X-Git-Url: https://git.saurik.com/apple/icu.git/blobdiff_plain/635ab21dab8439adcb4398246a23211b9a46cc1a..5ea0322b6ab2af986e4c764284141380031dd014:/makefile?ds=sidebyside

diff --git a/makefile b/makefile
index d85cd0fc..ca5b4fa4 100644
--- a/makefile
+++ b/makefile
@@ -1,10 +1,90 @@
 ##
-# Makefile for ICU
+# Wrapper makefile for ICU
+# Copyright (C) 2003-2016 Apple Inc. All rights reserved.
 #
 # See http://www.gnu.org/manual/make/html_chapter/make_toc.html#SEC_Contents
 # for documentation on makefiles. Most of this was culled from the ncurses makefile.
 #
-##
+#################################
+# Apple ICU repository tag and submission numbers
+#
+# The repository tag number consists of a main version and an optional branch version, as
+# follows:
+# ICU-MMmAA[.B]
+#
+# MM comes from the open-source ICU major version, and can range from 1 to 214 (the max is
+#    due to B&I limits on submission versions. As of March 2016 this is 57; it increases
+#    by 1 for each ICU major release (usually 2 / year). This corresponds to
+#    U_ICU_VERSION_MAJOR_NUM.
+# m  is a single digit specifying the open-source ICU minor version. This is 0 before final
+#    release (e.g. for pre-release milestones), becomes 1 for release candidate and final
+#    release, and may increase to 2 or a little more for occasional dot releases with
+#    maintenance fixes. This corresponds to U_ICU_VERSION_MINOR_NUM.
+#
+#    Note that the ICU release may also utilize U_ICU_VERSION_PATCHLEVEL_NUM; however
+#    that is ignored for the Apple ICU tag and submission numbers, and any related code
+#    or data changes will bne distinguished by updating the Apple delta version AA below.
+#
+# AA is a 2-digit value specifying the version of the additional Apple deltas after
+#    integrating a major release. This is always 2 digits (zero padded) and ranges from
+#    00 (the first release after integrating a new ICU version) to 99.
+# B  is an optional branch version, i.e. a branch from the mainline version specified by
+#    the MMmAA part. It can range from 1 to 99 and is NOT zero-padded.
+#
+#    For Windows builds, the first 3 values of the 4-part FILEVERSION and PRODUCTVERSION
+#    are formed from U_ICU_VERSION_MAJOR_NUM, U_ICU_VERSION_MINOR_NUM, and
+#    U_ICU_VERSION_PATCHLEVEL_NUM; the 4th value is ICU_BUILD, formed from AA and B as
+#    ICU_BUILD = 100*AA + B.
+#
+# The B&I submission version always has 3 parts separated by '.':
+# MMmAA.(0 | B).T
+#
+# The first part MMmAA is the same as the repository tag number.
+# If the repository tag has no branch version, the second part is 0, otherwise it is
+# the same as the branch version (1..99).
+# The third part is a single digit designating the submission train; since the installsrc
+# target now submits different sources to different trains, we have to distinguish them.
+# The values currently defined for T are
+# 1  OSX trains
+# 2  embedded trains (iOS, tvos, watchos) including simulator versions thereof
+# 8  AAS for Windows
+# 9  linux for Siri servers
+# (additional train numbers for Apple platforms can be assigned from 3 up, additional
+# train numbers for non-Apple platforms can be assigned from 7 down).
+#
+#################################
+# Notes on building for AAS using Windows (7) + Visual Studio (2010) + Cygwin:
+#
+# Either this should be run indirectly from the VS command prompt via the
+# BuildICUForAAS script or project, using the instructions there (which build
+# both 32-bit and 64-bit), or it should be run from within Cygwin using the
+# following instructions or equivalent (different steps for 32-bit or 64-bit):
+#
+# 1. From VS command prompt, run vcvarsall.bat to set various environment variables.
+#    For a 32-bit build:
+#    > "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.bat" x86
+#    For a 64-bit build:
+#    > "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\vcvarsall.bat" amd64
+#
+# 2. Launch Cygwin, e.g.
+#    > C:\cygwin\Cygwin.bat
+#
+# 3. Within cygwin, cd to the top level of the ICU sources directory, e.g.
+#    $ cd ICU
+#
+# 4. Adjust the PATH to put the appropriate VC tools directory first:
+#    For a 32-bit build:
+#    $ export PATH="/cygdrive/c/Program Files (x86)/Microsoft Visual Studio 10.0/VC/bin/":$PATH
+#    For a 64-bit build:
+#    $ export PATH="/cygdrive/c/Program Files (x86)/Microsoft Visual Studio 10.0/VC/bin/amd64/":$PATH
+#
+# 5. Run the ICU makefile
+#    For a 32-bit build:
+#    make [install] WINDOWS=YES [ARCH64=NO] [DSTROOT=...]
+#    For a 64-bit build:
+#    make [install] WINDOWS=YES ARCH64=YES [DSTROOT=...]
+#
+#################################
 
 #################################
 #################################
@@ -17,55 +97,504 @@
 # when used. This is in contrast to using '=' which denotes a
 # recursively expanded variable.
 
-SHELL := /bin/sh
-
-# Sane defaults, which are typically overridden on the command line.
-SRCROOT=$(shell pwd)
-OBJROOT=$(SRCROOT)/build
-DSTROOT=$(OBJROOT)
-SYMROOT=$(OBJROOT)
-APPLE_INTERNAL_DIR=/AppleInternal
+# Sane defaults, which are typically overridden on the command line
+#or by the environment
+WINDOWS=NO
+LINUX=NO
+ARCH64=NO
 RC_ARCHS=
+ifndef RC_ProjectSourceVersion
+ifdef RC_PROJECTSOURCEVERSION
+	RC_ProjectSourceVersion=$(RC_PROJECTSOURCEVERSION)
+endif
+endif
+$(info # RC_ARCHS=$(RC_ARCHS))
+$(info # RC_ProjectName=$(RC_ProjectName))
+$(info # RC_ProjectSourceVersion=$(RC_ProjectSourceVersion))
+
+# Disallow $(WINDOWS) and $(LINUX) both YES
+ifeq "$(WINDOWS)" "YES"
+	ifeq "$(LINUX)" "YES"
+		$(error WINDOWS and LINUX cannot both be YES)
+	endif
+endif
+
+# chicken and egg problem: we can't use cygpath until PATH & SHELL are set,
+# but we have to convert VS100VCTOOLS_PATH in order to set PATH. So instead we
+# convert using subst.
+ifeq "$(WINDOWS)" "YES"
+	ifneq "$(VS100VCTOOLS_PATH)" ""
+		VS100VCTOOLS_CYGPATH:= /cygdrive/$(subst :/,/,$(subst \,/,$(VS100VCTOOLS_PATH)))
+		PATH:=$(VS100VCTOOLS_CYGPATH):/usr/local/bin/:/usr/bin/:$(PATH)
+	endif
+endif
+$(info # PATH=$(PATH))
+
+# For some reason, cygwin bash (at least when run non-login) needs to use
+# bash for pwd, echo etc. (but uname does not work, see below)
+ifeq "$(WINDOWS)" "YES"
+	SHELL := /bin/bash
+else
+	SHELL := /bin/sh
+endif
+
+# if building for windows from batch script, convert Win-style paths
+# for SRCROOT etc. to cygwin-style paths. Don't define them if not
+# already defined.
+ifeq "$(WINDOWS)" "YES"
+	ifneq "$(VS100VCTOOLS_PATH)" ""
+		ifdef SRCROOT
+			SRCROOT:=$(shell /bin/cygpath -ua $(subst \,/,$(SRCROOT)))
+		endif
+		ifdef OBJROOT
+			OBJROOT:=$(shell /bin/cygpath -ua $(subst \,/,$(OBJROOT)))
+		endif
+		ifdef DSTROOT
+			DSTROOT:=$(shell /bin/cygpath -ua $(subst \,/,$(DSTROOT)))
+		endif
+		ifdef SYMROOT
+			SYMROOT:=$(shell /bin/cygpath -ua $(subst \,/,$(SYMROOT)))
+		endif
+	endif
+endif
+
+ifndef SRCROOT
+	SRCROOT:=$(shell pwd)
+endif
+ifndef OBJROOT
+	OBJROOT:=$(SRCROOT)/build
+endif
+ifndef DSTROOT
+	DSTROOT:=$(OBJROOT)
+endif
+ifndef SYMROOT
+	SYMROOT:=$(OBJROOT)
+endif
+$(info # SRCROOT=$(SRCROOT))
+$(info # OBJROOT=$(OBJROOT))
+$(info # DSTROOT=$(DSTROOT))
 
 # Disallow $(SRCROOT) == $(OBJROOT)
 ifeq ($(OBJROOT), $(SRCROOT))
 $(error SRCROOT same as OBJROOT)
 endif
 
+ifeq "$(WINDOWS)" "YES"
+	ifeq "$(ARCH64)" "YES"
+		OBJROOT_CURRENT=$(OBJROOT)/obj64
+		SYMROOT_CURRENT=$(SYMROOT)/obj64
+	else
+		OBJROOT_CURRENT=$(OBJROOT)/obj32
+		SYMROOT_CURRENT=$(SYMROOT)/obj32
+	endif
+else ifeq "$(LINUX)" "YES"
+	ifeq "$(ARCH64)" "YES"
+		OBJROOT_CURRENT=$(OBJROOT)/obj64
+		SYMROOT_CURRENT=$(SYMROOT)/obj64
+	else
+		OBJROOT_CURRENT=$(OBJROOT)/obj32
+		SYMROOT_CURRENT=$(SYMROOT)/obj32
+	endif
+else
+	OBJROOT_CURRENT=$(OBJROOT)
+	SYMROOT_CURRENT=$(SYMROOT)
+endif
+
+ifndef SDKROOT
+	SDKPATH:=/
+else ifeq "$(SDKROOT)" ""
+	SDKPATH:=/
+else
+	SDKPATH:=$(shell xcodebuild -version -sdk $(SDKROOT) Path)
+	ifeq "$(SDKPATH)" ""
+		SDKPATH:=/
+	endif
+endif
+$(info # SDKROOT=$(SDKROOT))
+$(info # SDKPATH=$(SDKPATH))
+
+# An Apple submission version (passed in RC_ProjectSourceVersion for official builds) is
+# X[.Y[.Z]]
+# where X is in range 0-214747, Y and Z are in range 0-99 (with no leading zeros).
+# This corresponds to MMmAA.(0 | B).T where
+# MM is U_ICU_VERSION_MAJOR_NUM
+# m  is U_ICU_VERSION_MINOR_NUM
+# AA is the Apple delta version 
+# B  is the Apple branch version (1 or 2 digits)
+# T  is the Apple train code for submissions.
+# Note The value for the SourceVersion property in version.plists will be calculated as
+# (X*10000 + Y*100 + Z).
+# We want ICU_BUILD = 100*AA + B.
+# 
+ifneq "$(RC_ProjectSourceVersion)" ""
+	ifeq "$(WINDOWS)" "YES"
+		ICU_BUILD_AA  := $(shell echo $(RC_ProjectSourceVersion) | sed -r -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\2/')
+		ICU_BUILD_B1 := $(shell echo $(RC_ProjectSourceVersion) | sed -r -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\4/')
+		ICU_BUILD_B2 := $(shell echo $(RC_ProjectSourceVersion) | sed -r -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\5/')
+		ICU_TRAIN_CODE := $(shell echo $(RC_ProjectSourceVersion) | sed -r -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\7/')
+	else
+		ICU_BUILD_AA  := $(shell echo $(RC_ProjectSourceVersion) | sed -E -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\2/')
+		ICU_BUILD_B1 := $(shell echo $(RC_ProjectSourceVersion) | sed -E -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\4/')
+		ICU_BUILD_B2 := $(shell echo $(RC_ProjectSourceVersion) | sed -E -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\5/')
+		ICU_TRAIN_CODE := $(shell echo $(RC_ProjectSourceVersion) | sed -E -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\7/')
+	endif
+	ifeq "$(ICU_BUILD_AA)" ""
+		ICU_BUILD := 0
+	else
+		ICU_BUILD := $(subst a,$(ICU_BUILD_AA),abc)
+		ifeq "$(ICU_BUILD_B1)" ""
+			ICU_BUILD := $(subst b,0,$(ICU_BUILD))
+			ICU_BUILD := $(subst c,0,$(ICU_BUILD))
+		else
+			ifeq "$(ICU_BUILD_B2)" ""
+				ICU_BUILD := $(subst b,0,$(ICU_BUILD))
+				ICU_BUILD := $(subst c,$(ICU_BUILD_B1),$(ICU_BUILD))
+			else
+				ICU_BUILD := $(subst b,$(ICU_BUILD_B1),$(ICU_BUILD))
+				ICU_BUILD := $(subst c,$(ICU_BUILD_B2),$(ICU_BUILD))
+			endif
+		endif
+	endif
+	ifeq "$(ICU_TRAIN_CODE)" ""
+		ICU_TRAIN_CODE := 0
+	endif
+else
+	ICU_BUILD := 0
+	ICU_TRAIN_CODE := 0
+endif
+$(info # ICU_BUILD=$(ICU_BUILD))
+$(info # ICU_TRAIN_CODE=$(ICU_TRAIN_CODE))
+ifeq "$(ICU_BUILD)" "0"
+	DEFINE_BUILD_LEVEL =
+else
+	DEFINE_BUILD_LEVEL =-DU_ICU_VERSION_BUILDLEVEL_NUM=$(ICU_BUILD)
+endif
+
+# Determine build type. In some cases (e.g. running installsrc for submitproject)
+# the only accurate information we may have about build type is from ICU_TRAIN_CODE,
+# so give priority to that if nonzero.
+# The values currently defined for ICU_TRAIN_CODE and corresponding ICU_BUILD_TYPE are
+# 1  OSX trains
+# 2  embedded trains (iOS, tvos, watchos) including simulator versions thereof.
+#    may have BUILD_TYPE=DEVICE,SIMULATOR,TOOL
+# 8  AAS for Windows
+# 9  linux for Siri servers
+#
+ifeq "$(WINDOWS)" "YES"
+	ICU_FOR_APPLE_PLATFORMS:=NO
+else ifeq "$(ICU_TRAIN_CODE)" "8"
+	override WINDOWS=YES
+	ICU_FOR_APPLE_PLATFORMS:=NO
+else ifeq "$(LINUX)" "YES"
+	ICU_FOR_APPLE_PLATFORMS:=NO
+else ifeq "$(ICU_TRAIN_CODE)" "9"
+	override LINUX=YES
+	ICU_FOR_APPLE_PLATFORMS:=NO
+else
+	ICU_FOR_APPLE_PLATFORMS:=YES
+endif
+
+# For Apple builds, get more details from the SDK if available
+# In TargetConditionals.h:
+# TARGET_OS_IPHONE -is 1 iff generating code for firmware, devices, or simulator (all embedded trains)
+# in that case:
+# 	exactly one of the following is 1: TARGET_OS_SIMULATOR, TARGET_OS_EMBEDDED (i.e. device)
+# 	exactly one of the following is 1: TARGET_OS_IOS, TARGET_OS_TV, TARGET_OS_WATCH
+#
+ifeq "$(ICU_FOR_APPLE_PLATFORMS)" "YES"
+	HOSTCC := $(shell xcrun --sdk macosx --find cc)
+	HOSTCXX := $(shell xcrun --sdk macosx --find c++)
+	HOSTSDKPATH := $(shell xcrun --sdk macosx --show-sdk-path)
+	HOSTISYSROOT = -isysroot $(HOSTSDKPATH)
+	ifeq "$(SDKPATH)" "/"
+		ISYSROOT:= -isysroot $(HOSTSDKPATH)
+		CC := $(HOSTCC)
+		CXX := $(HOSTCXX)
+		NM := $(shell xcrun --sdk macosx --find nm)
+		STRIPCMD := $(shell xcrun --sdk macosx --find strip)
+		ifeq "$(ICU_TRAIN_CODE)" "2"
+		    export ICU_FOR_EMBEDDED_TRAINS:=YES
+		else
+		    export ICU_FOR_EMBEDDED_TRAINS:=NO
+		endif
+	else
+		ISYSROOT:= -isysroot $(SDKPATH)
+		CC := $(shell xcrun --sdk $(SDKPATH) --find cc)
+		CXX := $(shell xcrun --sdk $(SDKPATH) --find c++)
+		NM := $(shell xcrun --sdk $(SDKPATH) --find nm)
+		STRIPCMD := $(shell xcrun --sdk $(SDKPATH) --find strip)
+		EMBEDDEDTRAIN:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_IPHONE | cut -d' ' -f3)
+		ifeq "$(EMBEDDEDTRAIN)" "1"
+			export ICU_FOR_EMBEDDED_TRAINS:=YES
+		else
+		    export ICU_FOR_EMBEDDED_TRAINS:=NO
+		endif
+	endif
+	SIMULATOROS:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_SIMULATOR | cut -d' ' -f3)
+	TVOS:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_TV | cut -d' ' -f3)
+	WATCHOS:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_WATCH | cut -d' ' -f3)
+	ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES"
+		ifeq "$(SIMULATOROS)" "1"
+			BUILD_TYPE=SIMULATOR
+		else
+			BUILD_TYPE=DEVICE
+		endif
+	else ifeq "$(RC_ProjectName)" "tzTools"
+		BUILD_TYPE=TOOL
+	else
+		BUILD_TYPE=
+	endif
+else
+	ifeq "$(LINUX)" "YES"
+		ISYSROOT:=
+		CC := gcc
+		CXX := g++
+	endif
+	export ICU_FOR_EMBEDDED_TRAINS:=NO
+	TVOS:=0
+	WATCHOS:=0
+	BUILD_TYPE=
+endif
+
+CROSS_BUILD:=$(ICU_FOR_EMBEDDED_TRAINS)
+CROSSHOST_OBJROOT=$(OBJROOT)/crossbuildhost
+
+$(info # ICU_FOR_APPLE_PLATFORMS=$(ICU_FOR_APPLE_PLATFORMS))
+$(info # HOSTCC=$(HOSTCC))
+$(info # HOSTCXX=$(HOSTCXX))
+$(info # HOSTISYSROOT=$(HOSTISYSROOT))
+$(info # CC=$(CC))
+$(info # CXX=$(CXX))
+$(info # ISYSROOT=$(ISYSROOT))
+$(info # ICU_FOR_EMBEDDED_TRAINS=$(ICU_FOR_EMBEDDED_TRAINS))
+$(info # CROSS_BUILD=$(CROSS_BUILD))
+$(info # BUILD_TYPE=$(BUILD_TYPE))
+
+# Disallow cross builds on Windows/Linux for now
+# (since those builds are not out-of-source as required for cross-builds)
+ifeq "$(CROSS_BUILD)" "YES"
+ifeq "$(WINDOWS)" "YES"
+$(error Cross-builds currently not allowed on Windows)
+endif
+ifeq "$(LINUX)" "YES"
+$(error Cross-builds currently not allowed on Linux)
+endif
+endif
+
+MAC_OS_X_VERSION_MIN_REQUIRED=101100
+OSX_HOST_VERSION_MIN_STRING=10.11
+
+ifndef IPHONEOS_DEPLOYMENT_TARGET
+	IOS_VERSION_TARGET_STRING=10.0
+else ifeq "$(IPHONEOS_DEPLOYMENT_TARGET)" ""
+	IOS_VERSION_TARGET_STRING=10.0
+else
+	IOS_VERSION_TARGET_STRING=$(IPHONEOS_DEPLOYMENT_TARGET)
+endif
+
+ifndef MACOSX_DEPLOYMENT_TARGET
+	OSX_VERSION_TARGET_STRING=10.12
+else ifeq "$(MACOSX_DEPLOYMENT_TARGET)" ""
+	OSX_VERSION_TARGET_STRING=10.12
+else
+	OSX_VERSION_TARGET_STRING=$(MACOSX_DEPLOYMENT_TARGET)
+endif
+
+ifndef WATCHOS_DEPLOYMENT_TARGET
+	WATCHOS_VERSION_TARGET_STRING=3.0
+else ifeq "$(WATCHOS_DEPLOYMENT_TARGET)" ""
+	WATCHOS_VERSION_TARGET_STRING=3.0
+else
+	WATCHOS_VERSION_TARGET_STRING=$(WATCHOS_DEPLOYMENT_TARGET)
+endif
+
+ifndef TVOS_DEPLOYMENT_TARGET
+	TVOS_VERSION_TARGET_STRING=10.0
+else ifeq "$(TVOS_DEPLOYMENT_TARGET)" ""
+	TVOS_VERSION_TARGET_STRING=10.0
+else
+	TVOS_VERSION_TARGET_STRING=$(TVOS_DEPLOYMENT_TARGET)
+endif
+
+$(info # IOS_VERSION_TARGET_STRING=$(IOS_VERSION_TARGET_STRING))
+$(info # OSX_VERSION_TARGET_STRING=$(OSX_VERSION_TARGET_STRING))
+$(info # WATCHOS_VERSION_TARGET_STRING=$(WATCHOS_VERSION_TARGET_STRING))
+$(info # TVOS_VERSION_TARGET_STRING=$(TVOS_VERSION_TARGET_STRING))
+
+ifeq "$(BUILD_TYPE)" "DEVICE"
+	ifeq "$(WATCHOS)" "1"
+		ICU_TARGET_VERSION := -mwatchos-version-min=$(WATCHOS_VERSION_TARGET_STRING)
+	else ifeq "$(TVOS)" "1"
+		ICU_TARGET_VERSION := -mtvos-version-min=$(TVOS_VERSION_TARGET_STRING)
+	else
+		ICU_TARGET_VERSION := -miphoneos-version-min=$(IOS_VERSION_TARGET_STRING)
+	endif
+else ifeq "$(BUILD_TYPE)" "SIMULATOR"
+	ifeq "$(WATCHOS)" "1"
+		ICU_TARGET_VERSION := -mwatchos-simulator-version-min=$(WATCHOS_VERSION_TARGET_STRING)
+	else ifeq "$(TVOS)" "1"
+		ICU_TARGET_VERSION := -mtvos-simulator-version-min=$(TVOS_VERSION_TARGET_STRING)
+	else
+		ICU_TARGET_VERSION := -mios-simulator-version-min=$(IOS_VERSION_TARGET_STRING)
+	endif
+else
+	ICU_TARGET_VERSION :=
+endif
+$(info # ICU_TARGET_VERSION=$(ICU_TARGET_VERSION))
+
+
+DISABLE_DRAFT:=$(ICU_FOR_EMBEDDED_TRAINS)
+ifeq "$(DISABLE_DRAFT)" "YES"
+	DRAFT_FLAG=--disable-draft
+else
+	DRAFT_FLAG=
+endif
+
+# For some reason, under cygwin, bash uname is not found, and
+# sh uname does not produce a result with -p or -m. So we just
+# hardcode here.
+ifeq "$(WINDOWS)" "YES"
+	UNAME_PROCESSOR:=i386
+else
+	UNAME_PROCESSOR:=$(shell uname -p)
+endif
+
+ifneq "$(RC_ARCHS)" ""
+	INSTALLHDRS_ARCH=-arch $(shell echo $(RC_ARCHS) | cut -d' ' -f1)
+else
+	INSTALLHDRS_ARCH=
+endif
+$(info # INSTALLHDRS_ARCH=$(INSTALLHDRS_ARCH))
+$(info # buildhost=$(UNAME_PROCESSOR))
+
+
+# FORCEENDIAN below is to override silly configure behavior in which if
+# __APPLE_CC__ is defined and archs are in { ppc, ppc64, i386, x86_64 }
+# then it assumes a universal build (ac_cv_c_bigendian=universal) with
+# data file initially built big-endian.
+#
+ifeq "$(CROSS_BUILD)" "YES"
+	RC_ARCHS_FIRST=$(shell echo $(RC_ARCHS) | cut -d' ' -f1)
+	TARGET_SPEC=$(RC_ARCHS_FIRST)-apple-darwin15.0.0
+	ENV_CONFIGURE_ARCHS=-arch $(RC_ARCHS_FIRST)
+	ICUPKGTOOLIBS="$(CROSSHOST_OBJROOT)/lib:$(CROSSHOST_OBJROOT)/stubdata"
+	ICUPKGTOOL=$(CROSSHOST_OBJROOT)/bin/icupkg
+	ifeq "$(filter-out i386 x86_64,$(RC_ARCHS))" ""
+		FORCEENDIAN= ac_cv_c_bigendian=no
+	else
+		FORCEENDIAN=
+	endif
+else ifeq "$(LINUX)" "YES"
+	TARGET_SPEC=$(UNAME_PROCESSOR)-unknown-linux-gnu
+	ENV_CONFIGURE_ARCHS=
+	ICUPKGTOOLIBS="$(OBJROOT_CURRENT)/lib:$(OBJROOT_CURRENT)/stubdata"
+	ICUPKGTOOL=$(OBJROOT_CURRENT)/bin/icupkg
+	FORCEENDIAN=
+else
+	TARGET_SPEC=$(UNAME_PROCESSOR)-apple-darwin15.0.0
+	ENV_CONFIGURE_ARCHS=
+	ICUPKGTOOLIBS="$(OBJROOT_CURRENT)/lib:$(OBJROOT_CURRENT)/stubdata"
+	ICUPKGTOOL=$(OBJROOT_CURRENT)/bin/icupkg
+	FORCEENDIAN=
+endif
+$(info # TARGET_SPEC=$(TARGET_SPEC))
+$(info # ENV_CONFIGURE_ARCHS=$(ENV_CONFIGURE_ARCHS))
+
+ICU_TARGET_VERSION_FOR_TZ_EXTRA :=
+ifeq "$(BUILD_TYPE)" "SIMULATOR"
+	ICU_TARGET_VERSION_FOR_TZ_EXTRA := -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING)
+endif
+
+ifeq "$(BUILD_TYPE)" "DEVICE"
+	THUMB_FLAG = -mthumb
+else
+	THUMB_FLAG =
+endif
+
+# even for a crossbuild host build, we want to use the target's latest tzdata as pointed to by latest_tzdata.tar.gz;
+# first try RC_EMBEDDEDPROJECT_DIR (<rdar://problem/28141177>), else SDKPATH.
+ifdef RC_EMBEDDEDPROJECT_DIR
+	ifeq "$(shell test -L $(RC_EMBEDDEDPROJECT_DIR)/TimeZoneData/usr/local/share/tz/latest_tzdata.tar.gz && echo YES )" "YES"
+		export TZDATA:=$(RC_EMBEDDEDPROJECT_DIR)/TimeZoneData/usr/local/share/tz/$(shell readlink $(RC_EMBEDDEDPROJECT_DIR)/TimeZoneData/usr/local/share/tz/latest_tzdata.tar.gz)
+	endif
+endif
+ifndef TZDATA
+	ifeq "$(shell test -L $(SDKPATH)/usr/local/share/tz/latest_tzdata.tar.gz && echo YES )" "YES"
+		export TZDATA:=$(SDKPATH)/usr/local/share/tz/$(shell readlink $(SDKPATH)/usr/local/share/tz/latest_tzdata.tar.gz)
+	endif
+endif
+$(info # RC_EMBEDDEDPROJECT_DIR=$(RC_EMBEDDEDPROJECT_DIR))
+$(info # TZDATA=$(TZDATA))
+
+APPLE_INTERNAL_DIR=/AppleInternal
+DSYMTOOL := /usr/bin/dsymutil
+DSYMSUFFIX := .dSYM
+
 #################################
 # Headers
 #################################
 
 # For installhdrs. Not every compiled module has an associated header. Normally,
-# ICU installs headers as a sub-targe of the install target. But since we only want
+# ICU installs headers as a sub-target of the install target. But since we only want
 # certain libraries to install (and since we link all of our own .o modules), we need
 # invoke the headers targets ourselves. This may be problematic because there isn't a
 # good way to dist-clean afterwards...we need to do explicit dist-cleans, especially if
 # install the extra libraries.
 
 EXTRA_HDRS =
-# EXTRA_HDRS = ./extra/ustdio/ ./layout/ 
-HDR_MAKE_SUBDIR = ./common/ ./i18n/ $(EXTRA_HDRS)
+# EXTRA_HDRS = ./extra/ustdio/ ./layout/
+ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES"
+    HDR_MAKE_SUBDIR = ./common/ ./i18n/ $(EXTRA_HDRS)
+else ifeq "$(WINDOWS)" "YES"
+    HDR_MAKE_SUBDIR = ./common/ ./i18n/ $(EXTRA_HDRS)
+else
+    HDR_MAKE_SUBDIR = ./common/ ./i18n/ ./io/ $(EXTRA_HDRS)
+endif
+ifeq "$(WINDOWS)" "YES"
+	PRIVATE_HDR_PREFIX=$(APPLE_INTERNAL_DIR)
+else ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES"
+	HDR_PREFIX=/usr
+	PRIVATE_HDR_PREFIX=/usr/local
+else
+	PRIVATE_HDR_PREFIX=/usr/local
+endif
 
 #################################
 # Install
 #################################
 
-# For install. We currently don't install EXTRA_LIBS. We also don't install the data 
-# directly into the ICU library. It is now installed at /usr/share/icu/*.dat. Thus we 
+# For install. We currently don't install EXTRA_LIBS. We also don't install the data
+# directly into the ICU library. It is now installed at /usr/share/icu/*.dat. Thus we
 # don't use DATA_OBJ anymore. This could change if we decide to move the data back into
 # the icucore monolithic library.
 
 INSTALL = /usr/bin/install
 COMMON_OBJ = ./common/*.o
 I18N_OBJ = ./i18n/*.o
+IO_OBJ = ./io/*.o
 STUB_DATA_OBJ = ./stubdata/*.o
-COMMON_SRC = $(OBJROOT)/common/*.c
-I18N_SRC = $(OBJROOT)/i18n/*.c
-STUB_DATA_SRC = $(OBJROOT)/stubdata/*.c
 EXTRA_LIBS =
 #EXTRA_LIBS =./extra/ ./layout/ ./tools/ctestfw/ ./tools/toolutil/
 #DATA_OBJ = ./data/out/build/*.o
+ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES"
+    DYLIB_OBJS=$(COMMON_OBJ) $(I18N_OBJ) $(STUB_DATA_OBJ)
+else ifeq "$(WINDOWS)" "YES"
+    DYLIB_OBJS=$(COMMON_OBJ) ./common/common.res $(I18N_OBJ) $(STUB_DATA_OBJ)
+else
+    DYLIB_OBJS=$(COMMON_OBJ) $(I18N_OBJ) $(IO_OBJ) $(STUB_DATA_OBJ)
+endif
+
+#################################
+# Sources
+#################################
+
+# For installsrc (B&I)
+# Note that installsrc is run on the system from which ICU is submitted, which
+# may be a different environment than the one for a which a build is targeted.
+
+INSTALLSRC_VARFILES=./ICU_embedded.order \
+	./minimalapis.txt ./minimalapisTest.c ./minimalpatchconfig.txt ./windowspatchconfig.txt ./patchconfig.txt ./crosshostpatchconfig.txt \
+	BuildICUForAAS_script.bat EXPORT.APPLE
 
 #################################
 # Cleaning
@@ -73,55 +602,223 @@ EXTRA_LIBS =
 
 #We need to clean after installing.
 
-EXTRA_CLEAN = 
+EXTRA_CLEAN =
 
 # Some directories aren't cleaned recursively. Clean them manually...
 MANUAL_CLEAN_TOOLS = ./tools/dumpce
 MANUAL_CLEAN_EXTRA = ./extra/scrptrun ./samples/layout ./extra/ustdio ./extra
-MANUAL_CLEAN_TEST = ./test/collperf ./test/iotest ./test/letest ./test/thaitest ./test/threadtest ./test/testmap ./test 
+MANUAL_CLEAN_TEST = ./test/collperf ./test/iotest ./test/letest ./test/thaitest ./test/threadtest ./test/testmap ./test
 MANUAL_CLEAN_SAMPLE = ./samples/layout ./samples
 
-CLEAN_SUBDIR = ./stubdata ./common ./i18n ./layout ./layoutex ./data ./tools ./$(MANUAL_CLEAN_TOOLS) $(MANUAL_CLEAN_EXTRA) $(MANUAL_CLEAN_TEST) $(MANUAL_CLEAN_SAMPLE) 
+CLEAN_SUBDIR = ./stubdata ./common ./i18n ./io ./layout ./layoutex ./data ./tools ./$(MANUAL_CLEAN_TOOLS) $(MANUAL_CLEAN_EXTRA) $(MANUAL_CLEAN_TEST) $(MANUAL_CLEAN_SAMPLE)
 
 #################################
 # Config flags
 #################################
 
-CONFIG_FLAGS = --disable-renaming --disable-extras --disable-ustdio --disable-layout \
-	--disable-samples --with-data-packaging=archive --prefix=/usr/local \
-	--srcdir=$(SRCROOT)/icuSources
+ifeq "$(WINDOWS)" "YES"
+	ifeq "$(ARCH64)" "YES"
+		CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples --disable-icuio \
+			--with-data-packaging=library --prefix=$(PRIVATE_HDR_PREFIX) --with-library-bits=64 \
+			$(DRAFT_FLAG)
+	else
+		CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples --disable-icuio \
+			--with-data-packaging=library --prefix=$(PRIVATE_HDR_PREFIX) --with-library-bits=32 \
+			$(DRAFT_FLAG)
+	endif
+else ifeq "$(LINUX)" "YES"
+	ifeq "$(ARCH64)" "YES"
+		CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples \
+			--with-data-packaging=archive --prefix=$(PRIVATE_HDR_PREFIX) --with-library-bits=64 \
+			$(DRAFT_FLAG)
+	else
+		CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples \
+			--with-data-packaging=archive --prefix=$(PRIVATE_HDR_PREFIX) --with-library-bits=32 \
+			$(DRAFT_FLAG)
+	endif
+else ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES"
+	CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples \
+		--with-data-packaging=archive --prefix=$(PRIVATE_HDR_PREFIX) \
+		$(DRAFT_FLAG)
+else
+	CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples \
+		--with-data-packaging=archive --prefix=$(PRIVATE_HDR_PREFIX) \
+		$(DRAFT_FLAG)
+endif
 
 #################################
 # Install paths
 #################################
 
-# This may or may not be an appropriate name for the icu dylib. This naming scheme is 
-# an attempt to follow the icu convention in naming the dylib and then having symbolic 
-# links of easier to remember library names point it it. *UPDATE* the version and 
+# This may or may not be an appropriate name for the icu dylib. This naming scheme is
+# an attempt to follow the icu convention in naming the dylib and then having symbolic
+# links of easier to remember library names point it it. *UPDATE* the version and
 # sub-version variables as needed. The Core version should be 'A' until the core
 # version changes it's API...that is a new version isn't backwards compatible.
 # The ICU version/subversion should reflect the actual ICU version.
 
 LIB_NAME = icucore
-ICU_VERS = 32
-ICU_SUBVERS = 0
+ICU_VERS = 57
+ICU_SUBVERS = 1
 CORE_VERS = A
-DYLIB_SUFF = dylib
-libdir = /usr/lib/
 
-INSTALLED_DYLIB = lib$(LIB_NAME).$(CORE_VERS).$(DYLIB_SUFF)
+ifeq "$(WINDOWS)" "YES"
+	DYLIB_SUFF = dll
+	ifeq "$(ARCH64)" "YES"
+		winprogdir = /Program\ Files/Common\ Files/Apple/Apple\ Application\ Support/
+		winintlibdir = /AppleInternal/lib64/
+	else
+		winprogdir = /Program\ Files\ \(x86\)/Common\ Files/Apple/Apple\ Application\ Support/
+		winintlibdir = /AppleInternal/lib32/
+	endif
+	libdir =
+else ifeq "$(LINUX)" "YES"
+	DYLIB_SUFF = so
+	ifeq "$(ARCH64)" "YES"
+		libdir = /usr/lib64/
+	else
+		libdir = /usr/lib/
+	endif
+	winprogdir =
+	winintlibdir =
+else
+	DYLIB_SUFF = dylib
+	libdir = /usr/lib/
+	winprogdir =
+	winintlibdir =
+endif
+
 DYLIB = lib$(LIB_NAME).$(DYLIB_SUFF)
+DYLIB_DEBUG = lib$(LIB_NAME)_debug.$(DYLIB_SUFF)
+DYLIB_PROFILE = lib$(LIB_NAME)_profile.$(DYLIB_SUFF)
+ifeq "$(WINDOWS)" "YES"
+	INSTALLED_DYLIB = $(LIB_NAME).$(DYLIB_SUFF)
+	INSTALLED_DYLIB_DEBUG = $(LIB_NAME)_debug.$(DYLIB_SUFF)
+	INSTALLED_DYLIB_PROFILE = $(LIB_NAME)_profile.$(DYLIB_SUFF)
+else ifeq "$(LINUX)" "YES"
+	INSTALLED_DYLIB = lib$(LIB_NAME).$(DYLIB_SUFF)
+	INSTALLED_DYLIB_DEBUG = lib$(LIB_NAME)_debug.$(DYLIB_SUFF)
+	INSTALLED_DYLIB_PROFILE = lib$(LIB_NAME)_profile.$(DYLIB_SUFF)
+else
+	INSTALLED_DYLIB = lib$(LIB_NAME).$(CORE_VERS).$(DYLIB_SUFF)
+	INSTALLED_DYLIB_DEBUG = lib$(LIB_NAME).$(CORE_VERS)_debug.$(DYLIB_SUFF)
+	INSTALLED_DYLIB_PROFILE = lib$(LIB_NAME).$(CORE_VERS)_profile.$(DYLIB_SUFF)
+endif
+
+INSTALLED_DYLIB_icu = INSTALLED_DYLIB
+INSTALLED_DYLIB_debug = INSTALLED_DYLIB_DEBUG
+INSTALLED_DYLIB_profile = INSTALLED_DYLIB_PROFILE
+DYLIB_icu = DYLIB
+DYLIB_debug = DYLIB_DEBUG
+DYLIB_profile = DYLIB_PROFILE
 
 #################################
 # Data files
 #################################
 
-datadir=/usr/share/icu/
 OPEN_SOURCE_VERSIONS_DIR=/usr/local/OpenSourceVersions/
 OPEN_SOURCE_LICENSES_DIR=/usr/local/OpenSourceLicenses/
-ICU_DATA_DIR= data/out
+
 B_DATA_FILE=icudt$(ICU_VERS)b.dat
 L_DATA_FILE=icudt$(ICU_VERS)l.dat
+DATA_BUILD_SUBDIR= data/out
+DATA_INSTALL_DIR=/usr/share/icu/
+
+# DATA_LOOKUP_DIR is what the target ICU_DATA_DIR gets set to in CFLAGS, CXXFLAGS;
+# DATA_LOOKUP_DIR_BUILDHOST is what any crossbuild host ICU_DATA_DIR gets set to.
+# Formerly we had DATA_LOOKUP_DIR=/var/db/icu/ for embedded non-simulator builds
+# and DATA_LOOKUP_DIR=/usr/share/icu/ for everything else. Now all systems look
+# in the same place for the main data file:
+DATA_LOOKUP_DIR=/usr/share/icu/
+DATA_LOOKUP_DIR_BUILDHOST=/usr/share/icu/
+
+# Timezone data file(s)
+# ICU will look for /var/db/timezone/icutz/icutz44l.dat
+# If directory or file is not present, the timesone data in
+# current data file e.g. /usr/share/icu/icudt56l.dat will be used.
+# Currently we are not conditionalizing the definition of
+# TZDATA_LOOKUP_DIR as in
+#	ifeq "$(BUILD_TYPE)" "DEVICE"
+#		TZDATA_LOOKUP_DIR = /var/db/timezone/icutz
+#	else
+#	...
+# since the code stats the path for TZDATA_LOOKUP_DIR and does
+# not try to use it if it does not exist. We could define it
+# as TZDATA_LOOKUP_DIR = /usr/share/icutz when not needed...
+# TZDATA_LOOKUP_DIR is passed to compiler as U_TIMEZONE_FILES_DIR
+# TZDATA_PACKAGE is passed to compiler as U_TIMEZONE_PACKAGE
+TZDATA_LOOKUP_DIR = /var/db/timezone/icutz
+TZDATA_PACKAGE = icutz44l
+TZDATA_FORMAT_STRING = "44l"
+TZDATA_FORMAT_FILE = icutzformat.txt
+
+
+# Name of runtime environment variable to get the prefix path for DATA_LOOKUP_DIR
+# Currently we are only using this for LINUX, should also use for iOS simulator
+ifeq "$(LINUX)" "YES"
+	DATA_DIR_PREFIX_ENV_VAR=APPLE_FRAMEWORKS_ROOT
+else
+	DATA_DIR_PREFIX_ENV_VAR=
+endif
+
+#################################
+# Tools
+#################################
+
+localtooldir=/usr/local/bin/
+locallibdir=/usr/local/lib/
+
+INFOTOOL = icuinfo
+INFOTOOL_OBJS = ./tools/icuinfo/icuinfo.o ./tools/toolutil/udbgutil.o ./tools/toolutil/uoptions.o
+
+ICUZDUMPTOOL = icuzdump
+ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES"
+    ICUZDUMPTOOL_OBJS = ./tools/tzcode/icuzdump.o $(IO_OBJ)
+else
+    ICUZDUMPTOOL_OBJS = ./tools/tzcode/icuzdump.o
+endif
+
+TOOLSLIB_NAME = icutu
+TOOLS_DYLIB = libicutu.$(DYLIB_SUFF)
+TOOLS_DYLIB_OBJS = ./tools/toolutil/*.o
+
+# The following modified version enables the tz toools to be used on systems with ICU 55 or later.
+# It is used with the toolchain tools below.
+TOOLSLIB_NAME_FORTOOLS = icutux
+TOOLS_DYLIB_FORTOOLS = libicutux.$(DYLIB_SUFF)
+TOOLS_DYLIB_OBJS_FORTOOLS = ./tools/toolutil/collationinfo.o ./tools/toolutil/filestrm.o \
+./tools/toolutil/package.o ./tools/toolutil/pkg_icu.o ./tools/toolutil/pkgitems.o \
+./tools/toolutil/swapimpl.o ./tools/toolutil/toolutil.o ./tools/toolutil/ucbuf.o \
+./tools/toolutil/unewdata.o ./tools/toolutil/uoptions.o ./tools/toolutil/uparse.o \
+$(COMMON_OBJ) $(STUB_DATA_OBJ)
+
+ZICTOOL = icuzic
+ZICTOOL_OBJS = ./tools/tzcode/zic.o ./tools/tzcode/localtime.o ./tools/tzcode/asctime.o ./tools/tzcode/scheck.o ./tools/tzcode/ialloc.o
+
+RESTOOL = icugenrb
+RESTOOL_OBJS = ./tools/genrb/errmsg.o ./tools/genrb/genrb.o ./tools/genrb/parse.o ./tools/genrb/read.o ./tools/genrb/reslist.o ./tools/genrb/ustr.o \
+				./tools/genrb/rbutil.o ./tools/genrb/wrtjava.o ./tools/genrb/rle.o ./tools/genrb/wrtxml.o ./tools/genrb/prscmnts.o
+
+# note there is also a symbol ICUPKGTOOL which refers to the one used
+# internally which is linked against the separate uc and i18n libs.
+PKGTOOL = icupkg
+PKGTOOL_OBJS = ./tools/icupkg/icupkg.o
+
+TZ2ICUTOOL = tz2icu
+TZ2ICUTOOL_OBJS = ./tools/tzcode/tz2icu.o
+
+GENBRKTOOL = icugenbrk
+GENBRKTOOL_OBJS = ./tools/genbrk/genbrk.o
+
+#################################
+# CLDR file(s)
+# e.g. supplementalData.xml, per <rdar://problem/13426014>
+# These are like internal headers in that they are only installed for
+# (other) projects to build against, not needed at runtime.
+# Therefore install during installhdrs.
+#################################
+
+CLDRFILESDIR=/usr/local/share/cldr
 
 #################################
 # Environment variables
@@ -133,32 +830,166 @@ L_DATA_FILE=icudt$(ICU_VERS)l.dat
 # into CFLAGS (and CXXFLAGS). This controls a lot of the external variables so we don't
 # need to directly modify the ICU files (like for CFLAGS, etc).
 
-LIBOVERRIDES=LIBICUDT="-L$(OBJROOT) -l$(LIB_NAME)" \
-	LIBICUUC="-L$(OBJROOT) -l$(LIB_NAME)" \
-	LIBICUI18N="-L$(OBJROOT) -l$(LIB_NAME)"
-
-ENV=	APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
-	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -g -Os -fno-exceptions" \
-	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -g -Os -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
-	RC_ARCHS="$(RC_ARCHS)" \
-	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
-	
-ENV_CONFIGURE=	APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
-	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" -g -Os -fno-exceptions" \
-	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" -g -Os -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
-	RC_ARCHS="$(RC_ARCHS)" \
-	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
-
-ENV_DEBUG = APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
-	CFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -O0 -g -fno-exceptions" \
-	CXXFLAGS="-DICU_DATA_DIR=\"\\\"/usr/share/icu/\\\"\" $(RC_ARCHS:%=-arch %) -O0 -g -fno-exceptions -fno-rtti -fvisibility-inlines-hidden" \
-	RC_ARCHS="$(RC_ARCHS)" \
-	DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+LIBOVERRIDES=LIBICUDT="-L$(OBJROOT_CURRENT) -l$(LIB_NAME)" \
+	LIBICUUC="-L$(OBJROOT_CURRENT) -l$(LIB_NAME)" \
+	LIBICUI18N="-L$(OBJROOT_CURRENT) -l$(LIB_NAME)"
+
+# For normal Windows builds set the ENV= options here; for debug Windows builds set the ENV_DEBUG=
+# options here and also the update the LINK.EXE lines in the TARGETS section below.
+ifeq "$(WINDOWS)" "YES"
+	ifeq "$(ARCH64)" "YES"
+		ENV= CFLAGS="/O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES" \
+			CXXFLAGS="/O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /Zc:wchar_t" \
+			LDFLAGS="/NXCOMPAT /DYNAMICBASE /DEBUG /OPT:REF"
+	else
+		ENV= CFLAGS="/O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES" \
+			CXXFLAGS="/O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /Zc:wchar_t" \
+			LDFLAGS="/NXCOMPAT /SAFESEH /DYNAMICBASE /DEBUG /OPT:REF"
+	endif
+	ENV_CONFIGURE= CPPFLAGS="-DU_DISABLE_RENAMING=1 $(DEFINE_BUILD_LEVEL)" \
+		CFLAGS="/O2 /Ob2 /MD /GF /GS /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES" \
+		CXXFLAGS="/O2 /Ob2 /MD /GF /GS /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /Zc:wchar_t"
+	ENV_DEBUG= CFLAGS="/O2 /Ob2 /MDd /GF /GS /Zi /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES" \
+		CXXFLAGS="/O2 /Ob2 /MDd /GF /GS /Zi /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc" \
+		LDFLAGS="/DEBUG /DYNAMICBASE"
+	ENV_PROFILE=
+else ifeq "$(LINUX)" "YES"
+	ifeq "$(ARCH64)" "YES"
+		ENV_CONFIGURE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+			CPPFLAGS="-DU_DISABLE_RENAMING=1 $(DEFINE_BUILD_LEVEL)"  \
+			CC="$(CC)" \
+			CXX="$(CXX)" \
+			CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -fno-exceptions -fvisibility=hidden" \
+			CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+			TZDATA="$(TZDATA)" \
+			DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib64"
+
+		ENV= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+			CC="$(CC)" \
+			CXX="$(CXX)" \
+			CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -fno-exceptions -fvisibility=hidden" \
+			CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+			TZDATA="$(TZDATA)" \
+			DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib64"
+
+		ENV_DEBUG= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+			CC="$(CC)" \
+			CXX="$(CXX)" \
+			CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -O0 -gfull -fno-exceptions -fvisibility=hidden" \
+			CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -O0 -gfull -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+			TZDATA="$(TZDATA)" \
+			DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib64"
+
+		ENV_PROFILE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+			CC="$(CC)" \
+			CXX="$(CXX)" \
+			CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -pg -fno-exceptions -fvisibility=hidden" \
+			CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -pg -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+			TZDATA="$(TZDATA)" \
+			DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib64"
+	else
+		ENV_CONFIGURE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+			CPPFLAGS="-DU_DISABLE_RENAMING=1 $(DEFINE_BUILD_LEVEL)" \
+			CC="$(CC)" \
+			CXX="$(CXX)" \
+			CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -fno-exceptions -fvisibility=hidden" \
+			CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+			TZDATA="$(TZDATA)" \
+			DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+		ENV= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+			CC="$(CC)" \
+			CXX="$(CXX)" \
+			CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -fno-exceptions -fvisibility=hidden" \
+			CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+			TZDATA="$(TZDATA)" \
+			DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+		ENV_DEBUG= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+			CC="$(CC)" \
+			CXX="$(CXX)" \
+			CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -O0 -gfull -fno-exceptions -fvisibility=hidden" \
+			CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -O0 -gfull -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+			TZDATA="$(TZDATA)" \
+			DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+		ENV_PROFILE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+			CC="$(CC)" \
+			CXX="$(CXX)" \
+			CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -pg -fno-exceptions -fvisibility=hidden" \
+			CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -pg -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+			TZDATA="$(TZDATA)" \
+			DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+	endif
+else
+	CPPOPTIONS =
+	ENV_CONFIGURE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+		CPPFLAGS="$(DEFINE_BUILD_LEVEL) -DSTD_INSPIRED -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) $(ISYSROOT) $(ENV_CONFIGURE_ARCHS)" \
+		CC="$(CC)" \
+		CXX="$(CXX)" \
+		CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(ENV_CONFIGURE_ARCHS) $(ICU_TARGET_VERSION) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(ISYSROOT) $(THUMB_FLAG)" \
+		CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(ENV_CONFIGURE_ARCHS) $(ICU_TARGET_VERSION) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG)" \
+		RC_ARCHS="$(RC_ARCHS)" $(FORCEENDIAN)\
+		TZDATA="$(TZDATA)" \
+		DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+	ENV= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+		CC="$(CC)" \
+		CXX="$(CXX)" \
+		CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(ISYSROOT) $(THUMB_FLAG)" \
+		CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG)" \
+		RC_ARCHS="$(RC_ARCHS)" \
+		TZDATA="$(TZDATA)" \
+		DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+	ENV_DEBUG= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+		CC="$(CC)" \
+		CXX="$(CXX)" \
+		CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -O0 -gfull -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(ISYSROOT) $(THUMB_FLAG)" \
+		CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -O0 -gfull -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG)" \
+		RC_ARCHS="$(RC_ARCHS)" \
+		TZDATA="$(TZDATA)" \
+		DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+	ENV_PROFILE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+		CC="$(CC)" \
+		CXX="$(CXX)" \
+		CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -pg -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(ISYSROOT) $(THUMB_FLAG)" \
+		CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -pg -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG)" \
+		RC_ARCHS="$(RC_ARCHS)" \
+		TZDATA="$(TZDATA)" \
+		DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+	ENV_CONFIGURE_BUILDHOST= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+		CPPFLAGS="$(DEFINE_BUILD_LEVEL) -DSTD_INSPIRED -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) $(HOSTISYSROOT)" \
+		CC="$(HOSTCC)" \
+		CXX="$(HOSTCXX)" \
+		CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR_BUILDHOST)\\\"\" -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) $(HOSTISYSROOT) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden" \
+		CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR_BUILDHOST)\\\"\" -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) $(HOSTISYSROOT) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+		TZDATA="$(TZDATA)" \
+		DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+	ENV_BUILDHOST= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \
+		CC="$(HOSTCC)" \
+		CXX="$(HOSTCXX)" \
+		CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR_BUILDHOST)\\\"\" -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) $(HOSTISYSROOT) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden" \
+		CXXFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR_BUILDHOST)\\\"\" -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) $(HOSTISYSROOT) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \
+		TZDATA="$(TZDATA)" \
+		DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib"
+
+endif
 
 ENV_icu = ENV
 ENV_debug = ENV_DEBUG
+ENV_profile = ENV_PROFILE
 
-ORDERFILE=/usr/local/lib/OrderFiles/libicucore.order
+ifeq "$(BUILD_TYPE)" "DEVICE"
+	ORDERFILE=$(SDKPATH)/AppleInternal/OrderFiles/libicucore.order
+else ifeq "$(BUILD_TYPE)" "SIMULATOR"
+	ORDERFILE=$(SRCROOT)/ICU_embedded.order
+else
+	ORDERFILE=/usr/local/lib/OrderFiles/libicucore.order
+endif
 ifeq "$(shell test -f $(ORDERFILE) && echo YES )" "YES"
        SECTORDER_FLAGS=-sectorder __TEXT __text $(ORDERFILE)
 else
@@ -172,148 +1003,518 @@ endif
 #################################
 #################################
 
-.PHONY : icu check installsrc installhdrs clean install debug debug-install
+.PHONY : icu check installsrc installhdrs installhdrsint clean install debug debug-install \
+crossbuildhost icutztoolsforsdk
 .DELETE_ON_ERROR :
 
-icu debug : $(OBJROOT)/Makefile
-	(cd $(OBJROOT); \
-		$(MAKE) $($(ENV_$@)); \
-		tmpfile=`mktemp -t weakexternal` || exit 1; \
-		nm -m $(COMMON_OBJ) $(I18N_OBJ) $(STUB_DATA_OBJ) | fgrep "weak external" | fgrep -v "undefined" | sed -e 's/.*weak external //' | uniq | cat >$$tmpfile; \
-		$($(ENV_$@)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \
-			$(RC_ARCHS:%=-arch %) $(CXXFLAGS) $(LDFLAGS) -single_module $(SECTORDER_FLAGS) -unexported_symbols_list $$tmpfile \
-			-install_name $(libdir)$(INSTALLED_DYLIB) -o ./$(INSTALLED_DYLIB) $(COMMON_OBJ) $(I18N_OBJ) $(STUB_DATA_OBJ); \
-		if test -f ./$(ICU_DATA_DIR)/$(B_DATA_FILE); then \
-			ln -fs ./$(ICU_DATA_DIR)/$(B_DATA_FILE); \
+# Rule for adjusting sources for different train types.
+# Assumes current directory is icuSources to be patched.
+# This may be:
+#   $(SRCROOT)/icuSources for installsrc, or
+#   $(OBJROOT_CURRENT) if sources are copied for e.g. a local make.
+#
+# The various patchconfig files should assume the current directory is icuSources.
+#
+# Note that if sources have been installed by installsrc (only run as part of buildit
+# or B&I builds), then
+#    $(SRCROOT)/.git is not present, and
+#    ADJUST_SOURCES has already have been run.
+# Otherwise, if we are doing a local build (e.g. make check, make install), then
+#    $(SRCROOT)/.git is present, and
+#    ADJUST_SOURCES has not been run (run it after copying sources to OBJROOT_CURRENT)
+#
+
+ADJUST_SOURCES = \
+		if test "$(ICU_FOR_EMBEDDED_TRAINS)" = "YES"; then \
+			patch -p1 <$(SRCROOT)/minimalpatchconfig.txt; \
+		elif test "$(WINDOWS)" = "YES"; then \
+			patch -p1 <$(SRCROOT)/windowspatchconfig.txt; \
 		else \
-			DYLD_LIBRARY_PATH="./lib:./stubdata" \
-			./bin/icuswap -tb ./$(ICU_DATA_DIR)/$(L_DATA_FILE) $(B_DATA_FILE); \
+			patch -p1 <$(SRCROOT)/patchconfig.txt; \
 		fi; \
-		if test -f ./$(ICU_DATA_DIR)/$(L_DATA_FILE); then \
-		    ln -fs ./$(ICU_DATA_DIR)/$(L_DATA_FILE); \
+		if test "$(WINDOWS)" = "YES"; then \
+			mv data/unidata/base_unidata/*.txt data/unidata/; \
+			mv data/unidata/norm2/base_norm2/*.txt data/unidata/norm2/; \
+			mv data/in/base_in/*.nrm data/in/; \
+			mv data/in/base_in/*.icu data/in/; \
+		elif test "$(LINUX)" = "YES"; then \
+			mv data/unidata/base_unidata/*.txt data/unidata/; \
+			mv data/unidata/norm2/base_norm2/*.txt data/unidata/norm2/; \
+			mv data/in/base_in/*.nrm data/in/; \
+			mv data/in/base_in/*.icu data/in/; \
+		fi
+
+
+icu debug profile : $(OBJROOT_CURRENT)/Makefile
+	echo "# make for target";
+	(cd $(OBJROOT_CURRENT); \
+		$(MAKE) $($(ENV_$@)); \
+		if test "$(WINDOWS)" = "YES"; then \
+			(cd common; \
+				rc.exe /folibicuuc.res $(CPPFLAGS) -DU_RELEASE=1 -D_CRT_SECURE_NO_DEPRECATE -I. -I../i18n \
+					"-DDEFAULT_ICU_PLUGINS=\"/AppleInternal/lib/icu\" " -DU_LOCAL_SERVICE_HOOK=1 libicuuc.rc; \
+			); \
+			(cd i18n; \
+				rc.exe /folibicuin.res $(CPPFLAGS) -DU_RELEASE=1 -D_CRT_SECURE_NO_DEPRECATE -I. -I../common libicuin.rc; \
+			); \
+			if test "$@" = "debug"; then \
+				(cd common; \
+					LINK.EXE /subsystem:console /DLL /nologo /base:"0x4a800000" /DYNAMICBASE /DEBUG \
+						/IMPLIB:../lib/libicuuc_$@.lib /out:../lib/libicuuc_$@.dll \
+						*.o libicuuc.res ../stubdata/icudt.lib advapi32.lib; \
+				); \
+				(cd i18n; \
+					LINK.EXE /subsystem:console /DLL /nologo /base:"0x4a900000" /DYNAMICBASE /DEBUG \
+						/IMPLIB:../lib/libicuin_$@.lib /out:../lib/libicuin_$@.dll \
+						*.o libicuin.res ../lib/libicuuc_$@.lib ../stubdata/icudt.lib advapi32.lib; \
+				); \
+			else \
+				(cd common; \
+					rm -f ../lib/libicuuc.dll.manifest; \
+					if test "$(ARCH64)" = "YES"; then \
+						LINK.EXE /DLL /NXCOMPAT /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \
+							/IMPLIB:../lib/libicuuc.lib /out:../lib/libicuuc.dll \
+							*.o libicuuc.res ../stubdata/icudt.lib advapi32.lib; \
+					else \
+						LINK.EXE /DLL /NXCOMPAT /SAFESEH /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \
+							/IMPLIB:../lib/libicuuc.lib /out:../lib/libicuuc.dll \
+							*.o libicuuc.res ../stubdata/icudt.lib advapi32.lib; \
+					fi; \
+					mt.exe -nologo -manifest ../lib/libicuuc.dll.manifest -outputresource:"../lib/libicuuc.dll;2"; \
+				); \
+				(cd i18n; \
+					rm -f ../lib/libicuin.dll.manifest; \
+					if test "$(ARCH64)" = "YES"; then \
+						LINK.EXE /DLL /NXCOMPAT /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \
+							/IMPLIB:../lib/libicuin.lib /out:../lib/libicuin.dll \
+							*.o libicuin.res ../lib/libicuuc.lib ../stubdata/icudt.lib advapi32.lib; \
+					else \
+						LINK.EXE /DLL /NXCOMPAT /SAFESEH /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \
+							/IMPLIB:../lib/libicuin.lib /out:../lib/libicuin.dll \
+							*.o libicuin.res ../lib/libicuuc.lib ../stubdata/icudt.lib advapi32.lib; \
+					fi; \
+					mt.exe -nologo -manifest ../lib/libicuin.dll.manifest -outputresource:"../lib/libicuin.dll;2"; \
+				); \
+				if test "$(ARCH64)" != "YES"; then \
+					mkdir -p lib/shim; \
+					(cd common; \
+						rm -f icuuc40shim.o; \
+						rm -f ../lib/icuuc40.dll.manifest; \
+						cl -DU_DISABLE_RENAMING=1 -DU_ICU_VERSION_BUILDLEVEL_NUM=$(ICU_BUILD) \
+							-DU_RELEASE=1 -D_CRT_SECURE_NO_DEPRECATE -I. -I../i18n \
+							-DU_LOCAL_SERVICE_HOOK=1 -DWIN32 -DU_COMMON_IMPLEMENTATION \
+							/O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /Zc:wchar_t \
+							/c /Foicuuc40shim.o icuuc40shim.cpp; \
+						rc.exe /foicuuc40shim.res $(CPPFLAGS) -DU_RELEASE=1 -D_CRT_SECURE_NO_DEPRECATE -I. -I../i18n \
+							"-DDEFAULT_ICU_PLUGINS=\"/AppleInternal/lib/icu\" " -DU_LOCAL_SERVICE_HOOK=1 icuuc40shim.rc; \
+						LINK.EXE /DLL /NXCOMPAT /SAFESEH /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \
+							/IMPLIB:../lib/shim/icuuc.lib /out:../lib/icuuc40.dll \
+							icuuc40shim.o icuuc40shim.res ../lib/libicuuc.lib ../stubdata/icudt.lib advapi32.lib; \
+						mt.exe -nologo -manifest ../lib/icuuc40.dll.manifest -outputresource:"../lib/icuuc40.dll;2"; \
+					); \
+					(cd i18n; \
+						rm -f icuin40shim.o; \
+						rm -f ../lib/icuin40.dll.manifest; \
+						cl -DU_DISABLE_RENAMING=1 -DU_ICU_VERSION_BUILDLEVEL_NUM=$(ICU_BUILD) \
+							-DU_RELEASE=1 -D_CRT_SECURE_NO_DEPRECATE -I. -I../common \
+							-DU_LOCAL_SERVICE_HOOK=1 -DWIN32 -DU_I18N_IMPLEMENTATION \
+							/O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /Zc:wchar_t \
+							/c /Foicuin40shim.o icuin40shim.cpp; \
+						rc.exe /foicuin40shim.res $(CPPFLAGS) -DU_RELEASE=1 -D_CRT_SECURE_NO_DEPRECATE -I. -I../common \
+							"-DDEFAULT_ICU_PLUGINS=\"/AppleInternal/lib/icu\" " -DU_LOCAL_SERVICE_HOOK=1 icuin40shim.rc; \
+						LINK.EXE /DLL /NXCOMPAT /SAFESEH /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \
+							/IMPLIB:../lib/shim/icuin.lib /out:../lib/icuin40.dll \
+							icuin40shim.o icuin40shim.res ../lib/libicuin.lib ../stubdata/icudt.lib advapi32.lib; \
+						mt.exe -nologo -manifest ../lib/icuin40.dll.manifest -outputresource:"../lib/icuin40.dll;2"; \
+					); \
+				fi; \
+			fi; \
 		else \
-			DYLD_LIBRARY_PATH="./lib:./stubdata" \
-			./bin/icuswap -tl ./$(ICU_DATA_DIR)/$(B_DATA_FILE) $(L_DATA_FILE); \
+			if test "$(LINUX)" = "YES"; then \
+				if test "$(ARCH64)" = "YES"; then \
+					$($(ENV_$@)) $(CXX) \
+						-m64 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden \
+						$(CXXFLAGS) $(LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname,$($(INSTALLED_DYLIB_$@)) -Wl,-L/usr/lib64/ -ldl \
+						-o ./$($(INSTALLED_DYLIB_$@)) $(DYLIB_OBJS); \
+				else \
+					$($(ENV_$@)) $(CXX) \
+						-m32 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden \
+						$(CXXFLAGS) $(LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname,$($(INSTALLED_DYLIB_$@)) -ldl \
+						-o ./$($(INSTALLED_DYLIB_$@)) $(DYLIB_OBJS); \
+				fi; \
+			else \
+				tmpfile=`mktemp -t weakexternal.XXXXXX` || exit 1; \
+				$(NM) -m $(RC_ARCHS:%=-arch %) $(DYLIB_OBJS) | fgrep "weak external" | fgrep -v "undefined" | sed -e 's/.*weak external[^_]*//' | sort | uniq | cat >$$tmpfile; \
+				$($(ENV_$@)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \
+					$(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) \
+					$(CXXFLAGS) $(LDFLAGS) -single_module $(SECTORDER_FLAGS) -unexported_symbols_list $$tmpfile -dead_strip \
+					-install_name $(libdir)$($(INSTALLED_DYLIB_$@)) -o ./$($(INSTALLED_DYLIB_$@)) $(DYLIB_OBJS); \
+				if test "$@" = "icu"; then \
+					ln -fs  $(INSTALLED_DYLIB) $(DYLIB); \
+					echo '# build' $(INFOTOOL) 'linked against' $(LIB_NAME) ; \
+					$($(ENV_$@)) $(CXX) $(RC_ARCHS:%=-arch %) -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) \
+						$(LDFLAGS) -dead_strip -o ./$(INFOTOOL) $(INFOTOOL_OBJS) -L./ -l$(LIB_NAME) ; \
+					echo '# build' $(TOOLS_DYLIB) 'linked against' $(LIB_NAME) ; \
+					$($(ENV_$@)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \
+						$(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) \
+						$(CXXFLAGS) $(LDFLAGS) -single_module \
+						-install_name $(locallibdir)$(TOOLS_DYLIB) -o ./$(TOOLS_DYLIB) $(TOOLS_DYLIB_OBJS) -L./ -l$(LIB_NAME) ; \
+					echo '# build' $(ICUZDUMPTOOL) 'linked against' $(TOOLSLIB_NAME) $(LIB_NAME) ; \
+					$($(ENV_$@)) $(LINK.cc) $(RC_ARCHS:%=-arch %) -g -Os $(ISYSROOT) $(THUMB_FLAG) --std=c++0x \
+						-dead_strip -o ./$(ICUZDUMPTOOL) $(ICUZDUMPTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME) -l$(LIB_NAME); \
+				fi; \
+			fi; \
+			if test -f ./$(DATA_BUILD_SUBDIR)/$(B_DATA_FILE); then \
+				ln -fs ./$(DATA_BUILD_SUBDIR)/$(B_DATA_FILE); \
+			fi; \
+			if test -f ./$(DATA_BUILD_SUBDIR)/$(L_DATA_FILE); then \
+				ln -fs ./$(DATA_BUILD_SUBDIR)/$(L_DATA_FILE); \
+			else \
+				DYLD_LIBRARY_PATH=$(ICUPKGTOOLIBS) \
+				$(ICUPKGTOOL) -tl ./$(DATA_BUILD_SUBDIR)/$(B_DATA_FILE) $(L_DATA_FILE); \
+			fi; \
+			printf $(TZDATA_FORMAT_STRING) > $(TZDATA_FORMAT_FILE); \
 		fi; \
 	);
 
+crossbuildhost : $(CROSSHOST_OBJROOT)/Makefile
+	echo "# make for crossbuild host";
+	(cd $(CROSSHOST_OBJROOT); \
+		$(MAKE) $($(ENV_BUILDHOST)); \
+	);
+
+# For the install-icutztoolsforsdk target, SDKROOT will always be an OSX SDK root.
+# If the sources were installed using the minimalpatchconfig.txt patch, then
+# we need to patch using crosshostpatchconfig.txt as for $(CROSSHOST_OBJROOT)/Makefile
+# (otherwise we ignore the patch in crosshostpatchconfig.txt, using -N)
+icutztoolsforsdk : $(OBJROOT_CURRENT)/Makefile
+	echo "# make icutztoolsforsdk";
+	(cd $(OBJROOT_CURRENT); \
+		if test ! -d $(SRCROOT)/.git ; then patch -N -p1 <$(SRCROOT)/crosshostpatchconfig.txt; fi; \
+		$(MAKE) $($(ENV)); \
+		echo '# build' $(TOOLS_DYLIB_FORTOOLS) 'linked against' $(LIB_NAME) ; \
+		$($(ENV)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \
+			-g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) \
+			$(CXXFLAGS) $(LDFLAGS) -single_module \
+			-install_name $(locallibdir)$(TOOLS_DYLIB_FORTOOLS) -o ./$(TOOLS_DYLIB_FORTOOLS) $(TOOLS_DYLIB_OBJS_FORTOOLS) -L./ -l$(LIB_NAME) ; \
+		echo '# build' $(ZICTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) ; \
+		$($(ENV_BUILDHOST)) $(CXX) -g -Os -isysroot $(HOSTSDKPATH) \
+			$(LDFLAGS) -dead_strip -o ./$(ZICTOOL) $(ZICTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) ; \
+		echo '# build' $(RESTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) $(LIB_NAME) ; \
+		$($(ENV_BUILDHOST)) $(CXX) -g -Os -isysroot $(HOSTSDKPATH) \
+			$(LDFLAGS) -dead_strip -o ./$(RESTOOL) $(RESTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) -l$(LIB_NAME) ; \
+		echo '# build' $(PKGTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) ; \
+		$($(ENV_BUILDHOST)) $(CXX) -g -Os -isysroot $(HOSTSDKPATH) \
+			$(LDFLAGS) -dead_strip -o ./$(PKGTOOL) $(PKGTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) ; \
+		echo '# build' $(TZ2ICUTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) ; \
+		$($(ENV_BUILDHOST)) $(CXX) -g -Os -isysroot $(HOSTSDKPATH) \
+			$(LDFLAGS) -dead_strip -o ./$(TZ2ICUTOOL) $(TZ2ICUTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) ; \
+		echo '# build' $(GENBRKTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) ; \
+		$($(ENV_BUILDHOST)) $(CXX) -g -Os -isysroot $(HOSTSDKPATH) \
+			$(LDFLAGS) -dead_strip -o ./$(GENBRKTOOL) $(GENBRKTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) ; \
+	);
+
 check : icu
-	(cd $(OBJROOT); \
-		$(MAKE) $(ENV) check; \
+ifneq "$(CROSS_BUILD)" "YES"
+	(cd $(OBJROOT_CURRENT); \
+		ICU_DATA=$(OBJROOT_CURRENT) $(MAKE) $(ENV) check; \
 	);
+else
+	$(warning check not supported for cross-build)
+endif
+
+check-debug: debug
+ifneq "$(CROSS_BUILD)" "YES"
+	(cd $(OBJROOT_CURRENT); \
+		ICU_DATA=$(OBJROOT_CURRENT) $(MAKE) $(ENV_DEBUG) check; \
+	);
+else
+	$(warning check not supported for cross-build)
+endif
 
 samples: icu
-	(cd $(OBJROOT)/samples; \
+	(cd $(OBJROOT_CURRENT)/samples; \
 		$(MAKE) $(ENV_DEBUG) $(LIBOVERRIDES); \
 	);
 
 extra: icu
-	(cd $(OBJROOT)/extra; \
+	(cd $(OBJROOT_CURRENT)/extra; \
 		$(MAKE) $(ENV_DEBUG) $(LIBOVERRIDES); \
 	);
 
-$(OBJROOT)/Makefile : 
-	if test ! -d $(OBJROOT); then \
-		mkdir -p $(OBJROOT); \
+ifneq "$(CROSS_BUILD)" "YES"
+$(OBJROOT_CURRENT)/Makefile :
+else
+$(OBJROOT_CURRENT)/Makefile : crossbuildhost
+endif
+	if test ! -d $(OBJROOT_CURRENT); then \
+		mkdir -p $(OBJROOT_CURRENT); \
 	fi;
-	(cd $(OBJROOT); $(ENV_CONFIGURE) $(SRCROOT)/icuSources/configure $(CONFIG_FLAGS);)
+	cp -Rpf $(SRCROOT)/icuSources/* $(OBJROOT_CURRENT)/;
+	(cd $(OBJROOT_CURRENT); \
+		if test -d $(SRCROOT)/.git ; then $(ADJUST_SOURCES); fi; \
+		if test "$(WINDOWS)" = "YES"; then \
+			echo "# configure for target"; \
+			$(ENV_CONFIGURE) ./runConfigureICU Cygwin/MSVC $(CONFIG_FLAGS); \
+		elif test "$(LINUX)" = "YES"; then \
+			echo "# configure for target"; \
+			$(ENV_CONFIGURE) ./runConfigureICU Linux $(CONFIG_FLAGS); \
+		elif test "$(CROSS_BUILD)" = "YES"; then \
+			echo "# configure for crossbuild target"; \
+			$(ENV_CONFIGURE) ./configure --host=$(TARGET_SPEC) --with-cross-build=$(CROSSHOST_OBJROOT) $(CONFIG_FLAGS); \
+		else \
+			echo "# configure for non-crossbuild target"; \
+			$(ENV_CONFIGURE) ./runConfigureICU MacOSX $(CONFIG_FLAGS); \
+		fi; \
+	);
 
-debug-install:	debug installhdrs
-	if test ! -d $(DSTROOT)$(libdir)/; then \
-		$(INSTALL) -d -m 0775 $(DSTROOT)$(libdir)/; \
-	fi;
-	$(INSTALL) -b -m 0664 $(OBJROOT)/$(INSTALLED_DYLIB) $(DSTROOT)$(libdir)$(INSTALLED_DYLIB)
-	(cd $(DSTROOT)$(libdir); \
-	ln -fs  $(INSTALLED_DYLIB) $(DYLIB));
-	for subdir in $(EXTRA_LIBS); do \
-		(cd $(OBJROOT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV_DEBUG) install-library;) \
-	done;
-	if test ! -d $(DSTROOT)$(datadir)/; then \
-		$(INSTALL) -d -m 0755 $(DSTROOT)$(datadir)/; \
-	fi;	
-	if test -f $(OBJROOT)/$(B_DATA_FILE); then \
-		$(INSTALL) -b -m 0644  $(OBJROOT)/$(B_DATA_FILE) $(DSTROOT)$(datadir)$(B_DATA_FILE); \
-	fi;
-	if test -f $(OBJROOT)/$(L_DATA_FILE); then \
-		$(INSTALL) -b -m 0644  $(OBJROOT)/$(L_DATA_FILE) $(DSTROOT)$(datadir)$(L_DATA_FILE); \
-	fi;
-	if test ! -d $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; then \
-		$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; \
-	fi;
-	$(INSTALL) -b -m 0644 $(SRCROOT)/ICU.plist $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)ICU.plist;
-	if test ! -d $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; then \
-		$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; \
+# for the tools that build the data file, cannot set UDATA_DEFAULT_ACCESS = UDATA_ONLY_PACKAGES
+# as minimalpatchconfig.txt does; need different patches for the host build. Thus
+# we have to use crosshostpatchconfig.txt to undo the udata.h changes that would have
+# been made for ICU_FOR_EMBEDDED_TRAINS builds.
+$(CROSSHOST_OBJROOT)/Makefile :
+	if test ! -d $(CROSSHOST_OBJROOT); then \
+		mkdir -p $(CROSSHOST_OBJROOT); \
 	fi;
-	$(INSTALL) -b -m 0644 $(SRCROOT)/license.html $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)ICU.html;
+	cp -Rpf $(SRCROOT)/icuSources/* $(CROSSHOST_OBJROOT);
+	(cd $(CROSSHOST_OBJROOT); \
+		if test -d $(SRCROOT)/.git; then $(ADJUST_SOURCES); fi; \
+		if test "$(ICU_FOR_EMBEDDED_TRAINS)" = "YES"; then \
+			patch -p1 <$(SRCROOT)/crosshostpatchconfig.txt; \
+		fi; \
+		echo "# configure for crossbuild host"; \
+		$(ENV_CONFIGURE_BUILDHOST) ./runConfigureICU MacOSX $(CONFIG_FLAGS); \
+	);
 
 #################################
 # B&I TARGETS
 #################################
 
-# Since our sources are in icuSources (ignore the ICU subdirectory for now), we wish to 
+# Since our sources are in icuSources (ignore the ICU subdirectory for now), we wish to
 # copy them to somewhere else. We tar it to stdout, cd to the appropriate directory, and
-# untar from stdin.  We then look for all the CVS directories and remove them. We may have 
+# untar from stdin.  We then look for all the CVS directories and remove them. We may have
 # to remove the .cvsignore files also.
 
 installsrc :
 	if test ! -d $(SRCROOT); then mkdir $(SRCROOT); fi;
 	if test -d $(SRCROOT)/icuSources ; then rm -rf $(SRCROOT)/icuSources; fi;
-	tar cf - ./makefile ./ICU.plist ./license.html ./icuSources | (cd $(SRCROOT) ; tar xfp -); \
-	for i in `find $(SRCROOT)/icuSources/ | grep "CVS$$"` ; do \
-		if test -d $$i ; then \
-			rm -rf $$i; \
-		fi; \
-	done
-	for j in `find $(SRCROOT)/icuSources/ | grep ".cvsignore"` ; do \
-		if test -f $$j ; then \
-			rm -f $$j; \
-		fi; \
-	done
+	tar cf - ./makefile ./ICU.plist ./LICENSE ./icuSources ./cldrFiles $(INSTALLSRC_VARFILES) | (cd $(SRCROOT) ; tar xfp -); \
+	(cd $(SRCROOT)/icuSources; $(ADJUST_SOURCES) );
 
-# This works. Just not for ~ in the DSTROOT. We run configure first (in case it hasn't 
-# been already). Then we make the install-headers target on specific makefiles (since 
+# This works. Just not for ~ in the DSTROOT. We run configure first (in case it hasn't
+# been already). Then we make the install-headers target on specific makefiles (since
 # not every subdirectory/sub-component has a install-headers target).
 
-installhdrs : $(OBJROOT)/Makefile
-	(cd $(OBJROOT); \
-	for subdir in $(HDR_MAKE_SUBDIR); do \
-		(cd $$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV) install-headers); \
-	done;);
+# installhdrs should be no-op for BUILD_TYPE=TOOL
+ifeq "$(BUILD_TYPE)" "TOOL"
+installhdrs :
+else
+installhdrs : installhdrsint
+endif
 
-# We run configure and run make first. This generates the .o files. We then link them 
-# all up together into libicucore. Then we put it into its install location, create 
-# symbolic links, and then strip the main dylib. Then install the remaining libraries. 
+MKINSTALLDIRS=$(SHELL) $(SRCROOT)/icuSources/mkinstalldirs
+INSTALL_DATA=${INSTALL} -m 644
+
+ifeq "$(RC_XBS)" "YES"
+installhdrsint :
+else
+installhdrsint : $(OBJROOT_CURRENT)/Makefile
+endif
+	(if test -d $(SRCROOT)/.git; then cd $(OBJROOT_CURRENT); else cd $(SRCROOT)/icuSources/; fi; \
+		$(MKINSTALLDIRS) $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/; \
+		for subdir in $(HDR_MAKE_SUBDIR); do \
+			echo "# Subdir $$subdir"; \
+			(cd $$subdir/unicode; \
+				for i in *.h; do \
+	 				echo "$(INSTALL_DATA) $$i $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/"; \
+	 				$(INSTALL_DATA) $$i $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/ || exit; \
+				done; \
+			); \
+		done; \
+		if test "$(ICU_FOR_EMBEDDED_TRAINS)" = "YES"; then \
+			if test ! -d $(DSTROOT)/$(HDR_PREFIX)/include/unicode/; then \
+				$(INSTALL) -d -m 0755 $(DSTROOT)/$(HDR_PREFIX)/include/unicode/; \
+			fi; \
+			if test -d $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/; then \
+				(cd $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode; \
+					for i in *.h; do \
+						if fgrep -q -x $$i $(SRCROOT)/minimalapis.txt ; then \
+							mv $$i $(DSTROOT)/$(HDR_PREFIX)/include/unicode ; \
+						fi ; \
+					done ); \
+				if test ! "$(RC_XBS)" = "YES"; then \
+					echo "# Not building for XBS, so running minimal test"; \
+					$(CC) $(SRCROOT)/minimalapisTest.c $(INSTALLHDRS_ARCH) $(ISYSROOT) -nostdinc \
+						-I $(DSTROOT)/$(HDR_PREFIX)/include/ -I $(SDKPATH)/usr/include/ -E > /dev/null ; \
+				fi; \
+			fi; \
+			if test ! -d $(DSTROOT)/$(CLDRFILESDIR)/; then \
+				$(INSTALL) -d -m 0755 $(DSTROOT)/$(CLDRFILESDIR)/; \
+			fi; \
+			$(INSTALL) -b -m 0644  $(SRCROOT)/cldrFiles/supplementalData.xml $(DSTROOT)/$(CLDRFILESDIR)/supplementalData.xml; \
+		fi; \
+	);
+
+# We run configure and run make first. This generates the .o files. We then link them
+# all up together into libicucore. Then we put it into its install location, create
+# symbolic links, and then strip the main dylib. Then install the remaining libraries.
 # We cleanup the sources folder.
-	
-install : installhdrs icu
-	if test ! -d $(DSTROOT)$(libdir)/; then \
-		$(INSTALL) -d -m 0775 $(DSTROOT)$(libdir)/; \
-	fi;
-	$(INSTALL) -b -m 0664 $(OBJROOT)/$(INSTALLED_DYLIB) $(DSTROOT)$(libdir)$(INSTALLED_DYLIB)
-	(cd $(DSTROOT)$(libdir); \
-	ln -fs  $(INSTALLED_DYLIB) $(DYLIB));
-	cp $(OBJROOT)/$(INSTALLED_DYLIB) $(SYMROOT)/$(INSTALLED_DYLIB);
-	strip -x -u -r -S $(DSTROOT)$(libdir)$(INSTALLED_DYLIB);
-	for subdir in $(EXTRA_LIBS); do \
-		(cd $(OBJROOT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT) $(ENV) install-library;) \
-	done;
-	if test ! -d $(DSTROOT)$(datadir)/; then \
-		$(INSTALL) -d -m 0755 $(DSTROOT)$(datadir)/; \
-	fi;	
-	if test -f $(OBJROOT)/$(B_DATA_FILE); then \
-		$(INSTALL) -b -m 0644  $(OBJROOT)/$(B_DATA_FILE) $(DSTROOT)$(datadir)$(B_DATA_FILE); \
-	fi;
-	if test -f $(OBJROOT)/$(L_DATA_FILE); then \
-		$(INSTALL) -b -m 0644  $(OBJROOT)/$(L_DATA_FILE) $(DSTROOT)$(datadir)$(L_DATA_FILE); \
-	fi;
-	if test ! -d $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; then \
-		$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)/; \
+
+install : installhdrsint icu
+	if test "$(WINDOWS)" = "YES"; then \
+		if test ! -d $(DSTROOT)/$(winprogdir)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(winprogdir)/; \
+		fi; \
+		if test ! -d $(DSTROOT)/$(winintlibdir)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(winintlibdir)/; \
+		fi; \
+		$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuuc.lib $(DSTROOT)/$(winintlibdir)libicuuc.lib; \
+		$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuuc.pdb $(DSTROOT)/$(winprogdir)libicuuc.pdb; \
+		$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/libicuuc.dll $(DSTROOT)/$(winprogdir)libicuuc.dll; \
+		$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuin.lib $(DSTROOT)/$(winintlibdir)libicuin.lib; \
+		$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuin.pdb $(DSTROOT)/$(winprogdir)libicuin.pdb; \
+		$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/libicuin.dll $(DSTROOT)/$(winprogdir)libicuin.dll; \
+		$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/icudt$(ICU_VERS).dll $(DSTROOT)/$(winprogdir)icudt$(ICU_VERS).dll; \
+		if test "$(ARCH64)" != "YES"; then \
+			$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/shim/icuuc.lib $(DSTROOT)/$(winintlibdir)icuuc.lib; \
+			$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/icuuc40.pdb $(DSTROOT)/$(winprogdir)icuuc40.pdb; \
+			$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/icuuc40.dll $(DSTROOT)/$(winprogdir)icuuc40.dll; \
+			$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/shim/icuin.lib $(DSTROOT)/$(winintlibdir)icuin.lib; \
+			$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/icuin40.pdb $(DSTROOT)/$(winprogdir)icuin40.pdb; \
+			$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/icuin40.dll $(DSTROOT)/$(winprogdir)icuin40.dll; \
+		fi; \
+	else \
+		if test ! -d $(DSTROOT)/$(libdir)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(libdir)/; \
+		fi; \
+		$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(INSTALLED_DYLIB) $(DSTROOT)/$(libdir)$(INSTALLED_DYLIB); \
+		if test "$(LINUX)" = "YES"; then \
+			cp $(OBJROOT_CURRENT)/$(INSTALLED_DYLIB) $(SYMROOT_CURRENT)/$(INSTALLED_DYLIB); \
+			strip -x -S $(DSTROOT)/$(libdir)$(INSTALLED_DYLIB); \
+		else \
+			(cd $(DSTROOT)/$(libdir); \
+			ln -fs  $(INSTALLED_DYLIB) $(DYLIB)); \
+			cp $(OBJROOT_CURRENT)/$(INSTALLED_DYLIB) $(SYMROOT_CURRENT)/$(INSTALLED_DYLIB); \
+			$(DSYMTOOL) -o $(SYMROOT_CURRENT)/$(INSTALLED_DYLIB)$(DSYMSUFFIX) $(SYMROOT_CURRENT)/$(INSTALLED_DYLIB); \
+			$(STRIPCMD) -x -u -r -S $(DSTROOT)/$(libdir)$(INSTALLED_DYLIB); \
+		fi; \
+		for subdir in $(EXTRA_LIBS); do \
+			(cd $(OBJROOT_CURRENT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT)/ $(ENV) install-library;) \
+		done; \
+		if test ! -d $(DSTROOT)/$(DATA_INSTALL_DIR)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(DATA_INSTALL_DIR)/; \
+		fi; \
+		if test -f $(OBJROOT_CURRENT)/$(L_DATA_FILE); then \
+			$(INSTALL) -b -m 0644  $(OBJROOT_CURRENT)/$(L_DATA_FILE) $(DSTROOT)/$(DATA_INSTALL_DIR)$(L_DATA_FILE); \
+		fi; \
+		if test -f $(OBJROOT_CURRENT)/$(TZDATA_FORMAT_FILE); then \
+			$(INSTALL) -b -m 0644  $(OBJROOT_CURRENT)/$(TZDATA_FORMAT_FILE) $(DSTROOT)/$(DATA_INSTALL_DIR)$(TZDATA_FORMAT_FILE); \
+		fi; \
+		if test ! -d $(DSTROOT)/$(OPEN_SOURCE_VERSIONS_DIR)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(OPEN_SOURCE_VERSIONS_DIR)/; \
+		fi; \
+		$(INSTALL) -b -m 0644 $(SRCROOT)/ICU.plist $(DSTROOT)/$(OPEN_SOURCE_VERSIONS_DIR)ICU.plist; \
+		if test ! -d $(DSTROOT)/$(OPEN_SOURCE_LICENSES_DIR)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(OPEN_SOURCE_LICENSES_DIR)/; \
+		fi; \
+		$(INSTALL) -b -m 0644 $(SRCROOT)/LICENSE $(DSTROOT)/$(OPEN_SOURCE_LICENSES_DIR)ICU.txt; \
+		if test "$(LINUX)" != "YES"; then \
+			if test ! -d $(DSTROOT)/$(localtooldir)/; then \
+				$(INSTALL) -d -m 0755 $(DSTROOT)/$(localtooldir)/; \
+			fi; \
+			if test -f $(OBJROOT_CURRENT)/$(INFOTOOL); then \
+				echo '# install' $(INFOTOOL) 'to' $(DSTROOT)/$(localtooldir)$(INFOTOOL) ; \
+				$(INSTALL) -b -m 0755  $(OBJROOT_CURRENT)/$(INFOTOOL) $(DSTROOT)/$(localtooldir)$(INFOTOOL); \
+				cp $(OBJROOT_CURRENT)/$(INFOTOOL) $(SYMROOT_CURRENT)/$(INFOTOOL); \
+				$(DSYMTOOL) -o $(SYMROOT_CURRENT)/$(INFOTOOL)$(DSYMSUFFIX) $(SYMROOT_CURRENT)/$(INFOTOOL); \
+			fi; \
+			if test ! -d $(DSTROOT)/$(locallibdir)/; then \
+				$(INSTALL) -d -m 0755 $(DSTROOT)/$(locallibdir)/; \
+			fi; \
+			if test -f $(OBJROOT_CURRENT)/$(TOOLS_DYLIB); then \
+				echo '# install' $(TOOLS_DYLIB) 'to' $(DSTROOT)/$(locallibdir)$(TOOLS_DYLIB) ; \
+				$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(TOOLS_DYLIB) $(DSTROOT)/$(locallibdir)$(TOOLS_DYLIB); \
+				cp $(OBJROOT_CURRENT)/$(TOOLS_DYLIB) $(SYMROOT_CURRENT)/$(TOOLS_DYLIB); \
+				$(DSYMTOOL) -o $(SYMROOT_CURRENT)/$(TOOLS_DYLIB)$(DSYMSUFFIX) $(SYMROOT_CURRENT)/$(TOOLS_DYLIB); \
+			fi; \
+			if test -f $(OBJROOT_CURRENT)/$(ICUZDUMPTOOL); then \
+				echo '# install' $(ICUZDUMPTOOL) 'to' $(DSTROOT)/$(localtooldir)$(ICUZDUMPTOOL) ; \
+				$(INSTALL) -b -m 0755  $(OBJROOT_CURRENT)/$(ICUZDUMPTOOL) $(DSTROOT)/$(localtooldir)$(ICUZDUMPTOOL); \
+				cp $(OBJROOT_CURRENT)/$(ICUZDUMPTOOL) $(SYMROOT_CURRENT)/$(ICUZDUMPTOOL); \
+				$(DSYMTOOL) -o $(SYMROOT_CURRENT)/$(ICUZDUMPTOOL)$(DSYMSUFFIX) $(SYMROOT_CURRENT)/$(ICUZDUMPTOOL); \
+			fi; \
+		fi; \
 	fi;
-	$(INSTALL) -b -m 0644 $(SRCROOT)/ICU.plist $(DSTROOT)$(OPEN_SOURCE_VERSIONS_DIR)ICU.plist;
-	if test ! -d $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; then \
-		$(INSTALL) -d -m 0755 $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)/; \
+
+DEPEND_install_debug = debug
+DEPEND_install_profile = profile
+
+.SECONDEXPANSION:
+install_debug install_profile : $$(DEPEND_$$@)
+	if test "$(WINDOWS)" = "YES"; then \
+		if test ! -d $(DSTROOT)/$(winprogdir)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(winprogdir)/; \
+		fi; \
+		if test ! -d $(DSTROOT)/$(winintlibdir)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(winintlibdir)/; \
+		fi; \
+		$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuuc_$(DEPEND_$@).lib $(DSTROOT)/$(winintlibdir)libicuuc_$(DEPEND_$@).lib; \
+		$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuuc_$(DEPEND_$@).pdb $(DSTROOT)/$(winprogdir)libicuuc_$(DEPEND_$@).pdb; \
+		$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/libicuuc_$(DEPEND_$@).dll $(DSTROOT)/$(winprogdir)libicuuc_$(DEPEND_$@).dll; \
+		$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuin_$(DEPEND_$@).lib $(DSTROOT)/$(winintlibdir)libicuin_$(DEPEND_$@).lib; \
+		$(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuin_$(DEPEND_$@).pdb $(DSTROOT)/$(winprogdir)libicuin_$(DEPEND_$@).pdb; \
+		$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/libicuin_$(DEPEND_$@).dll $(DSTROOT)/$(winprogdir)libicuin_$(DEPEND_$@).dll; \
+	else \
+		if test ! -d $(DSTROOT)/$(libdir)/; then \
+			$(INSTALL) -d -m 0755 $(DSTROOT)/$(libdir)/; \
+		fi; \
+		$(INSTALL) -b -m 0664 $(OBJROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))) $(DSTROOT)/$(libdir)$($(INSTALLED_DYLIB_$(DEPEND_$@))); \
+		if test "$(LINUX)" = "YES"; then \
+			cp $(OBJROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))) $(SYMROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))); \
+			strip -x -S $(DSTROOT)/$(libdir)$($(INSTALLED_DYLIB_$(DEPEND_$@))); \
+		else \
+			(cd $(DSTROOT)/$(libdir); \
+			ln -fs  $($(INSTALLED_DYLIB_$(DEPEND_$@))) $($(DYLIB_$(DEPEND_$@)))); \
+			cp $(OBJROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))) $(SYMROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))); \
+			$(STRIPCMD) -x -u -r -S $(DSTROOT)/$(libdir)$($(INSTALLED_DYLIB_$(DEPEND_$@))); \
+		fi; \
+		for subdir in $(EXTRA_LIBS); do \
+			(cd $(OBJROOT_CURRENT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT)/ $(ENV) install-library;) \
+		done; \
 	fi;
-	$(INSTALL) -b -m 0644 $(SRCROOT)/license.html $(DSTROOT)$(OPEN_SOURCE_LICENSES_DIR)ICU.html;
 
 clean :
 	-rm -rf $(OBJROOT)
+
+# For the install-icutztoolsforsdk target, SDKROOT will always be an OSX SDK root
+install-icutztoolsforsdk : icutztoolsforsdk
+	if test ! -d $(DSTROOT)$(localtooldir)/; then \
+		$(INSTALL) -d -m 0755 $(DSTROOT)$(localtooldir)/; \
+	fi;
+	if test ! -d $(DSTROOT)$(locallibdir)/; then \
+		$(INSTALL) -d -m 0755 $(DSTROOT)$(locallibdir)/; \
+	fi;
+	if test -f $(OBJROOT_CURRENT)/$(TOOLS_DYLIB_FORTOOLS); then \
+		echo '# install' $(TOOLS_DYLIB_FORTOOLS) 'to' $(DSTROOT)$(locallibdir)$(TOOLS_DYLIB_FORTOOLS) ; \
+		$(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(TOOLS_DYLIB_FORTOOLS) $(DSTROOT)$(locallibdir)$(TOOLS_DYLIB_FORTOOLS); \
+	fi;
+	if test -f $(OBJROOT_CURRENT)/$(ZICTOOL); then \
+		echo '# install' $(ZICTOOL) 'to' $(DSTROOT)$(localtooldir)$(ZICTOOL) ; \
+		$(INSTALL) -b -m 0755  $(OBJROOT_CURRENT)/$(ZICTOOL) $(DSTROOT)$(localtooldir)$(ZICTOOL); \
+	fi;
+	if test -f $(OBJROOT_CURRENT)/$(RESTOOL); then \
+		echo '# install' $(RESTOOL) 'to' $(DSTROOT)$(localtooldir)$(RESTOOL) ; \
+		$(INSTALL) -b -m 0755  $(OBJROOT_CURRENT)/$(RESTOOL) $(DSTROOT)$(localtooldir)$(RESTOOL); \
+	fi;
+	if test -f $(OBJROOT_CURRENT)/$(PKGTOOL); then \
+		echo '# install' $(PKGTOOL) 'to' $(DSTROOT)$(localtooldir)$(PKGTOOL) ; \
+		$(INSTALL) -b -m 0755  $(OBJROOT_CURRENT)/$(PKGTOOL) $(DSTROOT)$(localtooldir)$(PKGTOOL); \
+	fi;
+	if test -f $(OBJROOT_CURRENT)/$(TZ2ICUTOOL); then \
+		echo '# install' $(TZ2ICUTOOL) 'to' $(DSTROOT)$(localtooldir)$(TZ2ICUTOOL) ; \
+		$(INSTALL) -b -m 0755  $(OBJROOT_CURRENT)/$(TZ2ICUTOOL) $(DSTROOT)$(localtooldir)$(TZ2ICUTOOL); \
+	fi;
+	if test -f $(OBJROOT_CURRENT)/$(GENBRKTOOL); then \
+		echo '# install' $(GENBRKTOOL) 'to' $(DSTROOT)$(localtooldir)$(GENBRKTOOL) ; \
+		$(INSTALL) -b -m 0755  $(OBJROOT_CURRENT)/$(GENBRKTOOL) $(DSTROOT)$(localtooldir)$(GENBRKTOOL); \
+	fi;