# $KAME: racoon.conf.in,v 1.17 2001/08/14 12:10:22 sakane Exp $

# "path" must be placed before it should be used.
# You can overwrite which you defined, but it should not use due to confusing.
path include "/etc/racoon" ;
#include "remote.conf" ;

# search this file for pre_shared_key with various ID key.
path pre_shared_key "/etc/racoon/psk.txt" ;

# racoon will look for certificate file in the directory,
# if the certificate/certificate request payload is received.
path certificate "/etc/cert" ;

# "log" specifies logging level.  It is followed by either "notify", "debug"
# or "debug2".
#log debug;

# "padding" defines some parameter of padding.  You should not touch these.
padding
{
	maximum_length 20;	# maximum padding length.
	randomize off;		# enable randomize length.
	strict_check off;	# enable strict check.
	exclusive_tail off;	# extract last one octet.
}

# if no listen directive is specified, racoon will listen to all
# available interface addresses.
listen
{
	#isakmp ::1 [7000];
	#isakmp 202.249.11.124 [500];
	#admin [7002];		# administrative's port by kmpstat.
	#strict_address; 	# required all addresses must be bound.
}

# Specification of default various timer.
timer
{
	# These value can be changed per remote node.
	counter 5;		# maximum trying count to send.
	interval 20 sec;	# maximum interval to resend.
	persend 1;		# the number of packets per a send.

	# timer for waiting to complete each phase.
	phase1 30 sec;
	phase2 15 sec;
}

remote anonymous
{
	#exchange_mode main,aggressive;
	exchange_mode aggressive,main;
	doi ipsec_doi;
	situation identity_only;

	#my_identifier address;
	my_identifier user_fqdn "macuser@localhost";
	peers_identifier user_fqdn "macuser@localhost";
	#certificate_type x509 "mycert" "mypriv";

	nonce_size 16;
	lifetime time 1 min;	# sec,min,hour
	initial_contact on;
	support_mip6 on;
	proposal_check obey;	# obey, strict or claim

	proposal {
		encryption_algorithm 3des;
		hash_algorithm sha1;
		authentication_method pre_shared_key ;
		dh_group 2 ;
	}
}

remote ::1 [8000]
{
	#exchange_mode main,aggressive;
	exchange_mode aggressive,main;
	doi ipsec_doi;
	situation identity_only;

	my_identifier user_fqdn "macuser@localhost";
	peers_identifier user_fqdn "macuser@localhost";
	#certificate_type x509 "mycert" "mypriv";

	nonce_size 16;
	lifetime time 1 min;	# sec,min,hour

	proposal {
		encryption_algorithm 3des;
		hash_algorithm sha1;
		authentication_method pre_shared_key ;
		dh_group 2 ;
	}
}

sainfo anonymous
{
	pfs_group 1;
	lifetime time 30 sec;
	encryption_algorithm 3des ;
	authentication_algorithm hmac_sha1;
	compression_algorithm deflate ;
}

# sainfo address 203.178.141.209 any address 203.178.141.218 any
# {
#	pfs_group 1;
#	lifetime time 30 sec;
#	encryption_algorithm des ;
#	authentication_algorithm hmac_md5;
#	compression_algorithm deflate ;
# }

sainfo address ::1 icmp6 address ::1 icmp6
{
	pfs_group 1;
	lifetime time 60 sec;
	encryption_algorithm 3des, cast128, blowfish 448, des ;
	authentication_algorithm hmac_sha1, hmac_md5 ;
	compression_algorithm deflate ;
}