enum URegexpFlag. All desired flags
* are bitwise-ORed together.
- * @param pe Receives the position (line and column nubers) of any syntax
+ * @param pe Receives the position (line and column numbers) of any syntax
* error within the source regular expression string. If this
* information is not wanted, pass NULL for this parameter.
* @param status Receives error detected by this function.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*
*/
-U_DRAFT URegularExpression * U_EXPORT2
+U_STABLE URegularExpression * U_EXPORT2
uregex_open( const UChar *pattern,
int32_t patternLength,
uint32_t flags,
UParseError *pe,
UErrorCode *status);
+/**
+ * Open (compile) an ICU regular expression. Compiles the regular expression in
+ * string form into an internal representation using the specified match mode flags.
+ * The resulting regular expression handle can then be used to perform various
+ * matching operations.
+ *
+ * The contents of the pattern UText will be extracted and saved. Ownership of the
+ * UText struct itself remains with the caller. This is to match the behavior of
+ * uregex_open().
+ *
+ * @param pattern The Regular Expression pattern to be compiled.
+ * @param flags Flags that alter the default matching behavior for
+ * the regular expression, UREGEX_CASE_INSENSITIVE, for
+ * example. For default behavior, set this parameter to zero.
+ * See enum URegexpFlag. All desired flags
+ * are bitwise-ORed together.
+ * @param pe Receives the position (line and column numbers) of any syntax
+ * error within the source regular expression string. If this
+ * information is not wanted, pass NULL for this parameter.
+ * @param status Receives error detected by this function.
+ *
+ * @stable ICU 4.6
+ */
+U_STABLE URegularExpression * U_EXPORT2
+uregex_openUText(UText *pattern,
+ uint32_t flags,
+ UParseError *pe,
+ UErrorCode *status);
+
/**
* Open (compile) an ICU regular expression. The resulting regular expression
* handle can then be used to perform various matching operations.
@@ -112,27 +175,28 @@ uregex_open( const UChar *pattern,
* is supplied as an 8 bit char * string in the default code page.
*
* @param pattern The Regular Expression pattern to be compiled,
- * NUL termintated.
+ * NUL terminated.
* @param flags Flags that alter the default matching behavior for
* the regular expression, UREGEX_CASE_INSENSITIVE, for
* example. For default behavior, set this parameter to zero.
* See enum URegexpFlag. All desired flags
* are bitwise-ORed together.
- * @param pe Receives the position (line and column nubers) of any syntax
+ * @param pe Receives the position (line and column numbers) of any syntax
* error within the source regular expression string. If this
* information is not wanted, pass NULL for this parameter.
* @param status Receives errors detected by this function.
* @return The URegularExpression object representing the compiled
* pattern.
*
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT URegularExpression * U_EXPORT2
+#if !UCONFIG_NO_CONVERSION
+U_STABLE URegularExpression * U_EXPORT2
uregex_openC( const char *pattern,
uint32_t flags,
UParseError *pe,
UErrorCode *status);
-
+#endif
@@ -141,18 +205,37 @@ uregex_openC( const char *pattern,
* was holding.
*
* @param regexp The regular expression to be closed.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT void U_EXPORT2
+U_STABLE void U_EXPORT2
uregex_close(URegularExpression *regexp);
+#if U_SHOW_CPLUSPLUS_API
+
+U_NAMESPACE_BEGIN
+
+/**
+ * \class LocalURegularExpressionPointer
+ * "Smart pointer" class, closes a URegularExpression via uregex_close().
+ * For most methods see the LocalPointerBase base class.
+ *
+ * @see LocalPointerBase
+ * @see LocalPointer
+ * @stable ICU 4.4
+ */
+U_DEFINE_LOCAL_OPEN_POINTER(LocalURegularExpressionPointer, URegularExpression, uregex_close);
+
+U_NAMESPACE_END
+
+#endif // U_SHOW_CPLUSPLUS_API
+
/**
* Make a copy of a compiled regular expression. Cloning a regular
* expression is faster than opening a second instance from the source
* form of the expression, and requires less memory.
*
* Note that the current input string and the position of any matched text - * within it are not cloned; only the pattern itself and and the + * within it are not cloned; only the pattern itself and the * match mode flags are copied. *
* Cloning can be particularly useful to threaded applications that perform @@ -162,13 +245,14 @@ uregex_close(URegularExpression *regexp); * @param regexp The compiled regular expression to be cloned. * @param status Receives indication of any errors encountered * @return the cloned copy of the compiled regular expression. - * @draft ICU 3.0 + * @stable ICU 3.0 */ -U_DRAFT URegularExpression * U_EXPORT2 +U_STABLE URegularExpression * U_EXPORT2 uregex_clone(const URegularExpression *regexp, UErrorCode *status); /** - * Return a pointer to the source form of the pattern for this regular expression. + * Returns a pointer to the source form of the pattern for this regular expression. + * This function will work even if the pattern was originally specified as a UText. * * @param regexp The compiled regular expression. * @param patLength This output parameter will be set to the length of the @@ -181,13 +265,27 @@ uregex_clone(const URegularExpression *regexp, UErrorCode *status); * owned by the regular expression object, and must not be * altered or deleted by the application. The returned string * will remain valid until the regular expression is closed. - * @draft ICU 3.0 + * @stable ICU 3.0 */ -U_DRAFT const UChar * U_EXPORT2 -uregex_pattern(const URegularExpression *regexp, - int32_t *patLength, - UErrorCode *status); +U_STABLE const UChar * U_EXPORT2 +uregex_pattern(const URegularExpression *regexp, + int32_t *patLength, + UErrorCode *status); +/** + * Returns the source text of the pattern for this regular expression. + * This function will work even if the pattern was originally specified as a UChar string. + * + * @param regexp The compiled regular expression. + * @param status Receives errors detected by this function. + * @return the pattern text. The storage for the text is owned by the regular expression + * object, and must not be altered or deleted. + * + * @stable ICU 4.6 + */ +U_STABLE UText * U_EXPORT2 +uregex_patternUText(const URegularExpression *regexp, + UErrorCode *status); /** * Get the match mode flags that were specified when compiling this regular expression. @@ -195,9 +293,9 @@ uregex_pattern(const URegularExpression *regexp, * @param regexp The compiled regular expression. * @return The match mode flags * @see URegexpFlag - * @draft ICU 3.0 + * @stable ICU 3.0 */ -U_DRAFT int32_t U_EXPORT2 +U_STABLE int32_t U_EXPORT2 uregex_flags(const URegularExpression *regexp, UErrorCode *status); @@ -220,18 +318,44 @@ uregex_flags(const URegularExpression *regexp, * @param textLength The length of the subject text, or -1 if the string * is NUL terminated. * @param status Receives errors detected by this function. - * @draft ICU 3.0 + * @stable ICU 3.0 */ -U_DRAFT void U_EXPORT2 +U_STABLE void U_EXPORT2 uregex_setText(URegularExpression *regexp, const UChar *text, int32_t textLength, UErrorCode *status); + +/** + * Set the subject text string upon which the regular expression will look for matches. + * This function may be called any number of times, allowing the regular + * expression pattern to be applied to different strings. + *
+ * Regular expression matching operations work directly on the application's + * string data; only a shallow clone is made. The subject string data must not be + * altered after calling this function until after all regular expression + * operations involving this string data are completed. + * + * @param regexp The compiled regular expression. + * @param text The subject text string. + * @param status Receives errors detected by this function. + * + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_setUText(URegularExpression *regexp, + UText *text, + UErrorCode *status); + /** * Get the subject text that is currently associated with this - * regular expression object. This simply returns whatever string - * pointer was previously supplied via uregex_setText(). + * regular expression object. If the input was supplied using uregex_setText(), + * that pointer will be returned. Otherwise, the characters in the input will + * be extracted to a buffer and returned. In either case, ownership remains + * with the regular expression object. + * + * This function will work even if the input was originally specified as a UText. * * @param regexp The compiled regular expression. * @param textLength The length of the string is returned in this output parameter. @@ -240,81 +364,237 @@ uregex_setText(URegularExpression *regexp, * the text is known in advance to be a NUL terminated * string. * @param status Receives errors detected by this function. - * @return Poiner to the subject text string currently associated with + * @return Pointer to the subject text string currently associated with * this regular expression. - * @draft ICU 3.0 + * @stable ICU 3.0 */ -U_DRAFT const UChar * U_EXPORT2 +U_STABLE const UChar * U_EXPORT2 uregex_getText(URegularExpression *regexp, int32_t *textLength, UErrorCode *status); /** - * Attempts to match the input string, beginning at startIndex, against the pattern. - * To succeed, the match must extend to the end of the input string. + * Get the subject text that is currently associated with this + * regular expression object. + * + * This function will work even if the input was originally specified as a UChar string. + * + * @param regexp The compiled regular expression. + * @param dest A mutable UText in which to store the current input. + * If NULL, a new UText will be created as an immutable shallow clone + * of the actual input string. + * @param status Receives errors detected by this function. + * @return The subject text currently associated with this regular expression. + * If a pre-allocated UText was provided, it will always be used and returned. + * + * @stable ICU 4.6 + */ +U_STABLE UText * U_EXPORT2 +uregex_getUText(URegularExpression *regexp, + UText *dest, + UErrorCode *status); + +/** + * Set the subject text string upon which the regular expression is looking for matches + * without changing any other aspect of the matching state. + * The new and previous text strings must have the same content. + * + * This function is intended for use in environments where ICU is operating on + * strings that may move around in memory. It provides a mechanism for notifying + * ICU that the string has been relocated, and providing a new UText to access the + * string in its new position. + * + * Note that the regular expression implementation never copies the underlying text + * of a string being matched, but always operates directly on the original text + * provided by the user. Refreshing simply drops the references to the old text + * and replaces them with references to the new. + * + * Caution: this function is normally used only by very specialized + * system-level code. One example use case is with garbage collection + * that moves the text in memory. + * + * @param regexp The compiled regular expression. + * @param text The new (moved) text string. + * @param status Receives errors detected by this function. + * + * @stable ICU 4.8 + */ +U_STABLE void U_EXPORT2 +uregex_refreshUText(URegularExpression *regexp, + UText *text, + UErrorCode *status); + +/** + * Attempts to match the input string against the pattern. + * To succeed, the match must extend to the end of the string, + * or cover the complete match region. + * + * If startIndex >= zero the match operation starts at the specified + * index and must extend to the end of the input string. Any region + * that has been specified is reset. + * + * If startIndex == -1 the match must cover the input region, or the entire + * input string if no region has been set. This directly corresponds to + * Matcher.matches() in Java * * @param regexp The compiled regular expression. - * @param startIndex The input string index at which to begin matching. + * @param startIndex The input string (native) index at which to begin matching, or -1 + * to match the input Region. * @param status Receives errors detected by this function. * @return TRUE if there is a match - * @draft ICU 3.0 + * @stable ICU 3.0 */ -U_DRAFT UBool U_EXPORT2 +U_STABLE UBool U_EXPORT2 uregex_matches(URegularExpression *regexp, int32_t startIndex, UErrorCode *status); +/** + * 64bit version of uregex_matches. + * Attempts to match the input string against the pattern. + * To succeed, the match must extend to the end of the string, + * or cover the complete match region. + * + * If startIndex >= zero the match operation starts at the specified + * index and must extend to the end of the input string. Any region + * that has been specified is reset. + * + * If startIndex == -1 the match must cover the input region, or the entire + * input string if no region has been set. This directly corresponds to + * Matcher.matches() in Java + * + * @param regexp The compiled regular expression. + * @param startIndex The input string (native) index at which to begin matching, or -1 + * to match the input Region. + * @param status Receives errors detected by this function. + * @return TRUE if there is a match + * @stable ICU 4.6 + */ +U_STABLE UBool U_EXPORT2 +uregex_matches64(URegularExpression *regexp, + int64_t startIndex, + UErrorCode *status); + /** * Attempts to match the input string, starting from the specified index, against the pattern. * The match may be of any length, and is not required to extend to the end * of the input string. Contrast with uregex_matches(). * + *
If startIndex is >= 0 any input region that was set for this + * URegularExpression is reset before the operation begins. + * + *
If the specified starting index == -1 the match begins at the start of the input + * region, or at the start of the full string if no region has been specified. + * This corresponds directly with Matcher.lookingAt() in Java. + * *
If the match succeeds then more information can be obtained via the
* uregexp_start(), uregexp_end(),
- * and uregexp_group() functions.
uregex_group() functions.
*
* @param regexp The compiled regular expression.
- * @param startIndex The input string index at which to begin matching.
+ * @param startIndex The input string (native) index at which to begin matching, or
+ * -1 to match the Input Region
* @param status A reference to a UErrorCode to receive any errors.
* @return TRUE if there is a match.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT UBool U_EXPORT2
+U_STABLE UBool U_EXPORT2
uregex_lookingAt(URegularExpression *regexp,
int32_t startIndex,
UErrorCode *status);
+/**
+ * 64bit version of uregex_lookingAt.
+ * Attempts to match the input string, starting from the specified index, against the pattern.
+ * The match may be of any length, and is not required to extend to the end
+ * of the input string. Contrast with uregex_matches().
+ *
+ * If startIndex is >= 0 any input region that was set for this + * URegularExpression is reset before the operation begins. + * + *
If the specified starting index == -1 the match begins at the start of the input + * region, or at the start of the full string if no region has been specified. + * This corresponds directly with Matcher.lookingAt() in Java. + * + *
If the match succeeds then more information can be obtained via the
+ * uregexp_start(), uregexp_end(),
+ * and uregex_group() functions.
uregex_start(), uregex_end(), and
* uregex_group() will provide more information regarding the match.
*
* @param regexp The compiled regular expression.
- * @param startIndex The position in the input string to begin the search
+ * @param startIndex The position (native) in the input string to begin the search, or
+ * -1 to search within the Input Region.
* @param status A reference to a UErrorCode to receive any errors.
* @return TRUE if a match is found.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT UBool U_EXPORT2
+U_STABLE UBool U_EXPORT2
uregex_find(URegularExpression *regexp,
int32_t startIndex,
UErrorCode *status);
/**
- * Find the next pattern match in the input string.
- * Begin searching the input at the location following the end of
- * the previous match, or at the start of the string if there is no previous match.
- * If a match is found, uregex_start(), uregex_end(), and
+ * 64bit version of uregex_find.
+ * Find the first matching substring of the input string that matches the pattern.
+ * If startIndex is >= zero the search for a match begins at the specified index,
+ * and any match region is reset. This corresponds directly with
+ * Matcher.find(startIndex) in Java.
+ *
+ * If startIndex == -1 the search begins at the start of the input region,
+ * or at the start of the full string if no region has been specified.
+ *
+ * If a match is found, uregex_start(), uregex_end(), and
+ * uregex_group() will provide more information regarding the match.
+ *
+ * @param regexp The compiled regular expression.
+ * @param startIndex The position (native) in the input string to begin the search, or
+ * -1 to search within the Input Region.
+ * @param status A reference to a UErrorCode to receive any errors.
+ * @return TRUE if a match is found.
+ * @stable ICU 4.6
+ */
+U_STABLE UBool U_EXPORT2
+uregex_find64(URegularExpression *regexp,
+ int64_t startIndex,
+ UErrorCode *status);
+
+/**
+ * Find the next pattern match in the input string. Begin searching
+ * the input at the location following the end of he previous match,
+ * or at the start of the string (or region) if there is no
+ * previous match. If a match is found, uregex_start(), uregex_end(), and
* uregex_group() will provide more information regarding the match.
*
* @param regexp The compiled regular expression.
* @param status A reference to a UErrorCode to receive any errors.
* @return TRUE if a match is found.
* @see uregex_reset
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT UBool U_EXPORT2
+U_STABLE UBool U_EXPORT2
uregex_findNext(URegularExpression *regexp,
UErrorCode *status);
@@ -323,12 +603,58 @@ uregex_findNext(URegularExpression *regexp,
* @param regexp The compiled regular expression.
* @param status A reference to a UErrorCode to receive any errors.
* @return the number of capture groups
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT int32_t U_EXPORT2
+U_STABLE int32_t U_EXPORT2
uregex_groupCount(URegularExpression *regexp,
UErrorCode *status);
+/**
+ * Get the group number corresponding to a named capture group.
+ * The returned number can be used with any function that access
+ * capture groups by number.
+ *
+ * The function returns an error status if the specified name does not
+ * appear in the pattern.
+ *
+ * @param regexp The compiled regular expression.
+ * @param groupName The capture group name.
+ * @param nameLength The length of the name, or -1 if the name is a
+ * nul-terminated string.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ *
+ * @stable ICU 55
+ */
+U_STABLE int32_t U_EXPORT2
+uregex_groupNumberFromName(URegularExpression *regexp,
+ const UChar *groupName,
+ int32_t nameLength,
+ UErrorCode *status);
+
+
+/**
+ * Get the group number corresponding to a named capture group.
+ * The returned number can be used with any function that access
+ * capture groups by number.
+ *
+ * The function returns an error status if the specified name does not
+ * appear in the pattern.
+ *
+ * @param regexp The compiled regular expression.
+ * @param groupName The capture group name,
+ * platform invariant characters only.
+ * @param nameLength The length of the name, or -1 if the name is
+ * nul-terminated.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ *
+ * @stable ICU 55
+ */
+U_STABLE int32_t U_EXPORT2
+uregex_groupNumberFromCName(URegularExpression *regexp,
+ const char *groupName,
+ int32_t nameLength,
+ UErrorCode *status);
+
/** Extract the string for the specified matching expression or subexpression.
* Group #0 is the complete string of matched text.
* Group #1 is the text matched by the first set of capturing parentheses.
@@ -343,15 +669,43 @@ uregex_groupCount(URegularExpression *regexp,
* @param status A reference to a UErrorCode to receive any errors.
* @return Length of matching data,
* or -1 if no applicable match.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT int32_t U_EXPORT2
+U_STABLE int32_t U_EXPORT2
uregex_group(URegularExpression *regexp,
int32_t groupNum,
UChar *dest,
int32_t destCapacity,
UErrorCode *status);
+/** Returns a shallow immutable clone of the entire input string with the current index set
+ * to the beginning of the requested capture group. The capture group length is also
+ * returned via groupLength.
+ * Group #0 is the complete string of matched text.
+ * Group #1 is the text matched by the first set of capturing parentheses.
+ *
+ * @param regexp The compiled regular expression.
+ * @param groupNum The capture group to extract. Group 0 is the complete
+ * match. The value of this parameter must be
+ * less than or equal to the number of capture groups in
+ * the pattern.
+ * @param dest A mutable UText in which to store the current input.
+ * If NULL, a new UText will be created as an immutable shallow clone
+ * of the entire input string.
+ * @param groupLength The group length of the desired capture group. Output parameter.
+ * @param status A reference to a UErrorCode to receive any errors.
+ * @return The subject text currently associated with this regular expression.
+ * If a pre-allocated UText was provided, it will always be used and returned.
+
+ *
+ * @stable ICU 4.6
+ */
+U_STABLE UText * U_EXPORT2
+uregex_groupUText(URegularExpression *regexp,
+ int32_t groupNum,
+ UText *dest,
+ int64_t *groupLength,
+ UErrorCode *status);
/**
* Returns the index in the input string of the start of the text matched by the
@@ -363,15 +717,35 @@ uregex_group(URegularExpression *regexp,
* @param regexp The compiled regular expression.
* @param groupNum The capture group number
* @param status A reference to a UErrorCode to receive any errors.
- * @return the starting position in the input of the text matched
+ * @return the starting (native) position in the input of the text matched
* by the specified group.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT int32_t U_EXPORT2
+U_STABLE int32_t U_EXPORT2
uregex_start(URegularExpression *regexp,
int32_t groupNum,
UErrorCode *status);
+/**
+ * 64bit version of uregex_start.
+ * Returns the index in the input string of the start of the text matched by the
+ * specified capture group during the previous match operation. Return -1 if
+ * the capture group was not part of the last match.
+ * Group #0 refers to the complete range of matched text.
+ * Group #1 refers to the text matched by the first set of capturing parentheses.
+ *
+ * @param regexp The compiled regular expression.
+ * @param groupNum The capture group number
+ * @param status A reference to a UErrorCode to receive any errors.
+ * @return the starting (native) position in the input of the text matched
+ * by the specified group.
+ * @stable ICU 4.6
+ */
+U_STABLE int64_t U_EXPORT2
+uregex_start64(URegularExpression *regexp,
+ int32_t groupNum,
+ UErrorCode *status);
+
/**
* Returns the index in the input string of the position following the end
* of the text matched by the specified capture group.
@@ -382,31 +756,305 @@ uregex_start(URegularExpression *regexp,
* @param regexp The compiled regular expression.
* @param groupNum The capture group number
* @param status A reference to a UErrorCode to receive any errors.
- * @return the index of the position following the last matched character.
- * @draft ICU 3.0
+ * @return the (native) index of the position following the last matched character.
+ * @stable ICU 3.0
*/
-U_DRAFT int32_t U_EXPORT2
+U_STABLE int32_t U_EXPORT2
uregex_end(URegularExpression *regexp,
int32_t groupNum,
UErrorCode *status);
+/**
+ * 64bit version of uregex_end.
+ * Returns the index in the input string of the position following the end
+ * of the text matched by the specified capture group.
+ * Return -1 if the capture group was not part of the last match.
+ * Group #0 refers to the complete range of matched text.
+ * Group #1 refers to the text matched by the first set of capturing parentheses.
+ *
+ * @param regexp The compiled regular expression.
+ * @param groupNum The capture group number
+ * @param status A reference to a UErrorCode to receive any errors.
+ * @return the (native) index of the position following the last matched character.
+ * @stable ICU 4.6
+ */
+U_STABLE int64_t U_EXPORT2
+uregex_end64(URegularExpression *regexp,
+ int32_t groupNum,
+ UErrorCode *status);
+
/**
* Reset any saved state from the previous match. Has the effect of
* causing uregex_findNext to begin at the specified index, and causing
* uregex_start(), uregex_end() and uregex_group() to return an error
- * indicating that there is no match information available.
+ * indicating that there is no match information available. Clears any
+ * match region that may have been set.
*
* @param regexp The compiled regular expression.
- * @param index The position in the text at which a
+ * @param index The position (native) in the text at which a
* uregex_findNext() should begin searching.
* @param status A reference to a UErrorCode to receive any errors.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT void U_EXPORT2
+U_STABLE void U_EXPORT2
uregex_reset(URegularExpression *regexp,
int32_t index,
UErrorCode *status);
+/**
+ * 64bit version of uregex_reset.
+ * Reset any saved state from the previous match. Has the effect of
+ * causing uregex_findNext to begin at the specified index, and causing
+ * uregex_start(), uregex_end() and uregex_group() to return an error
+ * indicating that there is no match information available. Clears any
+ * match region that may have been set.
+ *
+ * @param regexp The compiled regular expression.
+ * @param index The position (native) in the text at which a
+ * uregex_findNext() should begin searching.
+ * @param status A reference to a UErrorCode to receive any errors.
+ * @stable ICU 4.6
+ */
+U_STABLE void U_EXPORT2
+uregex_reset64(URegularExpression *regexp,
+ int64_t index,
+ UErrorCode *status);
+
+/**
+ * Sets the limits of the matching region for this URegularExpression.
+ * The region is the part of the input string that will be considered when matching.
+ * Invoking this method resets any saved state from the previous match,
+ * then sets the region to start at the index specified by the start parameter
+ * and end at the index specified by the end parameter.
+ *
+ * Depending on the transparency and anchoring being used (see useTransparentBounds
+ * and useAnchoringBounds), certain constructs such as anchors may behave differently
+ * at or around the boundaries of the region
+ *
+ * The function will fail if start is greater than limit, or if either index
+ * is less than zero or greater than the length of the string being matched.
+ *
+ * @param regexp The compiled regular expression.
+ * @param regionStart The (native) index to begin searches at.
+ * @param regionLimit The (native) index to end searches at (exclusive).
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @stable ICU 4.0
+ */
+U_STABLE void U_EXPORT2
+uregex_setRegion(URegularExpression *regexp,
+ int32_t regionStart,
+ int32_t regionLimit,
+ UErrorCode *status);
+
+/**
+ * 64bit version of uregex_setRegion.
+ * Sets the limits of the matching region for this URegularExpression.
+ * The region is the part of the input string that will be considered when matching.
+ * Invoking this method resets any saved state from the previous match,
+ * then sets the region to start at the index specified by the start parameter
+ * and end at the index specified by the end parameter.
+ *
+ * Depending on the transparency and anchoring being used (see useTransparentBounds
+ * and useAnchoringBounds), certain constructs such as anchors may behave differently
+ * at or around the boundaries of the region
+ *
+ * The function will fail if start is greater than limit, or if either index
+ * is less than zero or greater than the length of the string being matched.
+ *
+ * @param regexp The compiled regular expression.
+ * @param regionStart The (native) index to begin searches at.
+ * @param regionLimit The (native) index to end searches at (exclusive).
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @stable ICU 4.6
+ */
+U_STABLE void U_EXPORT2
+uregex_setRegion64(URegularExpression *regexp,
+ int64_t regionStart,
+ int64_t regionLimit,
+ UErrorCode *status);
+
+/**
+ * Set the matching region and the starting index for subsequent matches
+ * in a single operation.
+ * This is useful because the usual function for setting the starting
+ * index, urgex_reset(), also resets any region limits.
+ *
+ * @param regexp The compiled regular expression.
+ * @param regionStart The (native) index to begin searches at.
+ * @param regionLimit The (native) index to end searches at (exclusive).
+ * @param startIndex The index in the input text at which the next
+ * match operation should begin.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @stable ICU 4.6
+ */
+U_STABLE void U_EXPORT2
+uregex_setRegionAndStart(URegularExpression *regexp,
+ int64_t regionStart,
+ int64_t regionLimit,
+ int64_t startIndex,
+ UErrorCode *status);
+
+/**
+ * Reports the start index of the matching region. Any matches found are limited to
+ * to the region bounded by regionStart (inclusive) and regionEnd (exclusive).
+ *
+ * @param regexp The compiled regular expression.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @return The starting (native) index of this matcher's region.
+ * @stable ICU 4.0
+ */
+U_STABLE int32_t U_EXPORT2
+uregex_regionStart(const URegularExpression *regexp,
+ UErrorCode *status);
+
+/**
+ * 64bit version of uregex_regionStart.
+ * Reports the start index of the matching region. Any matches found are limited to
+ * to the region bounded by regionStart (inclusive) and regionEnd (exclusive).
+ *
+ * @param regexp The compiled regular expression.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @return The starting (native) index of this matcher's region.
+ * @stable ICU 4.6
+ */
+U_STABLE int64_t U_EXPORT2
+uregex_regionStart64(const URegularExpression *regexp,
+ UErrorCode *status);
+
+/**
+ * Reports the end index (exclusive) of the matching region for this URegularExpression.
+ * Any matches found are limited to to the region bounded by regionStart (inclusive)
+ * and regionEnd (exclusive).
+ *
+ * @param regexp The compiled regular expression.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @return The ending point (native) of this matcher's region.
+ * @stable ICU 4.0
+ */
+U_STABLE int32_t U_EXPORT2
+uregex_regionEnd(const URegularExpression *regexp,
+ UErrorCode *status);
+
+/**
+ * 64bit version of uregex_regionEnd.
+ * Reports the end index (exclusive) of the matching region for this URegularExpression.
+ * Any matches found are limited to to the region bounded by regionStart (inclusive)
+ * and regionEnd (exclusive).
+ *
+ * @param regexp The compiled regular expression.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @return The ending point (native) of this matcher's region.
+ * @stable ICU 4.6
+ */
+U_STABLE int64_t U_EXPORT2
+uregex_regionEnd64(const URegularExpression *regexp,
+ UErrorCode *status);
+
+/**
+ * Queries the transparency of region bounds for this URegularExpression.
+ * See useTransparentBounds for a description of transparent and opaque bounds.
+ * By default, matching boundaries are opaque.
+ *
+ * @param regexp The compiled regular expression.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @return TRUE if this matcher is using opaque bounds, false if it is not.
+ * @stable ICU 4.0
+ */
+U_STABLE UBool U_EXPORT2
+uregex_hasTransparentBounds(const URegularExpression *regexp,
+ UErrorCode *status);
+
+
+/**
+ * Sets the transparency of region bounds for this URegularExpression.
+ * Invoking this function with an argument of TRUE will set matches to use transparent bounds.
+ * If the boolean argument is FALSE, then opaque bounds will be used.
+ *
+ * Using transparent bounds, the boundaries of the matching region are transparent
+ * to lookahead, lookbehind, and boundary matching constructs. Those constructs can
+ * see text beyond the boundaries of the region while checking for a match.
+ *
+ * With opaque bounds, no text outside of the matching region is visible to lookahead,
+ * lookbehind, and boundary matching constructs.
+ *
+ * By default, opaque bounds are used.
+ *
+ * @param regexp The compiled regular expression.
+ * @param b TRUE for transparent bounds; FALSE for opaque bounds
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @stable ICU 4.0
+ **/
+U_STABLE void U_EXPORT2
+uregex_useTransparentBounds(URegularExpression *regexp,
+ UBool b,
+ UErrorCode *status);
+
+
+/**
+ * Return true if this URegularExpression is using anchoring bounds.
+ * By default, anchoring region bounds are used.
+ *
+ * @param regexp The compiled regular expression.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @return TRUE if this matcher is using anchoring bounds.
+ * @stable ICU 4.0
+ */
+U_STABLE UBool U_EXPORT2
+uregex_hasAnchoringBounds(const URegularExpression *regexp,
+ UErrorCode *status);
+
+
+/**
+ * Set whether this URegularExpression is using Anchoring Bounds for its region.
+ * With anchoring bounds, pattern anchors such as ^ and $ will match at the start
+ * and end of the region. Without Anchoring Bounds, anchors will only match at
+ * the positions they would in the complete text.
+ *
+ * Anchoring Bounds are the default for regions.
+ *
+ * @param regexp The compiled regular expression.
+ * @param b TRUE if to enable anchoring bounds; FALSE to disable them.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @stable ICU 4.0
+ */
+U_STABLE void U_EXPORT2
+uregex_useAnchoringBounds(URegularExpression *regexp,
+ UBool b,
+ UErrorCode *status);
+
+/**
+ * Return TRUE if the most recent matching operation touched the
+ * end of the text being processed. In this case, additional input text could
+ * change the results of that match.
+ *
+ * @param regexp The compiled regular expression.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @return TRUE if the most recent match hit the end of input
+ * @stable ICU 4.0
+ */
+U_STABLE UBool U_EXPORT2
+uregex_hitEnd(const URegularExpression *regexp,
+ UErrorCode *status);
+
+/**
+ * Return TRUE the most recent match succeeded and additional input could cause
+ * it to fail. If this function returns false and a match was found, then more input
+ * might change the match but the match won't be lost. If a match was not found,
+ * then requireEnd has no meaning.
+ *
+ * @param regexp The compiled regular expression.
+ * @param status A pointer to a UErrorCode to receive any errors.
+ * @return TRUE if more input could cause the most recent match to no longer match.
+ * @stable ICU 4.0
+ */
+U_STABLE UBool U_EXPORT2
+uregex_requireEnd(const URegularExpression *regexp,
+ UErrorCode *status);
+
+
+
+
+
/**
* Replaces every substring of the input that matches the pattern
* with the given replacement string. This is a convenience function that
@@ -423,22 +1071,48 @@ uregex_reset(URegularExpression *regexp,
* @param replacementLength The length of the replacement string, or
* -1 if it is NUL terminated.
* @param destBuf A (UChar *) buffer that will receive the result.
- * @param destCapacity The capacity of the desitnation buffer.
+ * @param destCapacity The capacity of the destination buffer.
* @param status A reference to a UErrorCode to receive any errors.
* @return The length of the string resulting from the find
* and replace operation. In the event that the
* destination capacity is inadequate, the return value
* is still the full length of the untruncated string.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT int32_t U_EXPORT2
+U_STABLE int32_t U_EXPORT2
uregex_replaceAll(URegularExpression *regexp,
- UChar *replacementText,
+ const UChar *replacementText,
int32_t replacementLength,
UChar *destBuf,
int32_t destCapacity,
UErrorCode *status);
+/**
+ * Replaces every substring of the input that matches the pattern
+ * with the given replacement string. This is a convenience function that
+ * provides a complete find-and-replace-all operation.
+ *
+ * This method scans the input string looking for matches of the pattern.
+ * Input that is not part of any match is copied unchanged to the
+ * destination buffer. Matched regions are replaced in the output
+ * buffer by the replacement string. The replacement string may contain
+ * references to capture groups; these take the form of $1, $2, etc.
+ *
+ * @param regexp The compiled regular expression.
+ * @param replacement A string containing the replacement text.
+ * @param dest A mutable UText that will receive the result.
+ * If NULL, a new UText will be created (which may not be mutable).
+ * @param status A reference to a UErrorCode to receive any errors.
+ * @return A UText containing the results of the find and replace.
+ * If a pre-allocated UText was provided, it will always be used and returned.
+ *
+ * @stable ICU 4.6
+ */
+U_STABLE UText * U_EXPORT2
+uregex_replaceAllUText(URegularExpression *regexp,
+ UText *replacement,
+ UText *dest,
+ UErrorCode *status);
/**
* Replaces the first substring of the input that matches the pattern
@@ -456,22 +1130,48 @@ uregex_replaceAll(URegularExpression *regexp,
* @param replacementLength The length of the replacement string, or
* -1 if it is NUL terminated.
* @param destBuf A (UChar *) buffer that will receive the result.
- * @param destCapacity The capacity of the desitnation buffer.
+ * @param destCapacity The capacity of the destination buffer.
* @param status a reference to a UErrorCode to receive any errors.
* @return The length of the string resulting from the find
* and replace operation. In the event that the
* destination capacity is inadequate, the return value
* is still the full length of the untruncated string.
- * @draft ICU 3.0
+ * @stable ICU 3.0
*/
-U_DRAFT int32_t U_EXPORT2
+U_STABLE int32_t U_EXPORT2
uregex_replaceFirst(URegularExpression *regexp,
- UChar *replacementText,
+ const UChar *replacementText,
int32_t replacementLength,
UChar *destBuf,
int32_t destCapacity,
UErrorCode *status);
+/**
+ * Replaces the first substring of the input that matches the pattern
+ * with the given replacement string. This is a convenience function that
+ * provides a complete find-and-replace operation.
+ *
+ * This method scans the input string looking for a match of the pattern.
+ * All input that is not part of the match is copied unchanged to the
+ * destination buffer. The matched region is replaced in the output
+ * buffer by the replacement string. The replacement string may contain
+ * references to capture groups; these take the form of $1, $2, etc.
+ *
+ * @param regexp The compiled regular expression.
+ * @param replacement A string containing the replacement text.
+ * @param dest A mutable UText that will receive the result.
+ * If NULL, a new UText will be created (which may not be mutable).
+ * @param status A reference to a UErrorCode to receive any errors.
+ * @return A UText containing the results of the find and replace.
+ * If a pre-allocated UText was provided, it will always be used and returned.
+ *
+ * @stable ICU 4.6
+ */
+U_STABLE UText * U_EXPORT2
+uregex_replaceFirstUText(URegularExpression *regexp,
+ UText *replacement,
+ UText *dest,
+ UErrorCode *status);
/**
* Implements a replace operation intended to be used as part of an
@@ -516,17 +1216,44 @@ uregex_replaceFirst(URegularExpression *regexp,
* destCapacity is inadequate, the full length of the
* untruncated output string is returned.
*
- * @draft ICU 3.0
+ * @stable ICU 3.0
*
*/
-U_DRAFT int32_t U_EXPORT2
+U_STABLE int32_t U_EXPORT2
uregex_appendReplacement(URegularExpression *regexp,
- UChar *replacementText,
- int32_t replacementLength,
- UChar **destBuf,
- int32_t *destCapacity,
- UErrorCode *status);
+ const UChar *replacementText,
+ int32_t replacementLength,
+ UChar **destBuf,
+ int32_t *destCapacity,
+ UErrorCode *status);
+/**
+ * Implements a replace operation intended to be used as part of an
+ * incremental find-and-replace.
+ *
+ * The input string, starting from the end of the previous match and ending at + * the start of the current match, is appended to the destination string. Then the + * replacement string is appended to the output string, + * including handling any substitutions of captured text.
+ * + *For simple, prepackaged, non-incremental find-and-replace + * operations, see replaceFirst() or replaceAll().
+ * + * @param regexp The regular expression object. + * @param replacementText The string that will replace the matched portion of the + * input string as it is copied to the destination buffer. + * The replacement text may contain references ($1, for + * example) to capture groups from the match. + * @param dest A mutable UText that will receive the result. Must not be NULL. + * @param status A reference to a UErrorCode to receive any errors. + * + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_appendReplacementUText(URegularExpression *regexp, + UText *replacementText, + UText *dest, + UErrorCode *status); /** * As the final step in a find-and-replace operation, append the remainder @@ -550,26 +1277,59 @@ uregex_appendReplacement(URegularExpression *regexp, * destCapacity is inadequate, the full length of the * untruncated output string is returned. * - * @draft ICU 3.0 + * @stable ICU 3.0 */ -U_DRAFT int32_t U_EXPORT2 +U_STABLE int32_t U_EXPORT2 uregex_appendTail(URegularExpression *regexp, UChar **destBuf, int32_t *destCapacity, UErrorCode *status); - - +/** + * As the final step in a find-and-replace operation, append the remainder + * of the input string, starting at the position following the last match, + * to the destination string.uregex_appendTailUText() is intended
+ * to be invoked after one or more invocations of the
+ * uregex_appendReplacementUText() function.
+ *
+ * @param regexp The regular expression object. This is needed to
+ * obtain the input string and with the position
+ * of the last match within it.
+ * @param dest A mutable UText that will receive the result. Must not be NULL.
+ *
+ * @param status Error code
+ *
+ * @return The destination UText.
+ *
+ * @stable ICU 4.6
+ */
+U_STABLE UText * U_EXPORT2
+uregex_appendTailUText(URegularExpression *regexp,
+ UText *dest,
+ UErrorCode *status);
/**
* Split a string into fields. Somewhat like split() from Perl.
* The pattern matches identify delimiters that separate the input
* into fields. The input data between the matches becomes the
* fields themselves.
- * + * * Each of the fields is copied from the input string to the destination - * buffer, and the NUL terminated. The position of each field within + * buffer, and NUL terminated. The position of each field within * the destination buffer is returned in the destFields array. + * + * If the delimiter pattern includes capture groups, the captured text will + * also appear in the destination array of output strings, interspersed + * with the fields. This is similar to Perl, but differs from Java, + * which ignores the presence of capture groups in the pattern. + * + * Trailing empty fields will always be returned, assuming sufficient + * destination capacity. This differs from the default behavior for Java + * and Perl where trailing empty fields are not returned. + * + * The number of strings produced by the split operation is returned. + * This count includes the strings from capture groups in the delimiter pattern. + * This behavior differs from Java, which ignores capture groups. * * @param regexp The compiled regular expression. * @param destBuf A (UChar *) buffer to receive the fields that @@ -597,25 +1357,9 @@ uregex_appendTail(URegularExpression *regexp, * positions are used. * @param status A reference to a UErrorCode to receive any errors. * @return The number of fields into which the input string was split. - * @draft ICU 3.0 - * - * Note: another choice for the design of this function would be to not - * copy the resulting fields at all, but to return indexes and - * lengths within the source text. - * Advantages would be - * o Faster. No Copying. - * o Nothing extra needed when field data may contain embedded NUL chars. - * o Less memory needed if working on large data. - * Disadvantages - * o Less consistent with C++ split, which copies into an - * array of UnicodeStrings. - * o No NUL termination, extracted fields would be less convenient - * to use in most cases. - * o Possible problems in the future, when support Unicode Normalization - * could cause the fields to not correspond exactly to - * a range of the source text. + * @stable ICU 3.0 */ -U_DRAFT int32_t U_EXPORT2 +U_STABLE int32_t U_EXPORT2 uregex_split( URegularExpression *regexp, UChar *destBuf, int32_t destCapacity, @@ -624,7 +1368,247 @@ uregex_split( URegularExpression *regexp, int32_t destFieldsCapacity, UErrorCode *status); + /** + * Split a string into fields. Somewhat like split() from Perl. + * The pattern matches identify delimiters that separate the input + * into fields. The input data between the matches becomes the + * fields themselves. + *
+ * The behavior of this function is not very closely aligned with uregex_split(); + * instead, it is based on (and implemented directly on top of) the C++ split method. + * + * @param regexp The compiled regular expression. + * @param destFields An array of mutable UText structs to receive the results of the split. + * If a field is NULL, a new UText is allocated to contain the results for + * that field. This new UText is not guaranteed to be mutable. + * @param destFieldsCapacity The number of elements in the destination array. + * If the number of fields found is less than destCapacity, the + * extra strings in the destination array are not altered. + * If the number of destination strings is less than the number + * of fields, the trailing part of the input string, including any + * field delimiters, is placed in the last destination string. + * This behavior mimics that of Perl. It is not an error condition, and no + * error status is returned when all destField positions are used. + * @param status A reference to a UErrorCode to receive any errors. + * @return The number of fields into which the input string was split. + * + * @stable ICU 4.6 + */ +U_STABLE int32_t U_EXPORT2 +uregex_splitUText(URegularExpression *regexp, + UText *destFields[], + int32_t destFieldsCapacity, + UErrorCode *status); +/** + * Set a processing time limit for match operations with this URegularExpression. + * + * Some patterns, when matching certain strings, can run in exponential time. + * For practical purposes, the match operation may appear to be in an + * infinite loop. + * When a limit is set a match operation will fail with an error if the + * limit is exceeded. + *
+ * The units of the limit are steps of the match engine. + * Correspondence with actual processor time will depend on the speed + * of the processor and the details of the specific pattern, but will + * typically be on the order of milliseconds. + *
+ * By default, the matching time is not limited. + *
+ * + * @param regexp The compiled regular expression. + * @param limit The limit value, or 0 for no limit. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_setTimeLimit(URegularExpression *regexp, + int32_t limit, + UErrorCode *status); + +/** + * Get the time limit for for matches with this URegularExpression. + * A return value of zero indicates that there is no limit. + * + * @param regexp The compiled regular expression. + * @param status A reference to a UErrorCode to receive any errors. + * @return the maximum allowed time for a match, in units of processing steps. + * @stable ICU 4.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_getTimeLimit(const URegularExpression *regexp, + UErrorCode *status); + +/** + * Set the amount of heap storage available for use by the match backtracking stack. + *
+ * ICU uses a backtracking regular expression engine, with the backtrack stack + * maintained on the heap. This function sets the limit to the amount of memory + * that can be used for this purpose. A backtracking stack overflow will + * result in an error from the match operation that caused it. + *
+ * A limit is desirable because a malicious or poorly designed pattern can use + * excessive memory, potentially crashing the process. A limit is enabled + * by default. + *
+ * @param regexp The compiled regular expression. + * @param limit The maximum size, in bytes, of the matching backtrack stack. + * A value of zero means no limit. + * The limit must be greater than or equal to zero. + * @param status A reference to a UErrorCode to receive any errors. + * + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_setStackLimit(URegularExpression *regexp, + int32_t limit, + UErrorCode *status); + +/** + * Get the size of the heap storage available for use by the back tracking stack. + * + * @return the maximum backtracking stack size, in bytes, or zero if the + * stack size is unlimited. + * @stable ICU 4.0 + */ +U_STABLE int32_t U_EXPORT2 +uregex_getStackLimit(const URegularExpression *regexp, + UErrorCode *status); + + +/** + * Function pointer for a regular expression matching callback function. + * When set, a callback function will be called periodically during matching + * operations. If the call back function returns FALSE, the matching + * operation will be terminated early. + * + * Note: the callback function must not call other functions on this + * URegularExpression. + * + * @param context context pointer. The callback function will be invoked + * with the context specified at the time that + * uregex_setMatchCallback() is called. + * @param steps the accumulated processing time, in match steps, + * for this matching operation. + * @return TRUE to continue the matching operation. + * FALSE to terminate the matching operation. + * @stable ICU 4.0 + */ +U_CDECL_BEGIN +typedef UBool U_CALLCONV URegexMatchCallback ( + const void *context, + int32_t steps); +U_CDECL_END + +/** + * Set a callback function for this URegularExpression. + * During matching operations the function will be called periodically, + * giving the application the opportunity to terminate a long-running + * match. + * + * @param regexp The compiled regular expression. + * @param callback A pointer to the user-supplied callback function. + * @param context User context pointer. The value supplied at the + * time the callback function is set will be saved + * and passed to the callback each time that it is called. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_setMatchCallback(URegularExpression *regexp, + URegexMatchCallback *callback, + const void *context, + UErrorCode *status); + + +/** + * Get the callback function for this URegularExpression. + * + * @param regexp The compiled regular expression. + * @param callback Out parameter, receives a pointer to the user-supplied + * callback function. + * @param context Out parameter, receives the user context pointer that + * was set when uregex_setMatchCallback() was called. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.0 + */ +U_STABLE void U_EXPORT2 +uregex_getMatchCallback(const URegularExpression *regexp, + URegexMatchCallback **callback, + const void **context, + UErrorCode *status); + +/** + * Function pointer for a regular expression find callback function. + * + * When set, a callback function will be called during a find operation + * and for operations that depend on find, such as findNext, split and some replace + * operations like replaceFirst. + * The callback will usually be called after each attempt at a match, but this is not a + * guarantee that the callback will be invoked at each character. For finds where the + * match engine is invoked at each character, this may be close to true, but less likely + * for more optimized loops where the pattern is known to only start, and the match + * engine invoked, at certain characters. + * When invoked, this callback will specify the index at which a match operation is about + * to be attempted, giving the application the opportunity to terminate a long-running + * find operation. + * + * If the call back function returns FALSE, the find operation will be terminated early. + * + * Note: the callback function must not call other functions on this + * URegularExpression + * + * @param context context pointer. The callback function will be invoked + * with the context specified at the time that + * uregex_setFindProgressCallback() is called. + * @param matchIndex the next index at which a match attempt will be attempted for this + * find operation. If this callback interrupts the search, this is the + * index at which a find/findNext operation may be re-initiated. + * @return TRUE to continue the matching operation. + * FALSE to terminate the matching operation. + * @stable ICU 4.6 + */ +U_CDECL_BEGIN +typedef UBool U_CALLCONV URegexFindProgressCallback ( + const void *context, + int64_t matchIndex); +U_CDECL_END + + +/** + * Set the find progress callback function for this URegularExpression. + * + * @param regexp The compiled regular expression. + * @param callback A pointer to the user-supplied callback function. + * @param context User context pointer. The value supplied at the + * time the callback function is set will be saved + * and passed to the callback each time that it is called. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_setFindProgressCallback(URegularExpression *regexp, + URegexFindProgressCallback *callback, + const void *context, + UErrorCode *status); + +/** + * Get the find progress callback function for this URegularExpression. + * + * @param regexp The compiled regular expression. + * @param callback Out parameter, receives a pointer to the user-supplied + * callback function. + * @param context Out parameter, receives the user context pointer that + * was set when uregex_setFindProgressCallback() was called. + * @param status A reference to a UErrorCode to receive any errors. + * @stable ICU 4.6 + */ +U_STABLE void U_EXPORT2 +uregex_getFindProgressCallback(const URegularExpression *regexp, + URegexFindProgressCallback **callback, + const void **context, + UErrorCode *status); #endif /* !UCONFIG_NO_REGULAR_EXPRESSIONS */ #endif /* UREGEX_H */