not disable all IPv6 communication on the interface.
 Disable the processing of Secure Neighbor Discovery (SEND).
 .It Cm -insecure
 Do not disabled the processing of Secure Neighbor Discovery (SEND).
+.It Cm dad
+Perform duplicate address detection (DAD).
+.It Cm -dad
+Do not perform duplicate address detection (DAD).
+.It Cm replicated
+Modify duplicate address detection (DAD) protocol to expect that interface
+configuration is replicated at a network sleep proxy. Ignores certain NA
+messages and disables optimistic DAD.
+.It Cm -replicated
+Do not use modified duplicated address detection (DAD) protocol.
 .El
 .Pp
 The following parameters are specific to link aggregate interfaces:
@@ -864,6 +874,13 @@ Set the maximum number of hosts allowed from an interface, packets with unknown
 source addresses are dropped until an existing host cache entry expires or is
 removed.
 Set to 0 to disable.
+.It Cm hostfilter Ar interface Ar address
+Configure the bridge to accept incoming packet on the interface
+only if they match the given MAC address and IP address
+-- use the command twice to set both type of addresses.
+Other filtering restrictions apply.
+.It Cm -hostfilter Ar interface
+Allow traffic from any host on that interface.
 .El
 .Pp
 The following parameters are specific to vlan interfaces: